Éditeur(s) : HAL CCSD
Résumé : The mantle deformation processes that control the thinning and break-up of continental lithosphere remain poorly understood. Our knowledge is restricted to either lithospheric scale thermo-mechanical models --that use experimentally derived flow laws--, geophysical imaging and/or rare xenoliths from active continental rifts, such as the East African Rift System. The originality of this work relies on the study of the two largest outcrops of diamond facies subcontinental lithospheric mantle in the world: the Beni Bousera and Ronda peridotite massifs in N Morocco and S Spain, respectively. The structures and petrologic and metamorphic zoning preserved in these massifs --implying a polybaric and polythermal evolution-- provides a unique opportunity to investigate the thermo-mechanical evolution of thick subcontinental lithospheric mantle in extensional settings. In this thesis we studied the deformation mechanisms in both peridotites and pyroxenites to constrain the modes of exhumation of subcontinental lithospheric mantle from garnet-, to spinel-, and finally, to plagioclase lherzolite facies conditions. We combined field mapping of tectonometamorphic domains and structural mapping of ductile structures, microstructural analysis, crystal preferred orientations (CPO) measurements and conventional thermobarometric calculations and thermodynamic modeling (Perple_X) to unravel the pressure and temperature conditions of deformation. We showed that exhumation from garnet- to spinel lherzolite facies conditions was accommodated by fast shearing --in thermal disequilibrium--along a lithospheric scale transtensional shear zone. In this context, the petrological zoning and the large temperature gradient (ca. 100ºC/km) preserved in the Beni Bousera massif represent the mechanical juxtaposition of progressively deeper and hotter lithospheric levels at depths of ca. 60 km in the latest Oligocene (ca. 25 Ma). Final exhumation from spinel- to plagioclase facies lherzolite and emplacement into the crust is best recorded in the Ronda massif where it occurred by inversion and lithospheric scale folding of the highly attenuated continental lithosphere in a back-arc region, probably in relation with southward slab rollback and subsequent collision with the palaeo-Maghrebien passive margin in the early Miocene (21-23 Ma).
Les processus de déformation contrôlant l'amincissement de la lithosphère continentale sont encore mal contraints. Nos connaissances sont principalement basées sur la modélisation thermomécanique d'extension à l'échelle de la lithosphère--utilisant des lois rhéologiques derivées expérimentalement, l'imagerie géophysique et l'analyse de xénolithes provenant de rift continentaux actifs à ce jour, tels que le Rift Est-Africain. L'originalité de ce travail reside dans l'étude des deux plus grands massifs de péridotites sous-continentales ayant enregistrées des conditions primaires du facies à diamant: les massifs de Beni Bousera au nord du Maroc et de Ronda au sud de l'Espagne, respectivement. Les structures et la zonation petrologique et métamorphique --impliquant une évolution polybarique et polythermique-- préservéees dans ces massifs offrent une opportunité unique pour étudier l'évolution thermo-mécanique du manteau sous-continental dans un contexte extensif. Dans ce travail, nous avons étudié les mécanismes de déformation des péridotites et des pyroxénites afin de contraindre les modes d'exhumation du manteau lithosphérique sous-continental, depuis des conditions du facies des lherzolites à grenat, jusqu'au facies à spinelle et enfin à plagioclase. Nous avons combiné la cartographie des faciès tectono-métamorphiques et des structures ductiles de déformation, l'analyse des microstructures, la mesure d'orientations préférentielles de réseau (OPR), et la géothermobarométrie conventionelle couplée à la modélisation thermodynamique (PerpleX) afin de contraindre les conditions de pression et température de la déformation. Nous avons montré que l'exhumation précoce du facies à grenat au facies à spinelle était accomodée par une faille transtensive affectant le manteau lithosphérique. Dans ce contexte, la zonation tectono-métamorphique et le gradient thermique important (ca. 100ºC/km) préservés à Beni Bousera résultent de la juxtaposition mécanique de domaines lithosphériques initialement équilibrés à différentes pressions et températures, fossilisée à une profondeur de ca. 60 km durant l'Oligocène supérieur (ca. 25 Ma). L'exhumation finale du facies de lherzolite à spinelle au facies à plagioclase et l'emplacement final dans la croûte, mieux enregistrés dans Ronda, se sont produits par inversion et plissement de la section lithosphérique fortement amincie dans un contexte arrière-arc, probablement lors du retrait vers le sud de la lithosphère subduite et la collision de l'arc avec les paléo-marges maghrébines au Miocène inférieur (21-23 Ma).
https://tel.archives-ouvertes.fr/tel-00767700

tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700
https://tel.archives-ouvertes.fr/tel-00767700/document
https://tel.archives-ouvertes.fr/tel-00767700/file/THESE_Frets.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Abstract View references (38)Silicalite-1 (S-1) and ZSM-5 membranes prepared by secondary growth on tubular ceramic supports were tested using a pervaporation set up for the desalination of aqueous solutions containing NaCl in concentrations corresponding to brackish (0.3-1wt%), sea (3.5wt%) and brine (7.5-15wt%) water. ZSM-5 membranes delivered higher water fluxes when compared with S-1 membranes due to enhanced hydrophilicity of the Al-rich zeolite structure leading to fluxes as high as 11.5kgm -2h -1 for 0.3wt% NaCl feed solutions at 75°C. At higher salt concentration the water flux decreased alongside with the salt rejection rate, however the hydrophilic ZMS-5 membrane became more susceptible to performance loss, particularly at high temperatures. Detailed stability experiments carried out for up to 560h showed the dissolution of both S-1 and ZSM-5 top layers. This was attributed to the combined effects of ion exchange and water dissolution mechanisms. Interesting though, the MFI structure zeolite was still observed on the XRD patterns whilst EDX depth profile showed the presence of silica up to 30μm depth into the support. These results suggest the formation/infiltration of a compact amorphous phase in the substrate, derived from the aggregation of the dissolved silicate species and possibly together with the arrangement of MFI nano-slabs during the desalination tests. Despite generating lower water fluxes, the S-1 membrane exhibited relatively high robustness under the long term testing conditions which included temperature cycling, delivering salt rejections from initial >99% to <80% at the end of the testing period (560h). © 2012 Elsevier B.V.
ISSN: 0376-7388

hal-01683201
https://hal.univ-antilles.fr/hal-01683201
DOI : 10.1016/j.memsci.2012.05.074

Éditeur(s) : HAL CCSD
Résumé : The northern Mirdita ophiolite massifs in Albanian Dinarides formed at a slow-spreading ridge, active during the Jurassic (160–165 Ma). They share a common horizontal Jurassic–Lower Cretaceous sedimentary cover showing that they were not deeply and intrinsically affected by later Alpine thrusting. The western massifs of Mirdita, first oceanic core complex (OCC) and detachment shear zone described in ophiolites, compare with OCCs in slow-spreading ridges and provide continuous exposure of the deep internal structure of this system, revealing its kinematics, thanks to detailed structural mapping in peridotites and gabbros. The Mirdita detachments root in the Moho transition zone (MTZ), a weak zone at the top of asthenospheric mantle, where basaltic melts impregnate dunites. The OCC domes are plagioclase-amphibole–bearing mylonitic peridotites, ∼400 m thick, grading downward within 200 m to harzburgitic mantle. The mylonitic detachments crossed Moho beneath a NNE-SSW–trending ridge. On the western side of OCC domes, the hanging wall of the ridge, crustal gabbros, and basalts are still preserved, despite being deeply affected by hydrothermal alteration. From there, the partially molten MTZ was detached as a shear zone, mixing with lower gabbros. The OCC emerged, migrating upsection and eastward over 5 km. Finally, the OCC front is observed in hornblende-rich syntectonic mylonites derived from upper gabbros and from the overlying former lid. Serpentinization is static within these mylonites. A low-temperature detachment fault is expressed as a sheared antigoritic mélange at the margin of the mylonitic shear zone. Asthenospheric flow in the harzburgitic mantle beneath the ridge of origin has been preserved below the OCC rooting. The dominant asthenospheric flow direction trends parallel to the ridge axis. This mantle flow rotates over 200 m into the low-temperature mylonitic detachments, where OCC motion turns transversal to the ridge. Crystal preferred orientation measurements on six samples point to brown hornblende crystal growth during mylonitic flow and illustrate the change of olivine intra-crystalline slip system in mylonites compared to porphyroclastic harzburgite.
ISSN: 1553-040X

hal-01504440
https://hal.archives-ouvertes.fr/hal-01504440
DOI : 10.1130/GES01383.1

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We provide new insights into the geochemistry of serpentinites from the Alpine orogenic wedge representing a paleo-subduction zone. These serpentinites are derived from similar oceanic protoliths, but they have experienced different metamorphic conditions related to three different structural levels of the paleo-subduction zone ((1) obducted: Chenaillet ophiolite, (2) accretionary wedge: Queyras Schistes lustrés complex and (3) serpentinite channel: Monviso ophiolite). Metamorphism undergone by these three units is well defined, increasing eastward from sub-greenschist to eclogite facies conditions, and allows us to examine trace element behavior from the oceanic ridge environment to subduction. Serpentinites first record moderate trace element enrichment due to seawater interaction resulting in the replacement of olivine and pyroxene by chrysotile and lizardite below 300 °C. In the sediment-dominated accretionary wedge, serpentinites are strongly enriched in fluid-mobile-elements (B, Li, As, Sb, and Cs) and act as a trapping system following the metamorphic gradient (from 300 to 390 °C) up to total replacement of the lizardite/chrysotile assemblage by antigorite. Under higher temperature conditions (T > 390 °C), no enrichment was observed, and some fluid-mobile elements were released (B, Li, Cs, and Sr). Moreover, in the serpentinite channel (T > 460 °C), most of the fluid-mobile elements are absent due to the scarcity of metasediments which prevent geochemical exchange between metasediments and serpentinites. This is also due to the onset of antigorite breakdown and the release of fluid-mobile elements. Thus, we emphasize that the geochemistry of Alpine serpentinites is strongly dependent on (1) the grade of metamorphism and (2) the ability of metasediments to supply fluid-mobile elements. We conclude that serpentinites act as a trap-and-release system for fluid-mobile elements in a subduction context.
ISSN: 0009-2541

hal-00996839
https://hal.archives-ouvertes.fr/hal-00996839
DOI : 10.1016/j.chemgeo.2013.02.008

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We report chlorine (Cl) and fluorine (F) abundances in minerals, interstitial glasses, and melt inclusions in 12 andesite-hosted, spinel harzburgite xenoliths and crosscutting pyroxenite veins exhumed from the sub-arc lithospheric mantle beneath Avacha volcano in the Kamchatka Arc (NE Russia). The data are used to calculate equilibrium mineral-melt partition coefficients (Dmineral/meltDmineral/melt) for Cl and F relevant to subduction-zone processes and unravel the history of volatile depletion and enrichment mechanisms in an arc setting.Chlorine is ∼100 times more incompatible in pyroxenes (View the MathML sourceDClmineral/melt = 0.005–0.008 [±0.002–0.003]) than F (View the MathML sourceDFmineral/melt = 0.50–0.57 [±0.21–0.24]), which indicates that partial melting of mantle sources leads to strong depletions in Cl relative to F in the residues. The data set in this study suggests a strong control of melt composition on View the MathML sourceDCl,Fpyroxene/melt, in particular H2O contents and Al/(Al + Si), which is in line with recent experiments. Fluorine is compatible in Ca-amphibole in the ‘wet’ sub-arc mantle (View the MathML sourceDFamphibole/melt = 3.5–3.7 [±1.5]) but not Cl (View the MathML sourceDClamphibole/melt = 0.03–0.05 [±0.01–0.03]), indicating that amphibole may fractionate F from Cl in the mantle wedge. The inter-mineral partition coefficients for Cl and F in this study are consistent amongst different harzburgite samples, whether they contain glass or not. In particular, disseminated amphibole hosts much of the Cl and F bulk rock budgets of spinel harzburgites (View the MathML sourceDClamphibole/pyroxene up to 14 and View the MathML sourceDFamphibole/pyroxene up to 40). Chlorine and fluorine are variably enriched (up to 1500 ppm Cl and 750 ppm F) in the parental arc picrite and boninite melts of primitive pyroxenite veins (and related melt inclusions) crosscutting spinel harzburgites.Based on the data in this study, the main inferences on the behaviour of Cl and F during melting and metasomatic processes in the sub-arc mantle are as follow:(i) Melting models show that most depleted mantle protoliths of intra-oceanic arc sources can have extremely low Cl/F (0.002–0.007) before being overprinted by subduction-derived components.(ii) Chlorine has a higher percolation distance in the mantle than F. Even for small fluid or melt volumes, Cl and F signatures of partial melting are overprinted by those of pervasive percolation, which increases Cl/F in percolating agents and bulk peridotites during chromatographic interaction and/or amphibole-forming metasomatic reactions. These processes ultimately control the bulk Cl and F compositions of the residual mantle lithosphere beneath arcs, and likely in other tectonic settings.(iii) Fluxed melting models suggest that Cl enrichment in arc picrite and boninite melts in this study, and in many arc melt inclusions reported in the literature, could be related to the infiltration of high Cl/F fluids derived from subducted serpentinite or altered crust in mantle wedge sources. However, these high Cl/F signatures should be re-evaluated with new models in light of the possible overprint of pervasive percolation effects in the mantle. The breakdown of amphibole (and/or mica) in the deep metasomatised mantle at higher pressure and temperature conditions than in the slab may explain, at least in part, the positive correlations between F abundances and Cl/F in primitive arc melt inclusions and slab depth.
ISSN: 0016-7037

hal-01553610
https://hal.archives-ouvertes.fr/hal-01553610
DOI : 10.1016/j.gca.2016.10.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
New U–Pb monazite, zircon, and xenotime ages date the Late Carboniferous crystallization of the anatectic Vialais granite in the Montagne Noire Axial Zone and the high-temperature deformation and metamorphism of the augen gneiss (Ordovician granite protolith) from which the granite was likely derived. The U–Pb monazite ages obtained from the augen gneiss (308 ± 3 Ma), late kinematic Vialais granite (303 ± 4 Ma), and post-kinematic leucogranite (298 ± 2 Ma), bracket the high-temperature deformation and metamorphism at ~ 310–300 Ma, clearly postdating regional contraction and nappe emplacement (> 320 Ma). The planar–linear and locally linear fabrics in the augen gneiss outline a regional-scale double dome structure (Caroux and Espinouse sub-domes) containing smaller (km-scale) upright folds. Compared to the Caroux sub-dome, the larger, migmatitic Espinouse sub-dome contains abundant leucosome, leucogranite bodies and late-kinematic intrusions (Vialais granite). The Vialais granite displays a weak magmatic foliation that defines the main layering of the Espinouse migmatite. Ellipsoidal quartz–sillimanite nodules concentrated above the roof of the granite recorded an increment of strain (vertical shortening, E–NE elongation) during granite emplacement and crystallization, consistent with the extension event that exhumed the domes. These new geochronological and structural data suggest that the Montagne Noire double dome formed in a pull-apart structure within a dextral strike–slip system. Upright folding in the sub-domes has been traditionally assigned to a regional contraction event; alternatively, we propose that local contraction is associated with the convergence of low-viscosity crust beneath the upper crust pull-apart. Dynamic models of extension of hot crust indicate that contraction at depth is generated by flow of low-viscosity orogenic crust converging and rising to fill the gap created by upper crust extension. This interpretation solves the long-standing problem of apparent coeval contraction and extension in the Montagne Noire double dome and establishes migmatite dome emplacement in strike–slip corridors as a style of late Variscan tectonics.
ISSN: 0040-1951

insu-01112009
https://hal-insu.archives-ouvertes.fr/insu-01112009
DOI : 10.1016/j.tecto.2014.12.002

Éditeur(s) : Elsevier Science Bv
Résumé : We developed a growth model for Crassostrea gigas oyster shells based on the use of in situ temporal manganese markings to calibrate natural cathodoluminescence (CL) changes in the shell hinge sections. A 30 min to 4-h exposure period with Mn2+ (90-120 mg l(-1)) was sufficient to create a detectable mark in the shells. This makes the Mn2+ markings the fastest mollusc shells marking technique to date. The natural CL from juvenile and adult shells cultured in four standard shellfish-farming locations along the English Channel and French Atlantic coasts, exhibited a seasonal pattern (maximum CL intensity occurring during summer periods, minimum CL intensity occurring during winter). Hydrobiological data recorded at Baie des Veys site allows us to attribute the seawater temperature as the main parameter controlling CL of shells. Chlorophyll a and seawater manganese concentration were not decisive in the luminescence intensity of the shells. A relationship between oyster hinge growth and the length of shells makes the umbo investigations a promising tool for oyster-farming and/or wild stock assessments. Shell growth varied at spatial and temporal scales (higher growth rates were observed during summer-autumn and lower during the winter period), depending on seawater temperature changes. Sub-monthly Mn2+ markings support the fact that shell deposition can occur under temperatures below 6 degrees C, which has to be taken into account for both shellfish production and environmental monitoring derived from chemical compositions of the shells. Finally, our results point out the efficiency of age and shell growth rate determination by CL analysis in further shellfish ecosystem researches.
Aquaculture (0044-8486) (Elsevier Science Bv), 2010-02 , Vol. 300 , N. 1-4 , P. 206-217

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00002/11300/7912.pdf
DOI:10.1016/j.aquaculture.2009.12.018
http://archimer.ifremer.fr/doc/00002/11300/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A high-resolution record of paleostorm events along the French Mediterranean coast over the past 7000 years was established from a lagoonal sediment core in the Gulf of Lions. Integrating grain size, faunal analysis, clay mineralogy and geochemistry data with a chronology derived from radiocarbon dating, we recorded seven periods of increased storm activity at 6300-6100, 5650-5400, 4400-4050, 3650-3200, 2800-2600, 1950-1400 and 400-50 cal yr BP (in the Little Ice Age). In contrast, our results show that the Medieval Climate Anomaly (1150-650 cal yr BP) was characterised by low storm activity.;The evidence for high storm activity in the NW Mediterranean Sea is in agreement with the changes in coastal hydrodynamics observed over the Eastern North Atlantic and seems to correspond to Holocene cooling-in the North Atlantic. Periods of low SSTs there may have led to a stronger meridional temperature gradient and a southward migration of the westerlies. We hypothesise that the increase in storm activity during Holocene cold events over the North Atlantic and Mediterranean regions was probably due to an increase in the thermal gradient that led to an enhanced lower tropospheric baroclinicity over a large Central Atlantic-European domain. (C) 2011 University of Washington. Published by Elsevier Inc. All rights reserved.
ISSN: 0033-5894

hal-00760909
https://hal.archives-ouvertes.fr/hal-00760909
DOI : 10.1016/j.yqres.2011.09.002

Éditeur(s) : Springer
Résumé : While it is well known that the ocean is one of the most important component of the climate system, with a heat capacity 1,100 times greater than the atmosphere, the ocean is also the primary reservoir for freshwater transport to the atmosphere and largest component of the global water cycle. Two new satellite sensors, the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius SAC-D missions, are now providing the first space-borne measurements of the sea surface salinity (SSS). In this paper, we present examples demonstrating how SMOS-derived SSS data are being used to better characterize key land–ocean and atmosphere–ocean interaction processes that occur within the marine hydrological cycle. In particular, SMOS with its ocean mapping capability provides observations across the world’s largest tropical ocean fresh pool regions, and we discuss from intraseasonal to interannual precipitation impacts as well as large-scale river runoff from the Amazon–Orinoco and Congo rivers and its offshore advection. Synergistic multi-satellite analyses of these new surface salinity data sets combined with sea surface temperature, dynamical height and currents from altimetry, surface wind, ocean color, rainfall estimates, and in situ observations are shown to yield new freshwater budget insight. Finally, SSS observations from the SMOS and Aquarius/SAC-D sensors are combined to examine the response of the upper ocean to tropical cyclone passage including the potential role that a freshwater-induced upper ocean barrier layer may play in modulating surface cooling and enthalpy flux in tropical cyclone track regions.
Surveys In Geophysics (0169-3298) (Springer), 2014-05 , Vol. 35 , N. 3 , P. 681-722

Droits : Springer Science+Business Media Dordrecht 2013
http://archimer.ifremer.fr/doc/00152/26334/24430.pdf
DOI:10.1007/s10712-013-9244-0
http://archimer.ifremer.fr/doc/00152/26334/

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : The Oman ophiolite consists of several massifs cropping out along a 500 km long band trending NW-SE along the coast of Oman; it is one of the best exposed sections of oceanic crust and mantle in the world. There is a gradient in igneous processes and composition in the ophiolite, with the northern massifs recording a polygenetic igneous history involving an increasingly important subduction component, whereas the southern massifs were formed primarily via a mid-ocean ridge basalt (MORB)-like, single-stage process at a submarine spreading ridge. In this study we use geochemical data from Wadi Tayin, which is one of the southern massifs of the Oman ophiolite, to constrain the composition and genesis of oceanic crust and upper mantle. The Wadi Tayin harzburgites are residues of partial melting that are as depleted as the most depleted mid-ocean ridge peridotites. They have low middle- to heavy rare earth element ratios, most probably reflecting melting close to and beyond the exhaustion of clinopyroxene. Like many abyssal peridotites, the Wadi Tayin samples show enrichment in highly incompatible elements, giving rise to U-shaped MORB-normalized trace element patterns. We favor the idea that this is caused by enrichment of highly incompatible elements along grain boundaries in peridotite, which may be the result of near-equilibrium partitioning between grain boundaries and grain interiors, rather than disequilibrium processes. Equilibrium partitioning between crystals and grain boundaries during melting and melt extraction is also our preferred explanation for ubiquitous high Pb contents relative to Ce and La in our samples as well as in most abyssal peridotites. The Wadi Tayin samples record substantial variability in terms of osmium isotopic composition and platinum group element (PGE) concentrations. The more radiogenic nature of the dunites and impregnated peridotites compared with the residual harzburgites may be due to relatively high Os-187/Os-188 in melt transported through the dunites. The presence of residual peridotites with whole-rock osmium isotopic compositions less radiogenic than MORB may be explained by melting of a veined (upwelling) mantle forming mixed melts in which much of the Os derives from veins with high Re/Os in a matrix of previously depleted peridotite. An important result of this study is that the shallowest samples are refertilized (i.e. anomalously enriched in incompatible elements), and record relatively high metamorphic closure temperatures. These observations suggest that migrating melt underwent crystallization during rapid cooling in the uppermost mantle during and immediately after ridge magmatism. A variety of geothermometers all yield the result that the stratigraphically highest harzburgites equilibrated at higher temperature than the deeper ones. The systematic decrease in closure temperature with increasing depth below the Moho transition zone probably reflects systematic variation in cooling rate as a function of depth in the mantle section. We hypothesize that the refertilization and higher closure temperatures recorded by the uppermost mantle samples are linked. More rapid cooling led to higher closure temperatures, and to partial crystallization of migrating melts in the shallowest part of the mantle section, yielding slightly elevated abundances of elements such as Ca and Na, and incompatible trace elements.
ISSN: 0022-3530

hal-00456056
https://hal.archives-ouvertes.fr/hal-00456056
DOI : 10.1093/petrology/egp077

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
The chemical and isotopic compositions of clay minerals such as illite and chlorite are commonly used to quantify diagenetic and low-grade metamorphic conditions, an approach that is also used in the present study of the Monte Perdido thrust fault from the South Pyrenean fold-and-thrust belt. The Monte Perdido thrust fault is a shallow thrust juxtaposing upper Cretaceous-Paleocene platform carbonates and Lower Eocene marls and turbidites from the Jaca basin. The core zone of the fault, about 6 m thick, consists of intensely deformed clay-bearing rocks bounded by major shear surfaces. Illite and chlorite are the main hydrous minerals in the fault zone. Illite is oriented along cleavage planes while chlorite formed along shear veins (<50 μm in thickness). Authigenic chlorite provides essential information about the origin of fluids and their temperature. δ18O and δD values of newly formed chlorite support equilibration with sedimentary interstitial water, directly derived from the local hanging wall and footwall during deformation. Given the absence of large-scale fluid flow, the mineralization observed in the thrust faults records the P-T conditions of thrust activity. Temperatures of chlorite formation of about 240°C are obtained via two independent methods: chlorite compositional thermometers and oxygen isotope fractionation between cogenetic chlorite and quartz. Burial depth conditions of 7 km are determined for the Monte Perdido thrust reactivation, coupling calculated temperature and fluid inclusion isochores. The present study demonstrates that both isotopic and thermodynamic methods applied to clay minerals formed in thrust fault are useful to help constrain diagenetic and low-grade metamorphic conditions.
ISSN: 0010-7999

hal-00757736
https://hal.archives-ouvertes.fr/hal-00757736
DOI : 10.1007/s00410-011-0718-0

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Deformation of the continental lithosphere is traditionally modeled assuming that heat production in the subcontinental lithospheric mantle is negligible. Although this may be appropriate for highly depleted Archean lithosphere, studies of mantle xenoliths and lithospheric-derived mafic rocks suggest that heat productions of up to 0.4 ;μW/m3 may be attained in the mantle of Phanerozoic and Neoproterozoic regions due to modal metasomatism. To investigate the effect of a local enrichment in heat-producing elements within the lithospheric mantle on the continental deformation, we performed a series of 2D thermo-mechanical models simulating the deformation of a lithospheric plate 1000 km long, which contains in its central part a 200 km wide and 20 km-thick mantle layer with a heat production of 0.05;–0.25 ;μW/m3 between 40 and 80 km depth, leading to a local enhancement of the surface heat flow by 1;–5 mW/m2. Compression models show that a 20 km-thick layer with a heat production as low as 0.05 ;μW/m3 within the shallow lithospheric mantle leads to strain localization in both the enriched mantle and the overlying crust. Strain localization depends exponentially on the temperature increase in the lithosphere section, which is controlled by the volume of metasomatized mantle and the intensity of the metasomatic enrichment in heat-producing elements. A heat production of 0.25 μW/m3 between 60 and 80 km depth results, for instance, in strains within and above the metasomatized mantle 5 times higher than in the surrounding lithosphere. Strain localization also depends on the location of the heat-producing domain and on the plate rheological structure; deeper heat-producing domains and weaker plates leading to stronger localization. These results provide an explanation for strain localization in intraplate environments, leading to the formation of orogenic belts situated hundreds to thousands of kilometers away from known plate boundaries, as observed in the Neoproterozoic belts of Gondwana and in the present-day deformation of the Asian plate.
ISSN: 0012-821X

hal-00411386
https://hal.archives-ouvertes.fr/hal-00411386
DOI : 10.1016/j.epsl.2008.07.040

Éditeur(s) : HAL CCSD
Résumé : International audience
In boundary lubrication regime, friction reduction and antiwear processes are associated to the presence of additives in the lubricating oils or greases. These processes are due to the formation of protective tribofilms resulting from chemical reactions between the additives and the sliding surfaces, in the physico-chemical conditions of the sliding contact. Conventional antiwear additives mainly consist of transition metal organo phosphate or thiophosphates which present a remarkable efficiency in the case of contacts between ferrous alloys. In the case of non reacting surfaces, these additives become inactive. Recently developped lubrication strategies consist in the use of dispersion in oils of nano additives able to build the protective tribofilm in the sliding contact without reaction with the surfaces. Carbon fluorinated phases, due to their lamellar structure and their high chemical stability even at relatively high temperature (400°C) represent interesting candidates as lubricant nano-additives subjected to present friction reduction, anti wear and anti corrosion actions. This work presents the tribologic behaviour of some carbon fluorinated derivatives such as graphite fluorides, fluorinated carbon nanofibers, fluorinated carbon nanodiscs and fluorinated carbon blacks. The influence, on the tribologic performances, of the structure of the initial carbon phases, of the fluorination rate (0
World Tribology Congress 2013
Torino, Italy

Droits : info:eu-repo/semantics/OpenAccess
hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514
https://hal.archives-ouvertes.fr/hal-00926514/document
https://hal.archives-ouvertes.fr/hal-00926514/file/Delbe_9783.pdf
OATAO : 9783

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : International audience
During the development of the Variscan orogeny, large amounts of granitic melt were produced, giving rise to the intrusion of granitoids at different structural levels. Despite numerous studies, ages available from previous work on the Cevennes granites remain largely imprecise. In order to better constrain the age and emplacement mode of these granites, we have combined U-Pb dating on monazites and zircons and Ar-40/Ar-39 dating on biotites with petrological observations, major element chemical analysis and SEM zircon imaging on five samples from the Aigoual-St Guiral-Liron and Mont Lozere granitic massifs. The results revealed that granitic intrusions and cooling in Southern Cevennes occurred in a short time span at similar to 306 Ma after the main episode of regional metamorphism. Petrological and chemical data suggest that they result from a mixing between mantle-derived basic magmas (lamprophyres) and lower crust acid magmas. At a regional scale the production of these melts occurred at the end of crustal thickening induced by nappe stacking, at the same time as the late anatectic events recorded further north in the Velay dome and the granulite facies metamorphism recorded in metasedimentary granulite enclaves brought up by Tertiary volcanoes of the Velay area (Bournac).
ISSN: 1437-3254

hal-00412183
https://hal.archives-ouvertes.fr/hal-00412183
DOI : 10.1007/s00531-007-0187-x

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Sensitive instruments like strainmeters and tiltmeters are necessary for measuring slowly varying low amplitude Earth deformations. Nonetheless, laser and fibre interferometers are particularly suitable for interrogating such instruments due to their extreme precision and accuracy. In this paper, a practical design of a simple pendulum borehole tiltmeter based on laser fibre interferometric displacement sensors is presented. A prototype instrument has been constructed using welded borosilicate with a pendulum length of 0.85 m resulting in a main resonance frequency of 0.6 Hz. By implementing three coplanar extrinsic fibre Fabry-Perot in-terferometric probes and appropriate signal filtering, our instrument provides tilt measurements that are insensitive to parasitic deformations caused by temperature and pressure variations. This prototype has been installed in an underground facility (Rustrel, France) where results show accurate measurements of Earth strains derived from Earth and ocean tides, local hydro-logic effects, as well as local and remote earthquakes. The large dynamic range and the high sensitivity of this tiltmeter render it an invaluable tool for numerous geophysical applications such as transient fault motion, volcanic strain and reservoir monitoring.
ISSN: 0956-540X

hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967
https://hal.archives-ouvertes.fr/hal-01265967/document
https://hal.archives-ouvertes.fr/hal-01265967/file/HCS1.pdf
DOI : 10.1093/gji/ggv358

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Subduction infancy corresponds to the first few million years following subduction initiation, when slabs start their descent into the mantle. It coincides with the transient (yet systematic) transfer of material from the top of the slab to the upper plate, as witnessed by metamorphic soles welded beneath obducted ophiolites. Combining structure–lithology–pressure–temperature–time data from metamorphic soles with flow laws derived from experimental rock mechanics, this study highlights two main successive rheological switches across the subduction interface (mantle wedge vs. basalts, then mantle wedge vs. sediments; at ∼800 °C and ∼600 °C, respectively), during which interplate mechanical coupling is maximized by the existence of transiently similar rheologies across the plate contact. We propose that these rheological switches hinder slab penetration and are responsible for slicing the top of the slab and welding crustal pieces (high- then low-temperature metamorphic soles) to the base of the mantle wedge during subduction infancy. This mechanism has implications for the rheological properties of the crust and mantle (and for transient episodes of accretion/exhumation of HP-LT rocks in mature subduction systems) and highlights the role of fluids in enabling subduction to overcome the early resistance to slab penetration.
ISSN: 0012-821X

hal-01383368
http://hal.upmc.fr/hal-01383368
http://hal.upmc.fr/hal-01383368/document
http://hal.upmc.fr/hal-01383368/file/Agard_2016_Plate_interface.pdf
DOI : 10.1016/j.epsl.2016.06.054

Éditeur(s) : HAL CCSD
Résumé : National audience
The Lesser Antilles subduction zone has produced no recent strong thrust earthquakes, making it difficult to quantify the seismic hazard from such events. The Lesser Antilles arc has a low subduction rate and an accretionary wedge that is very wide at its southern end. To investigate the effect of the wedge on seismogenesis, numerical models of forearc thermal structure were constructed along six transects perpendicular to the arc in order to determine the thermally predicted width of the seismogenic zone. The geometry of each section is constrained by published seismic profiles and crustal models derived from gravity and seismic data and by earthquake hypocenters at depth. A major constraint on the deep part of the model is that mantle temperature beneath the volcanic arc should achieve a temperature of 1,100°C to generate partial melts. Predicted surface heat flow is compared to the available heat flow observations. Thermal modeling results indicate a systematic southward increase in the width of the seismogenic zone, more than doubling in width from north to south and corresponding to a dramatic southward increase in forearc width (distance from the arc to the deformation front of the accretionary wedge). The minimum width of the seismogenic zone (distance between the intersections of the subduction interface with the 150°C and 350°C isotherms) increases from about 80 km, north of 16°N, to 230 km, at 13°N. The maximum width (between the 100°C and 450°C isotherms) ranges from about 150 km in the north to up to 320 km in the south. This large variation in the width of the seismogenic zone is a consequence of the increasing width of the accretionary wedge to the south, caused by the increased thickness of sediment on the subducting plate. There is good agreement between the thermally predicted seismogenic limits and the sparse distribution of recorded thrust earthquakes, which are observed only in the northern portion of the arc. Possible scenarios for mega-thrust earthquakes are discussed. Depending on the segment length (along-strike) of the rupture plane, the occurrence of an event of magnitude 8-9 cannot be excluded.
Bulletin Société Géologique de France

insu-00814056
https://hal-insu.archives-ouvertes.fr/insu-00814056
DOI : 10.2113/gssgfbull.184.1-2.47

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mechanism and kinematics of the Late Mesozoic continental extension event of eastern Asia are still debated. In order to better constrain its evolution, two granodioritic plutons of the Jiaodong Peninsula have been chosen as targets for a time-constrained palaeomagnetic study. Indeed, plutons are devoid of visible deformation, did not experience rotation along horizontal axis and are precisely dated by U/Pb and 40Ar/39Ar methods. Multidomain (MD) magnetite has been identified as the principal magnetic remanent carrier. The interpolation of existing and new U/Pb and 40Ar/39Ar ages revealed that characteristic remanent magnetisation was acquired in a narrow range of 116 ± 2 Ma. Twenty out of 27 sites present stable magnetic directions calculated from high-temperature or high-coercive components. The observations of the solo normal magnetic polarity for this palaeomagnetic collection and of the magnetic remanent age consistent with the Cretaceous Normal Superchron (CNS) argue that the characteristic magnetic remanence may be considered as primary. Detailed field observations of the intrusive relationship between the plutons and country rocks and Anisotropy of Magnetic Susceptibility (AMS) study reveal the absence of the subsequent deformation of plutons, or rigid rotation of plutons along a horizontal axis. Two palaeomagnetic poles have been therefore calculated from these plutons. Among 12 out 15 Cretaceous palaeomagnetic poles, including the two new poles provided by this study, from the Jiaodong Peninsula and on both sides of Tan-Lu and Muping-Jimo faults are statistically consistent. As a result, the Jiaodong Peninsula behaved as a rigid block as internal deformation appears negligible. The remaining three derived poles are probably due to the secular variation or/and the vicinity of fault zones near of the palaeomagnetic sampling site. Thus, they can not be applied to the peninsula-scaled tectonics. Comparison of these time52 constrained Cretaceous palaeomagnetic results of the Jiaodong Peninsula with those of North China Block (NCB) indicate that the Jiaodong Peninsula was rigidly attached to NCB since, 3 at least, the Cretaceous as residual difference is clearly insignificant with respect to the error brackets. These new palaeomagnetic results confirm that the relative clockwise (CW) rotation of Eastern Liaoning-Korea Block (ELKB) with respect to NCB does not affect the Jiaodong Peninsula as a rigid block, nevertheless, some tectonic structures have been reactivated since Cenozoic and local rotations could be produced. This palaeomagnetic study reveals that the Late Mesozoic extension in Eastern Asia is heterogeneously expressed in time and space. The complete understanding of the mechanism(s) of this extensional event needs further multidisciplinary investigations.
ISSN: 0031-9201

insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546
https://hal-insu.archives-ouvertes.fr/insu-00599546/document
https://hal-insu.archives-ouvertes.fr/insu-00599546/file/Charles_et_al_PEPI2011.pdf
DOI : 10.1016/j.pepi.2011.05.006

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Alpine Corsica consists of a stack of variably metamorphosed units of continental and Tethys-derived rocks. It represents an excellent example of high-pressure (HP) orogenic belt, such as the Western Alps, exposed over a small and accessible area. Compared to the Western Alps, the geology of Alpine Corsica is poorly unraveled. During the 1970s-80s, based on either lithostratigraphic or metamorphic field observations, various classifications of the belt have been proposed, but these classifications have been rarely matched together. Furthermore, through time, the internal complexity of large domains has been progressively left aside in the frame of large-scale geodynamic reconstructions. As a consequence, major open questions on the internal structure of the belt have remained unsolved. Apart from a few local studies, Alpine Corsica has not benefited of modern developments in petrology and basin research. This feature results in several uncertainties when combining lithostratigraphic and metamorphic patterns and, consequently, in the definition of an exhaustive architecture of the belt. In this paper we provide a review on the geology of Alpine Corsica, paying particular attention to the available lithostratigraphic and metamorphic classifications of the metamorphic terranes. These data are completed by a new and exhaustive metamorphic dataset obtained by means of thermometry based on Raman Spectroscopy of Carbonaceous Material (RSCM). This technique provides reliable insights on the peak temperature of the metamorphic history for CM-bearing metasediments. A detailed metamorphic characterization of metasediments, which have been previously largely ignored due to retrogression or to the lack of diagnostic mineralogy, is thus obtained and fruitfully coupled with the available lithostratigraphic data. Nine main tectono-metamorphic units are defined, from subgreenschist (ca. 280-300 °C) to the lawsonite-eclogite-facies (ca. 500-550 °C) condition. These units are homogeneous in metamorphism, laterally continuous and have characteristic lithostratigraphic features. This study also suggests a direct link between the pre-orogenic extensional setting and the present-day compressional structure of Alpine Corsica, indicating that large sections of subducted lithosphere were subducted and exhumed as coherent domains. These features provide important insight on the mechanism of stacking and exhumation of HP rocks, and make Alpine Corsica a unique reference for mountain-building processes in Tethyan-type orogens.
ISSN: 0012-8252

hal-00814433
https://hal.archives-ouvertes.fr/hal-00814433
DOI : 10.1016/j.earscirev.2012.10.003

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Before attaining the mantle wedge, where they trigger partial melting, volatiles released from dehydration reactions in the slab have to migrate across a relatively cold (<750 degrees C), peridotite-layer above the incoming slab. In order to unravel the mechanisms allowing for this initial stage of fluid transport, we performed a detailed field and microstructural study of metamorphic prograde peridotites in the Cerro del Almirez ultramafic massif (Betic Cordillera, Spain), where evidences of one of the most important dehydration reactions in subduction zones, the high-pressure antigorite breakdown (P = 1.6-1.9 GPa and T approximate to 680 degrees C), can be mapped in the field. This reaction led to arborescent growth of centimeter-size olivine and orthopyroxene, producing a chlorite-harzburgite with a spinifex-like texture. Microstructural observations and crystal preferred (CPO) mapping show no evidences of solid-state deformation during the prograde growth of olivine and orthopyroxene at the expenses of antigorite. However, a few tens to a hundred meters away from the reaction front, the metamorphic texture is partially obliterated by grain-size reduction in roughly planar conjugate zones, a few mm to meters wide. Grain size reduction zones (GSRZ) are characterized by (1) sharp contacts with undeformed spinifex-like texture domains, (2) important reduction of the olivine grain size (60-250 mu m), (3) olivine color change from brownish to colorless, (4) decrease in the modal amount of orthopyroxene, and (5) at the mm- to cm-scale, irregular shapes and abrupt terminations. Field and microstructural observations exclude that relative displacement took place across these GSRZ. Changes in modal composition imply reactions with fluids undersaturated in silica. Analysis of olivine crystal-preferred orientations (CPO) in GSRZ shows patterns similar, but more dispersed, than those in neighboring spinifex-like domains. It also reveals mm- to cm-scale discrete domains with rather homogeneous crystallographic orientations suggesting inheritance from the preexisting spinifex-like olivines in the host peridotite. Misorientation angles between neighboring grains in the GSRZ show peaks at similar to 5-10 degrees and similar to 20 degrees, but rotations are not crystallographically controlled. Based on these observations, we rule out the formation of the GSRZ by dynamic recrystallization during dislocation creep and propose that they record brittle deformation (microcraking) of the spinifex-like chlorite-harzburgite, probably induced by hydrofracturing at high pressure and relative low temperature conditions (680-710 degrees C). High-pressure hydrofracturing can, thus, be invoked as an efficient mechanism for fluid flow across the cold top-slab mantle layer, hence allowing the slab-derived fluids to ingress in the wedge.
ISSN: 0012-821X

hal-00534035
https://hal.archives-ouvertes.fr/hal-00534035
DOI : 10.1016/j.epsl.2010.06.029