Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Assessing seismic hazards remains one of the most challenging scientific issues in Earthsciences. Deep tectonic processes are classically considered as the only persistentmechanism driving the stress loading of active faults over a seismic cycle. Here we show via amechanical model that erosion also significantly influences the stress loading of thrust faultsat the timescale of a seismic cycle. Indeed, erosion rates of about B0.1–20mmyr1, asdocumented in Taiwan and in other active compressional orogens, can raise the Coulombstress by B0.1–10 bar on the nearby thrust faults over the inter-seismic phase. Masstransfers induced by surface processes in general, during continuous or short-lived andintense events, represent a prominent mechanism for inter-seismic stress loading offaults near the surface. Such stresses are probably sufficient to trigger shallow seismicity orpromote the rupture of deep continental earthquakes up to the surface.
ISSN: 2041-1723

insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103
https://hal-insu.archives-ouvertes.fr/insu-01087103/document
https://hal-insu.archives-ouvertes.fr/insu-01087103/file/Steer2014_NatureComm_accepted.pdf
DOI : 10.1038/ncomms6564

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Gulf of Cadiz lies astride the complex plate boundary between Africa and Eurasia west of the Betic-Rif mountain belt. We report on the results of recent bathymetric swathmapping and multi-channel seismic surveys carried out here. The seafloor is marked by contrasting morphological provinces, spanning the SW Iberian and NW Moroccan continental margins, abyssal plains and an elongate, arcuate, accretionary wedge. A wide variety of tectonic and gravitational processes appear to have shaped these structures. Active compressional deformation of the wedge is suggested by folding and thrusting of the frontal sedimentary layers as well as basal duplexing in deeper internal units. There is evidence for simultaneous gravitational spreading occurring upslope. The very shallow mean surface and basal slopes of the accretionary wedge (1° each) indicate a very weak decollement layer, geometrically similar to the Mediterranean Ridge accretionary complex. Locally steep slopes (up to 10°) indicate strongly focused, active deformation and potential gravitational instabilities. The unusual surface morphology of the upper accretionary wedge includes “raft-tectonics” type fissures and abundant sub-circular depressions. Dissolution and/or diapiric processes are proposed to be involved in the formation of these depressions.
ISSN: 0264-8172

insu-00401683
https://hal-insu.archives-ouvertes.fr/insu-00401683
DOI : 10.1016/j.marpetgeo.2007.11.008

Éditeur(s) : HAL CCSD Taylor & Francis: STM Behavioural Science and Public Health Titles Taylor & Francis: STM, Behavioural Science and Public Health Titles
Résumé : We have investigated by electron tomography, in a transmission electronic microscope, the interactions between dislocations in olivine single crystals and polycrystals deformed in axial compression at T < 1000 °C (T < 0.5Tm). Dislocations are mostly of the [0 0 1] type, except in the polycrystal where [1 0 0] and [0 0 1] dislocations have been activated. A few 〈1 0 1〉 junctions have been found and characterized. Many collinear interactions have been identified either involving direct interactions between crossing dislocations of opposite Burgers vectors or indirect interactions between dislocations gliding in parallel planes and sessile dislocation loops. We suggest that collinear interaction, already identified as the primary source of strain hardening in FCC metals, is the main dislocation interaction mechanism in olivine deformed at temperatures below 1000 °C.
ISSN: 1478-6443

hal-01174166
https://hal.archives-ouvertes.fr/hal-01174166
DOI : 10.1080/14786435.2014.1000996

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Rheological properties of mantle minerals and rocks at temperatures (T) appropriate to much of Earth's lithosphere have remained poorly constrained, even though past experimental studies on olivine single crystals and polycrystalline aggregates have quantified the high-temperature creep mechanisms (T > 1200 degrees C). Consequently, we have performed deformation experiments on crystals of San Carlos olivine at lower temperatures, from 900 degrees to 1200 degrees C, in triaxial compression along the [101](c) direction. The experiments were carried out at a confining pressure of 300 MPa in a high-resolution gas-medium mechanical testing apparatus at differential stresses of 100 to 500 MPa. Several samples were deformed at constant displacement rate and others at constant load, in order to provide insight into possible effects of work-hardening. Under the deformation conditions investigated, little evidence of work-hardening was observed. The data follow a power-law dependence on stress, as in previous high-temperature deformation studies. The samples were, however, considerably weaker than predicted by the experimentally determined high-temperature constitutive equation for olivine crystals of this orientation from the study of Bai et al. (1991). The mechanical behavior correlates instead with the weaker of the two mechanisms (flow laws) that contribute to the high-temperature constitutive equation. Thus, our experiments demonstrate that published high-temperature constitutive equations overestimate the strength of lithospheric mantle and that the transition to low-temperature creep occurs at lower temperatures than previously inferred. Citation: Demouchy, S., S. E. Schneider, S. J. Mackwell, M. E. Zimmerman, and D. L. Kohlstedt (2009), Experimental deformation of olivine single crystals at lithospheric temperatures, Geophys. Res. Lett., 36, L04304, doi: 10.1029/2008GL036611.
ISSN: 0094-8276

hal-00420070
https://hal.archives-ouvertes.fr/hal-00420070
DOI : 10.1029/2008GL036611

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Tectonically controlled landforms develop morphologic features that provide useful markers to investigate crustal deformation and relief growth dynamics. In this paper, we present results of morphotectonic experiments obtained with an innovative approach combining tectonic and surface processes (erosion, transport, and sedimentation), coupled with accurate model monitoring techniques. This approach allows for a qualitative and quantitative analysis of landscape evolution in response to active deformation in the three end-member geological settings: compression, extension, and strike–slip.Experimental results outline first that experimental morphologies evolve significantly at a short time scale. Numerous morphologic markers form continuously, but their lifetime is generally short because erosion and sedimentation processes tend to destroy or bury them. For the compressional setting, the formation of terraces above an active thrust appears mainly controlled by narrowing and incision of the main channel through the uplifting hanging-wall and by avulsion of deposits on fan-like bodies. Terrace formation is irregular even under steady tectonic rates and erosional conditions. Terrace deformation analysis allows retrieving the growth history of the structure and the fault slip rate evolution. For the extensional setting, the dynamics of hanging-wall sedimentary filling appears to control the position of the base level, which in turn controls footwall erosion. Two phases of relief evolution can be evidenced: the first is a phase of relief growth, and the second is a phase of upstream propagation of topographic equilibrium that is reached first in the sedimentary basin. During the phase of relief growth, the formation of triangular facets occurs by degradation of the fault scarp, and their geometry (height) becomes stationary during the phase of upstream propagation of the topographic equilibrium. For the strike–slip setting, the complex morphology of the wrench zone, composed of several interacting fault segments, enhances the interactions with the drainage network. Because of the widening of the main fault zone toward the surface, a significant amount of distributed deformation is observed along the wrench zone. Locally, where two terminations of fault segments interact, less than a quarter of the far field displacement can remain measurable using fault offsets, leading to a systematic underestimation of the real fault slip rate.These different experimental examples illustrate the great potential of the approach coupling deformation mechanisms and erosion–transport–sedimentation processes to investigate qualitatively and quantitatively the morphotectonic evolution of tectonically controlled landscapes.
ISSN: 0169-555X

hal-01243587
https://hal.archives-ouvertes.fr/hal-01243587
DOI : 10.1016/j.geomorph.2015.02.011

Éditeur(s) : Université Européenne de Bretagne
Résumé : The southwest Pacific results from the fragmentation of Gondwanaland since the Cretaceous time. The purpose of the current PhD work is to deepen our understanding of the history of the New Caledonia and Fairway basins, located west of New Caledonia, in order to better constrain the geodynamical evolution of the SW Pacific from Cretaceous to Oligocene. The analysis of new geophysical data has led to distinguish 3 main phases of this fragmentation: 1 Mid Cretaceous formation of the Fairway-Aotea Basin in a continental intra-arc position. The formation of this basin reflects the initial stage of continental fragmentation of the Eastern Gondwana margin. The causes of this fragmentation are to be searched for in a major change of the dynamics of the peri-Pacific subduction zone. 2 Latest late Eocene local deformation of the Northern NCB, synchronously with the New Caledonian obduction. We suggest that as the ophiolitic nappe was being obducted onto New Caledonia, the NC Basin subsided under the effect of the loading and underthrusted to accommodate the compressional deformation as a foreland flexural basin. 3 Regional Eocene Oligocene subsidence of the structures linking NC to New Zealand. The morphostructural style of this deformation leads us to suggest that detachment of the lower crust is the cause of subsidence. We therefore propose a model in which the renewal of the Australia-Pacific convergent plate boundary around 45 Ma would have driven the lithosphere to thicken, leading to a root instability and to its detachment in the mantle. These new results have regional petroleum implications, which are discussed in the PhD.
Le Sud-Ouest Pacifique est le résultat de la fragmentation de la marge Est du Gondwana depuis le Crétacé. L'objet du présent travail de thèse est d'approfondir la connaissance des bassins de Nouvelle-Calédonie et de Fairway, situés à l'Ouest de la NC, afin de préciser l'évolution géodynamique du SO Pacifique du Crétacé à l'Oligocène. L'analyse de nouvelles données géophysiques a permis de dégager 3 étapes de cette fragmentation: 1 Formation du Bassin de Fairway-Aotea au Crétacé moyen en position intra-arc continental. La formation de ce bassin reflète les prémices de la déchirure continentale de la marge Est Gondwanienne dont la cause est à rechercher dans un changement de la dynamique de la subduction. 2 Déformation locale de la partie Nord du BNC à l'Eocène terminal synchrone à l'obduction Néo Calédonienne. Nous proposons ainsi un modèle selon lequel le BNC aurait subsidé et réagi comme un bassin flexural d'avant-pays suivant un processus de sous-charriage, au fur et à mesure que la nappe progressait sur le bâti Calédonien. 3 Subsidence Eocène Oligocène régionale affectant les structures reliant la Nouvelle-Zélande à la NC. Les traits morphostructuraux de cette déformation nous permettent d'émettre l'hypothèse que l'ablation d'une partie de la croûte inférieure de ce système serait responsable de la subsidence. Nous proposons ainsi un modèle dans lequel la reprise de la convergence vers 45 Ma entre les plaques Australienne et Pacifique aurait entraîné un épaississement crustal de l'ensemble aboutissant à une instabilité gravitaire de sa racine et provoquant son détachement dans le manteau. Ces nouveaux résultats ont des implications pour le potentiel pétrolier régional.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2009/these-6520.pdf
http://archimer.ifremer.fr/doc/2009/sup-6520.pdf
http://archimer.ifremer.fr/doc/00000/6520/

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Large-scale periodic undulations within the oceanic and continental lithospheres revealed by a number of observations, are often treated as compressive instabilities, i.e. lithospheric buckling or folding. These undulations are normally associated with intensive faulting, which raises questions on the role of faulting in the folding process, and even on the possibility of folding in highly faulted media. In this study, we demonstrate that folding can "survive" faulting and that both processes may develop concurrently, so that faulting may serve as a mechanism of folding in the brittle domain. We support this hypothesis by direct numerical modeling. The results are compared with the data on three most prominent and well-known cases of the oceanic and continental folding-like deformation ("Indian Ocean" type, "Western Gobi (central Asia)" type and "Central Australian" type). We demonstrate that under reasonable tectonic stresses, folds can develop from faults cutting through the brittle parts of the lithosphere. The predicted wavelengths and nite growth rates are in agreement with the observations. We also show that within a continental lithosphere with thermotectonic age greater than 400 My, either a bi-harmonic mode (two superimposed wavelengths, crustal and mantle one) or a coupled mode (mono-layer deformation) of inelastic folding can develop, depending on the strength and thickness of the lower crust.
ISSN: 0094-8276

ird-00388016
http://hal.ird.fr/ird-00388016
http://hal.ird.fr/ird-00388016/document
http://hal.ird.fr/ird-00388016/file/fig3.pdf
http://hal.ird.fr/ird-00388016/file/fig1.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During compressive events, deformation in sedimentary basins is mainly accommodated by thrust faulting and related fold growth. Thrust faults are generally rooted in the basement and may act as conduits or barriers for crustal fluid flow. Most of recent studies suggest that fluid flow through such discontinuities is not apparent and depends on the structural levels of the thrust within the fold-and-thrust belt. In order to constrain the paleofluid flow through the Jaca thrust-sheet-top basin (Paleogene southwest-Pyrenean fold-and-thrust belt) this study compares on different thrust faults located at different structural levels. The microstructures in the different fault zones studied are similar and consist of pervasive cleavage, calcite shear veins (SV1), extension veins (EV1) and late dilatation veins (EV3). In order to constrain the nature and the source of fluids involved in fluid-rock interactions within fault zones, a geochemical approach, based on oxygen and carbon stable isotope and trace element compositions of calcite from different vein generations and host rocks was adopted. The results suggest a high complexity in the paleohydrological behaviors of thrust faults providing evidence for a fluid-flow compartmentalization within the basin. Previous studies in the southern part of the Axial Zone (North of the Jaca basin) indicates a circulation of deep metamorphic water, probably derived from the Paleozoic basement, along fault zones related to the major basement Gavarnie thrust. In contrast, in northern part of the Jaca basin, the Monte Perdido thrust fault is affected by a closed hydrological fluid system involving formation water during its activity. The Jaca and Cotiella thrust faults, in turn, both located more to the south in the basin, are characterized by a composite fluid flow system. Indeed, stable isotope and trace element compositions of the first generations of calcite veins suggest a relatively closed paleohydrological system, whereas the late calcite vein generations, which are probably associated with the late tectonic activity of the basin, support a contribution of both meteoric and marine waters. Based on these results, a schematic fluid-flow model is presented. This model allows visualization of three main fluid flow compartments along a N-S transect.
ISSN: 0264-8172

hal-00963606
https://hal.archives-ouvertes.fr/hal-00963606
DOI : 10.1016/j.marpetgeo.2013.09.005

Éditeur(s) : Amer Geophysical Union
Résumé : The oblique convergence between North American and Caribbean plates is accommodated in a bookshelf faulting manner by active, oblique-normal faults in the northern part of the Lesser Antilles arc. In the last 20 years, two M > 6 earthquakes occurred along a large, arc parallel, en echelon fault system, the 16 March 1985 in Redonda and 21 November 2004 in Les Saintes. A better understanding of active faulting in this region permit us to review the location and magnitude of historical earthquakes by using a regional seismic attenuation law. Several others moderate earthquakes may have occurred along the en echelon fault system implying a strong seismic hazard along the arc. These faults control the effusion of volcanic products and some earthquakes seem to be correlated in time with volcanic unrest. Shallow earthquakes on intraplate faults induced normal stress and pressure changes around neighboring volcano and may have triggered volcanic activity. The Redonda earthquake could have initiated the 1995 eruption of Montserrat's Soufriere Hills by compressing its plumbing system. Conversely, pressure changes under the volcano increased Coulomb stress changes and brought some faults closer to failure, promoting seismicity. We also discuss the magnitude of the largest 11 January 1839 and 8 February 1843 megathrust interplate earthquakes. We calculate that they have increased the stress on some overriding intraplate faults and the extensional strain beneath several volcanoes. This may explain an increase of volcanic and seismic activity in the second half of the 19th century culminating with the devastating, 1902 Mount Pelee eruption.
Journal Of Geophysical Research-solid Earth (0148-0227) (Amer Geophysical Union), 2011-10 , Vol. 116 , N. B10308 , P. 1-26

Droits : Copyright 2011 by the American Geophysical Union
http://archimer.ifremer.fr/doc/00200/31097/29515.pdf
DOI:10.1029/2011JB008443
http://archimer.ifremer.fr/doc/00200/31097/

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Production rates in horizontal shale gas wells display declines that are controlled by the low permeability and the intrinsic heterogeneity of the shale matrix. We present an original multi-continuum approach that yields a physical model able to reproduce the complexity of the decreasing gas rates. The model describes the dynamics of gas rate as function of the physical reservoir parameters and geometry, while the shale matrix heterogeneity is accounted for by a stochastic description of transmissivity field. From the 3D (Dimensional) problem setting, including the heterogeneous shale matrix, the fractures generated by the hydrofracking operations, as well as the production well characteristics, we establish an effective upscaled 1D model for the gas pressures in fracture and matrix as well as the volumetric flux. We analyse the decline curves behaviour, and we identify the time scales that characterize the dynamics of the gas rate decline using explicit analytical Laplace space solutions of the upscaled process model. Asymptotically, the flux curves decrease exponentially, while in an intermediate regime we find a power-law behaviour, in which the flux scales with a power law in time as (t^{-beta }), where (beta ) reflects the medium heterogeneity. We use this solution to fit a set of real data displaying distinctly different decline trends and study the sensitivity of the model to the reservoir parameters in order to identify their respective controls at the different stages of the decline curve dynamics. Results indicate that the initial value of the gas rate is determined by the transmissivity of the fractures and the initial pressure of the gas in the shale matrix. The latter causes mainly a shift in the entire decline curve. The early time of decline curve shape is primarily controlled by the fracture properties (compressibility and transmissivity). During the main part of the economically valuable production times, i.e. before the production rate drops exponentially, the decline curve is strongly controlled by the properties of the shale rocks including their heterogeneity, which is modelled by two parameters describing the non-Fickian pressure diffusion effects in a stochastic framework.
ISSN: 0169-3913

hal-01217247
https://hal.archives-ouvertes.fr/hal-01217247
DOI : 10.1007/s11242-015-0504-y

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The contourite depositional system (CDS) along the southwestern Iberian Margin (SIM), within the Gulf of Cadiz and offshore areas of western Portugal bear the unmistakable signal of Mediterranean Outflow Water (MOW) exiting the Strait of Gibraltar. This locality records key information concerning the effects of tectonic activity on margin sedimentation, the effects of MOW dynamics on Atlantic circulation, and how these factors may have influenced global climate. Over the last four decades, numerous studies have been conducted on the late Miocene, Pliocene and Quaternary sedimentary stacking pattern of Neogene basins along the SIM for both academic and resources exploration purposes. However, understanding of the region rests primarily on basic seismic stratigraphy calibrated with limited data from only a few exploration wells. The Integrated Ocean Drilling Program (IODP) Expedition 339 recently drilled five sites in the Gulf of Cadiz and two sites on the western Iberian margin. The integration of core and borehole data with other geophysical databases leads us to propose a new stratigraphic framework. Interpretation of IODP Exp. 339 data along with that from industry sources and onshore outcrop analysis helps refine our understanding of the SIM's sedimentary evolution.We identify significant changes in sedimentation style and dominant sedimentary processes, coupled with widespread depositional hiatuses along the SIM within the Cadiz, Sanlucar, Doñana, Algarve and Alentejo basins. Following the 4.5 Ma cessation of a previous phase of tectonic activity related to the Miocene–Pliocene boundary, tectonics continued to influence margin development, downslope sediment transport and CDS evolution. Sedimentary features indicate tectonic pulses of about 0.8–0.9 Ma duration with a pronounced overprint of ~ 2–2.5 Ma cycles. These more protracted cycles relate to the westward rollback of subducted lithosphere at the convergent Africa-Eurasia plate boundary as its previous NW–SE compressional regime shifted to a WNW–ESE direction. Two major compressional events affecting to the Neogene basins at 3.2–3 Ma and 2–2.3 Ma help constrain the three main stages of CDS evolution. The stages include: 1) the initial-drift stage (5.33–3.2 Ma) with a weak MOW, 2) a transitional-drift stage (3.2–2 Ma) and 3) a growth-drift stage (2 Ma-present time) with enhanced MOW circulation into the Atlantic and associated contourite development due to greater bottom-current velocity. Two minor Pleistocene discontinuities at 0.7–0.9 Ma and 0.3–0.6 Ma record the effects of renewed tectonic activity on basin evolution, appearing most prominently in the Doñana basin. Several discontinuities bounding major and minor units appear on seismic profiles. Quaternary records offer the clearest example of this, with major units of about 0.8–0.9 Ma and sub-units of 0.4–0.5 Ma. Sedimentation is controlled by a combination of tectonics, sediment supply, sea-level and climate. This research identifies time scales of tectonic controls on deep-marine sedimentation, specifically over periods of 2.5–> 0.4 Ma. Shorter-term climatic (orbital) mechanisms control sedimentation at time scales of ≤ 0.4 Ma. The role of bottom water circulation and associated processes in shaping the seafloor and controlling the sedimentary stacking pattern on continental margins has to be seriously reconsidered in future multidisciplinary studies. This is not only because of the common occurrence of sandy contourite deposits in deep water setting and their economic interest for hydrocarbon exploration, but principally because they archive the heartbeat of the interior Earth and therefore have important sedimentary and paleoceanographic implications.
ISSN: 0025-3227

hal-01356166
https://hal.archives-ouvertes.fr/hal-01356166
DOI : 10.1016/j.margeo.2015.09.013

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Mongolia represents the northernmost area affected by the India–Asia collision, and it is actively deformed along transpressive belts closely associated with large-scale strike-slip faults. The active and past mantle flow beneath this region is, however, poorly known. In order to investigate deep mantle deformation beneath central Mongolia and its relation with the surrounding major structures such as the Siberian craton, the Gobi–Altay belt and the Baikal rift, a NS-trending profile of broadband seismic stations has been deployed in the summer 2003 from the southern Siberian craton to the Gobi–Altay range, crossing the entire Hangay dome. Mantle flow is deduced from the splitting of teleseismic shear waves such as SKS phases. In eastern Mongolia, the permanent station ULN in Ulaanbaatar reveals the presence of two anisotropic layers, the upper one being oriented NE–SW, close to the trend of lithospheric structures and the lower one NW–SE, close to the trend of Eurasia absolute plate motion. Along the NS profile in central Mongolia, seismic anisotropy deduced from SKS splitting reveals a homogeneous NW–SE trending structure, fully consistent with the observations made in the Altay–Sayan in western Mongolia. The observed delay times of 1.5 to more than 2.0 s favor consistent mantle flow over large mantle thicknesses. Since the lithosphere is less than 100 km thick beneath central Mongolia and since the observed fast directions are parallel to the trend of the lithospheric structures but also close to the trend of the absolute plate motion, we propose that both the lithosphere and the asthenosphere may join their anisotropic effects beneath central Mongolia to explain the large delay times. Although GPS vectors represent the instantaneous displacement of the Earth's surface and SKS splitting the time and vertical integration of finite strain at depth, we use the opportunity of the dense geodetic measurements available in this region to discuss the anisotropy pattern in term of present-day deformation. In the Eurasia-fixed reference frame, GPS and SKS both depict a similar trend beneath central Mongolia, suggesting a lithospheric block “escaping” toward the east that could orient olivine a-axes in the upper mantle, within a transpressive tectonic regime. A different behaviour is observed in western Mongolia: the GPS vectors trend NS, close to the regional compression direction, whereas the fast SKS directions trend EW, suggesting a tectonic regime close to a mode of axial shortening, generating the development of an EW-trending foliation at depth. We therefore propose that Mongolia is a place where active and frozen lithospheric deformation may add their effects, together with the sublithospheric flow. In the three sources of anisotropy inferred, a fundamental role is played by the Siberian craton that acted as an undeformable core of the continent through time: the frozen Paleozoic and Mesozoic structures wrap around the craton, building up the fast anisotropic direction pattern; the present-day sublithospheric flow induced by the plate motion is likely deflecting around its deep roots; finally, the present-day tectonic regime appears to be controlled by the presence of the craton to the north.
ISSN: 0012-821X

hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853
https://hal.archives-ouvertes.fr/hal-00407853/document
https://hal.archives-ouvertes.fr/hal-00407853/file/Barruol_SKS_Mongolia_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.07.027

Éditeur(s) : HAL CCSD Springer Verlag
Résumé : A hypothetical mechanism for the generation of maturation stress in wood was tested experimentally. The hypothesis was that the maturation stress could partly originate in a physical mechanism related to daily changes in water pressure and associated diurnal strains. The matrix of lignin and hemicellulose, deposited in the cell wall during the night, would be put in compression by the effect of water tension during the next day. The cellulose framework, crystallizing during the day, would be put in tension by the decrease in tension at night and subsequent cell-wall swelling. This was tested on young saplings of sugi and beech. Half of the saplings were submitted to continuous lighting, which canceled diurnal strains. Saplings were tilted 40 degrees, and their uprighting movement was measured. The uprighting movement is directly due to the production of reaction wood and the concomitant development of large longitudinal maturation stress. It occurred in the continuously lighted plants at least as much as in control plants. We conclude that the generation of longitudinal maturation stress in tension or compression wood is not directly related to variations in water pressure and diurnal strains.
ISSN: 1435-0211

hal-01031891
https://hal.archives-ouvertes.fr/hal-01031891
DOI : 10.1007/s10086-005-0788-6

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Detailed seafloor mapping in the area east of Taiwan revealed trench-parallel stretching and folding of the Ryukyu forearc and lateral motion of the accretionary wedge under oblique convergence. East of 122ø40'E, a steep accretionary wedge is elongated in an E-W direction. A major transcurrent right-lateral strike-slip fault accommodates the strain partitioning caused by an oblique convergence of 40 ø. A spectacular out-of-sequence thrust may be related to the subduction of a structural high lying in the axis of the N-S trending Gagua Ridge. This asperity is likely responsible for the uplift of the accretionary wedge and forearc basement and may have augmented strain partitioning by increasing the coupling between the two plates. West of 122ø40'E, the low-taper accretionary wedge is sheared in a direction subparallel to the convergence vector with respect to the Ryukyu Arc. The bayonet shape of the southern Ryukyu Arc slope partly results from the recent (re)opening of the southern Okinawa Trough at a rate of about 2 to 4 cm/yr. Right-lateral shearing of the sedimentary forearc with respect to the nonlinear Ryukyu backstop generates trench-parallel extension in the forearc sediment sequence at dilational jogs and trench-parallel folding at compressive jogs. The Hoping Basin lies above a diffuse trench/trench/fault (TTF) or TFF unstable triple junction moving toward the south along a N-S transform zone which accommodates the southward drift of the Ryukyu Arc with respect to Eurasia.
ISSN: 0278-7407

hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555
https://hal.archives-ouvertes.fr/hal-01261555/document
https://hal.archives-ouvertes.fr/hal-01261555/file/Lallemand_et_al-1999-Tectonics.pdf
DOI : 10.1029/1998TC900011

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
This paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates.
ISSN: 0040-1951

hal-01389719
http://hal.univ-reunion.fr/hal-01389719
http://hal.univ-reunion.fr/hal-01389719/document
http://hal.univ-reunion.fr/hal-01389719/file/vauchez_etal_rheology_1998_hal.pdf
DOI : 10.1016/S0040-1951(98)00137-1

Éditeur(s) : HAL CCSD IOP Publishing
Résumé : International audience
Based on the very recent work by Censor and Segal (2009 J. Convex Anal. 16 587-600) and inspired by Xu (2006 Inverse Problems 22 2021-34) and Yang (2004 Inverse Problems 20 1261-6), we investigate an algorithm for solving the split common fixed-point problem for the class of demicontractive operators in a Hilbert space. Our results improve and/or develop previously discussed feasibility problems and related algorithms. It is worth mentioning that the convex feasibility formalism is at the core of the modeling of many inverse problems and has been used to model significant real-world problems, for instance, in sensor networks, in radiation therapy treatment planning, in computerized tomography and data compression, see Censor et al (2006 Phys. Med. Biol. 51 2353-65) and Combettes (1996 Adv. Imaging Electron. Phys. 95 155-270) and references therein.
ISSN: 0266-5611

hal-00778174
https://hal.univ-antilles.fr/hal-00778174
DOI : 10.1088/0266-5611/26/5/055007

Éditeur(s) : HAL CCSD
Résumé : International audience
The Socotra Island belongs to the southern rifted margin of the Gulf of Aden and occupied in Neoproterozoic times a key position to constrain the age and the nature of the largely hidden Neoproterozoic rocks of the Arabian plate. Our integrated field, petrographic, geochemical and geochrono- logical study in the Neoproterozoic rocks recognises three main successive events: (a) high-temperature ductile defor- mation and metamorphism forming probably in a compressive or transpressive regime; (b) mafic to intermediate intrusions as vertical sheets, kilometre-scale gabbro laccoliths, mafic dike swarm and lavas which present mainly a depleted arc signature with some evidences of evolution from an enriched-arc signature; (c) felsic intrusions mainly composed of highly potassic calc-alkaline and pinkish granites dated between 840 and 780 Ma. Relationships between the various petrographic types and U-Pb data suggest that these events occurred during a relatively short time span (80 Ma at max). Earlier high-temperature-low-pressure metamorphism stage as well as geochemical signature of mafic rocks show that development of Cryogenian formations of Socotra were controlled successively by an Andean-arc and a back-arc setting. These features cannot be easily reconciled with those of the Arabian-Nubian shield to the west of Socotra and of the Mozambique Belt to the south. We propose that the Socotra basement was developed at an active margin close to the India block in Cryogenian times.
Arabian Journal of Geoscience

hal-00647487
https://hal.archives-ouvertes.fr/hal-00647487
DOI : 10.1007/s12517-011-0476-3

Éditeur(s) : HAL CCSD Springer Verlag
Résumé :  
Growth strains were measured in situ in nine trees of three species from a French Guiana tropical rainforest in a clearly active verticality restoration process. The aim was to detect tension wood within the samples. Wood specimens were cut in the vicinity of the growth strain measurements in order to determine the microfibril angle and some mechanical and physical properties. As suspected, tensile growth strain was much higher in tension wood zones, as shown by the slightly higher longitudinal modulus of elasticity. Conversely, tension wood showed reduced compression strength. Longitudinal shrinkage was much higher in tension wood than in opposite wood. Clear relationships between the microfibril angle and longitudinal properties were noted in comparison (i) with those observed in gymnosperm compression wood and (ii) with expected relationships from the organization of wood fibres cell wall structure.
ISSN: 0043-7719

hal-01032114
https://hal.archives-ouvertes.fr/hal-01032114
DOI : 10.1007/s00226-010-0323-9

Éditeur(s) : HAL CCSD
Résumé : International audience
The Transbaikal region extends over several hundreds of kilometres east of the Baikal Rift System. It is characterized by a number of sub-parallel Mesozoic grabens or half grabens generally filled with late Jurassic to Early Cretaceous clastic sediments interbedded with coal layers (1). Similar basins occur on an even larger area spanning from the Transbaikal region down to Korea implying a large-scale extensional process affecting most of the Amuria plate during the Mesozoic. In the Transbaikal region, the normal faults controlling the edges of the Mesozoic basins are generally superimposed to Palaeozoic ductile shear zones implying a strong localisation of the extensional deformation on inherited structures. Recent studies, associated to our own fieldwork demonstrated that some of the faults were again activated (2), still as extensional faults, during the Tertiary or Quaternary, and that some of them are presently active. The closure of the Mongol-Okhotsk ocean separating the Siberian plate from the Amurian block during the Mesozoic corresponds to a major event in the growth process of the East Asian continent. The oceanic suture zone is situated on the southern edge of the Transbaikal region and its roughly SW-NE direction is parallel to the basins (3). The timing of the closure of the Mongol-Okhotsk ocean is still highly debated: while sedimentological and tectonic data suggest that the oceanic closure and the following collision occurred in early Middle Jurassic (4), paleomagnetic studies advocate for a Early Cretaceous collision (5). Furthermore, several other questions remain on the localization, the size and the fate of the relief that most probably formed during the collision between the Amuria block and the Siberian craton. In order to answer those questions we used low temperature thermochronology data associated to tectonic, sedimentology and palinology to investigate the evolution of the Transbaikal grabens from Mesozoic to Present. Tectonic and thermochronology data provide evidences of exhumation and erosion along the eastern edge of the Siberian craton during the Middle Jurassic as well as a potential continuum of deformation between the Mesozoic extension and the initiation of the Baikal Rift System (6). Sedimentology and palinology reveals that the sediments deposited in the Transbaikal basin did not registered large-scale compressive deformation during or after their Late Jurassic - Early Cretaceous deposition and that they do not correspond to the dismantling of a strong compressive relief.
Geophysical Research Abstracts
Vienne, Austria

insu-00810487
https://hal-insu.archives-ouvertes.fr/insu-00810487

Éditeur(s) : HAL CCSD AGU and the Geochemical Society
Résumé : International audience
Peridotite xenoliths brought up to the surface by the volcanism of the Kerguelen Islands represent a mantle that has been affected by a high degree of partial melting followed by intense melt percolation above the Kerguelen plume. These xenoliths are therefore particularly suitable to investigate effects of melt-rock interaction on crystallographic fabrics (lattice-preferred orientation (LPO)) of peridotite minerals and on the LPO-induced seismic properties of peridotites above a mantle plume. We have studied a suite of 16 ultramafic samples representative of different degrees of partial melting and magma-rock interaction among which the protogranular harzburgites are the least metasomatised xenoliths and dunites are the ultimate stage of metasomatism. Olivine LPO is characterized by high concentration of [010] axes perpendicular to the foliation and [100] axes close to the lineation or distributed in the foliation plane in harzburgites, whereas the high concentration of [100] axes is parallel to the lineation and [010] axes is perpendicular to the assumed foliation in dunites. Olivine LPO in harzburgites is interpreted as being due to a deformation regime in axial compression or transpression. The fabric strength of olivine decreases progressively from protogranular to poikilitic harzburgites and finally to dunites, for which it remains nevertheless significant (J index 3.8). Seismic properties calculated from LPO of minerals indicate that metasomatism at higher melt/rock ratio lowers the P wave velocities. The most significant difference between harzburgites and dunites corresponds to the distribution of S wave anisotropy. Harzburgites display the maximum of anisotropy within the foliation plane and the minimum of anisotropy perpendicular to the foliation plane, whereas the lowest anisotropy is parallel to the lineation for dunites. These modifications of seismic properties as a result of metasomatic processes may induce seismic heterogeneities in the mantle above the Kerguelen plume. In addition, assuming a lithospheric mantle primarily harzburgitic and structured with a horizontal foliation, the seismic properties calculated for the Kerguelen xenoliths reconcile the rather high anisotropy evidenced by the horizontally propagating surface waves with the apparent isotropy revealed by the absence of splitting of vertically propagating teleseismic SKS waves recorded by the GEOSCOPE Kerguelen station.
ISSN: 1525-2027

hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222
https://hal.archives-ouvertes.fr/hal-00366222/document
https://hal.archives-ouvertes.fr/hal-00366222/file/bascou_Kerguelen_2007GC001879_hal.pdf
DOI : 10.1029/2007GC001879