Éditeur(s) : Université des Antilles Études caribéennes
Résumé : La construction historique des sociétés caribéennes est indissociable des mouvements migratoires séculaires qui les ont animées. Le cadre politico-juridique favorable aux migrations antillaises vers leur métropole rend compte de la vigueur des courants migratoires issus des territoires dépendants de la région ainsi que de leur orientation quasi-exclusive vers les métropoles. La problématique migratoire se pose en des termes différents concernant les territoires indépendants. L’analyse de trois populations caribéennes — les Portoricains, les Franco-antillais, les Haïtiens — interroge la particularité des contextes politico-institutionnels des sociétés d’origine en lien avec les modalités singulières de leur colonisation. Au regard de la remarquable diversité des statuts politiques des territoires de la Caraïbe, l’analyse du lien entre migration et fait colonial nécessite de s’interroger sur l’influence de ces derniers sur la temporalité, l’ampleur, la composition et la spatialisation des mouvements de populations.
The making of Caribbean societies is indissociable from long-term migration movements. The favourable politico-legal framework of Caribbean migrations towards their metropoles accounts for the strength of migration streams from politically dependent territories in the region. It also accounts for their spatial configuration as ‘migratory couples’. The issue is different as far as independent territories are concerned. The analysis of three Caribbean populations – Puerto Ricans, French West Indians, Haitians – questions the particularity of the politico-institutional contexts of source societies in relation with the singular modalities of their colonization. Given the remarkable diversity of political statuses in the Caribbean, the analysis of the relation between migration and the colonial history requires to question the influence of these statuses on the temporality, the scale, the composition and the spatialization of population movements.

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.922
http://journals.openedition.org/etudescaribeennes/922

Éditeur(s) : HAL CCSD American Physical Society (APS)
Résumé : International audience
Diffusion in natural and engineered media is quantified in terms of stochastic models for the heterogeneity-induced fluctuations of particle motion. However, fundamental properties such as ergodicity and self-averaging and their dependence on the disorder distribution are often not known. Here, we investigate these questions for diffusion in quenched disordered media characterized by spatially varying retardation properties, which account for particle retention due to physical or chemical interactions with the medium. We link self-averaging and ergodicity to the disorder sampling efficiency Rn, which quantifies the number of disorder realizations a noise ensemble may sample in a single disorder realization. Diffusion for disorder scenarios characterized by a finite mean transition time is ergodic and self-averaging for any dimension. The strength of the sample to sample fluctuations decreases with increasing spatial dimension. For an infinite mean transition time, particle motion is weakly ergodicity breaking in any dimension because single particles cannot sample the heterogeneity spectrum in finite time. However, even though the noise ensemble is not representative of the single-particle time statistics, subdiffusive motion in q≥2 dimensions is self-averaging, which means that the noise ensemble in a single realization samples a representative part of the heterogeneity spectrum.
ISSN: 2470-0053

hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668
https://hal.archives-ouvertes.fr/hal-01622668v2/document
https://hal.archives-ouvertes.fr/hal-01622668/file/russian2017.pdf
DOI : 10.1103/PhysRevE.96.022156

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
We investigate a class of granular materials characterized by the possibility of interlocking between the particles. The interlocking is modeled by its effect through rolling resistance depending on relative rotation and normal force at the contact points and involving a single parameter analogous to the sliding friction coefficient. The model, which is introduced in the framework of the contact dynamics, method, is applied to simulate the simple shear of a large granular sample. We present a detailed analysis regarding the influence of rolling and sliding friction parameters on the macroscopic response in terms of shear strength, fabric properties, and force transmission. Interestingly, two distinct regimes can be distinguished in which the steady-state shear strength is controlled by either rolling resistance or sliding friction. The relative contributions of rolling and sliding contacts to the shear strength are consistent with the same two regimes. Interlocking strongly affects the force network by enhancing the arching effect and thus increasing the relative importance of weak contact forces and torques, which is reflected in a decreasing power-law probability distribution of the contact forces and torques below the mean. Due to the combined effect of friction and interlocking, the force-carrying backbone takes an increasingly columnar aspect involving a low fraction of particles. Our data suggest that the nature of the weak contact network is strongly affected by the formation of these columns of particles which do not need to be propped laterally. In particular, in the limit of high rolling resistance and sliding friction, the role of the weak network of contacts is no longer to prop the force chains, but, like the strong contact network, to actively sustain the deviatoric load imposed on the system.
ISSN: 1539-3755

hal-00412020
https://hal.archives-ouvertes.fr/hal-00412020
DOI : 10.1103/PhysRevE.78.021301

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : Cette étude souligne l’importance des enjeux touristiques pour les îles tropicales. La singularité des espaces est trop souvent négligée en raison de la vigueur des représentations fantasmées de l’île tropicale qui est perçue tel un lieu paradisiaque, un lieu d’accomplissement de désirs illimités où s’écoule une vie facile, avec ses rivages ensoleillés, entre récifs coralliens et plages de sable blanc bordées de cocotiers. Ces richesses immatérielles reposent sur des ressources bien réelles, abondantes et vulnérables, à l’image des emblématiques récifs coralliens. Certes les destinations insulaires tropicales ne connaissent pas les niveaux de fréquentation des grandes régions du monde, mais leurs flux doivent être reconsidérés au regard des caractéristiques de ces territoires (faible superficie, charge de population, rareté de la terre, limites des ressources) qui nécessitent la définition d’indications spécifiques. Mais l’avènement d’un tourisme de masse dans ces ultimes frontières, ces « Pleasure Periphery » nécessite de s’interroger sur la viabilité des stratégies de développement mises en œuvre autour du tourisme.
This study highlights the importance of tourism issues for the tropical islands. The singularity of the spaces is too often overlooked because of the strength of fantasized representations of the tropical island which is seen as a paradise, a place of accomplishment desires unlimited with an easy life, with its sunny shores, between coral reefs and white sandy beaches lined with coconut trees. These intangible wealth are based on real resources, abundant and vulnerable, like the emblematic image of coral reefs. Although the tropical island destinations are not supported the weight of the major touristic regions of the world but their flows should be reconsidered in the light of the characteristics of these territories (small size, load population, shortage of land, limits of resources) that require defining specific indicators. But the advent of mass tourism in these last frontiers, these "Pleasure Periphery" needs to question the sustainability of tourism development strategies.

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.852
http://journals.openedition.org/etudescaribeennes/852

Éditeur(s) : HAL CCSD Ferrata Storti Foundation
Résumé : International audience
The aim of the study was to determine the factors associated with resting and exercise-induced hemoglobin oxygen desaturation. The well-established six-minute walk test was conducted in 107 sickle cell children (50 with sickle hemoglobin C disease and 57 with sickle cell anemia) at steady state. Hemoglobin oxygen saturation was measured before and immediately after the six-minute walk test. Blood samples were obtained on the same day to measure hematologic and hemorheological parameters. Exercise-induced hemoglobin oxygen desaturation was defined as a drop in hemoglobin oxygen saturation of 3% or more at the end of the six-minute walk test compared to resting levels. No children with sickle hemoglobin C disease, but approximately 50% of children with sickle cell anemia showed mild or moderate oxygen desaturation at rest, which was independently associated with the percentage of reticulocytes. Exercise-induced hemoglobin oxygen desaturation was observed in 18% of children with sickle hemoglobin C disease and 34% of children with sickle cell anemia, and was independently associated with the six-minute walk test, acute chest syndrome rate and the strength of red blood cell aggregates in children with sickle cell anemia. No association was found in children with sickle hemoglobin C disease between exercise-induced hemoglobin oxygen desaturation and the measured parameters. Hemoglobin oxygen desaturation at rest was common in children with sickle cell anemia but not in children with sickle hemoglobin C disease, and was mainly associated with greater hemolysis. Physiological strain during exercise and red blood cell aggregation properties may predict the occurrence of exercise-induced hemoglobin oxygen desaturation in children with sickle cell anemia.
ISSN: 0390-6078

inserm-00838989
http://www.hal.inserm.fr/inserm-00838989
http://www.hal.inserm.fr/inserm-00838989/document
http://www.hal.inserm.fr/inserm-00838989/file/Waltz_et_al._Ferrata_Storti_Foundation.pdf
DOI : 10.3324/haematol.2013.083576

Éditeur(s) : HAL CCSD Elsevier
Résumé : In this study, I examine the strain modes of the forearc, arc and back-arc domains in arc-continent collisional settings leading to arc material subduction, delamination and/or accretion. The study focusses on two well-documented colliding island arcs: the Izu–Bonin–Mariana (IBM) arc in Japan and the Luzon arc in Taiwan, both carried by the Philippine Sea plate. Firstly, there is a body of evidence that both the IBM and the Luzon arcs were built on the same Late Jurassic to Early Cretaceous “proto-Philippine Sea Plate” crust. Their internal structure is thus more heterogeneous than expected from Paleogene or Neogene supposedly “intra-oceanic” island arcs. Secondly, those arc systems and proximal “back-arcs” have similar seismic characteristics attesting either for the presence of a middle crust with continental velocities and/or serpentinized uppermost mantle that facilitate crustal shortening/slivering and subsequent decoupling from the rest of the subducting plate. It is shown that the proximal back-arc domain (called “rear-arc” in case of paleoarc activity), overlying the mantle wedge and the subducting slab, may lose its strength if slab-derived hydration occur. Decoupling then occurs below the Moho. Arc delamination likely occurs in mid-crustal levels because middle-crust, heated by nearby magmatism, becomes weak. Accretion of arc material onto the upper plate depends on the characteristics of the arc itself and the geodynamic configuration. Most of the accreted material is probably underplated rather than frontally accreted.
ISSN: 0743-9547

hal-01243080
https://hal.archives-ouvertes.fr/hal-01243080
DOI : 10.1016/j.jseaes.2013.07.043

Éditeur(s) : Société Nationale de Protection de la Nature
Résumé : Monitoring of French Polynesia coral reefs and their recent development.-French Polynesia, consisting of 118 islands in the centre of the Pacific Ocean, has more than 15 000 km(2) of reefs and lagoons managed by the local government. Tourism and pearl culture are the two main economic resources of the country. Polynesian coral reefs are extremely diverse and are among those for which we have thorough knowledge. The exploitation of local resources has been recorded for multiple decades and includes : coral materials, fishing, harvest and export of mother-of-pearl molluscs, pearl production, and ornamental fish. All over the country, many monitoring programmes have been launched to measure the health of reefs and the natural and anthropogenic perturbations that they suffer : hurricanes and seismic events, water quality, health of benthic and fish communities, pearl oyster pathology and radiobiology. These data, collected over the last few decades, allowed to define the relative importance of natural and anthropogenic degradation on reefs and lagoons, and to explain the present status of reefs at different spatial scales. Devastating hurricanes are rare (1903-1906, 1982-1983 and occasionally at other times), but they may annihilate outer slope coral communities on some islands. Bleaching events with considerable coral mortality at different geographical scales occurred mainly in 1991, 1994 and 2003. Outbreaks of Acanthaster destroyed numerous reefs (lagoons and outer slopes) from 1978-1982 and a new demographic wave began in 2006 at many Society islands. Eutrophication events only occurred occasionally and only in some lagoons. Whereas natural catastrophic events degrade the coral reef ecosystem across many islands, at the archipelago or even regional scale, anthropogenic degradation is limited to a few Society Islands, occurring rarely on atolls and not at all on those (one third) which are uninhabited. The main causes of reef degradation in some areas of Tahiti and Moorea include the embankment of fringing zones, coral mining, overfishing, absence of urban sewage treatment and the development of leisure and tourism activities. Because of its large geographical extent, one may conclude that major reef degradation in French Polynesia is caused by catastrophic natural events. On the other hand, anthropogenic degradation is more localized. Unfortunately, the synergistic effects of these causes of degradation prevent reefs from recovering. Optimum coral cover on French Polynesian outer reef slopes is between 50-60%. After a major destructive impact (hurricane, bleaching, Acanthaster) a reef is reduced to less than 10% coral cover, however if no more major disturbance events occur a reef will recover in about 12 years. Most of the 15 000 km(2) of reefs and lagoons in French Polynesia are in good health, and along with their neighbouring reefs in East and Central Pacific they are considered as the least degraded reefs worldwide and at a low risk of becoming degraded in the few next decades. However, we are more and more anxious about the future of reefs in the world particularly because present simulations predict that major impacts of climate change would include : elevation of sea surface temperatures, increase in the strength of hurricanes and acidification of seawater which will affect the formation of coral structures.
La Polynésie française, 118 îles au coeur du Pacifique, possède une surface de plus de 15 000 km2 de récifs et lagons gérés par le gouvernement polynésien. Le tourisme et la perliculture représentent les deux ressources économiques majeures du Pays. Les formations récifales très diversifiées sont parmi les mieux connues. Plusieurs suivis d'exploitation des ressources sont opérationnels depuis des décennies : granulats coralliens, pêche pour l'alimentation, collecte et exportation de mollusques nacriers, production de perles, poissons d'ornement. À l'échelle du Pays de très nombreux programmes de surveillance de l'état des récifs et des perturbations qu'ils subissent, naturelles et anthropiques, ont été mis en place : perturbations cycloniques et sismiques, qualité des eaux, état de santé des peuplements benthiques et ichtyologiques, pathologie des nacres, radiobiologie. Toutes ces données recueillies au fi l des décennies ont permis d'établir l'importance relative des dégradations naturelles et anthropiques sur les récifs et lagons polynésiens et d'expliquer leur état de santé actuel en considérant différentes échelles spatiales. Les périodes cycloniques dévastatrices pour les récifs sont rares (1903-1906, 1982-1983 et épisodiquement) mais les cyclones ont parfois anéanti les communautés coralliennes de pentes externes dans certaines îles. Les blanchissements suivis de mortalités importantes à des échelles spatiales diverses, ont été surtout ceux de 1991, 1994 et 2003. Les explosions démographiques d'Acanthaster ont détruit de nombreux récifs (lagons et pentes externes) en 1978-1982 et une nouvelle pullulation s'amplifie depuis 2006 dans plusieurs îles de la Société. Les crises dystrophiques n'ont perturbé qu'épisodiquement certains lagons. [...]
Revue d'Ecologie de la Terre et de la Vie (0249-7395) (Société Nationale de Protection de la Nature), 2008 , Vol. 63 , N. 1-2 , P. 145-177

Droits : 2008 Société Nationale de Protection de la Nature
http://archimer.ifremer.fr/doc/2008/publication-4558.pdf
http://archimer.ifremer.fr/doc/00000/4558/

Éditeur(s) : HAL CCSD European Geosciences Union
Résumé : This study presents a unique database of 172 plagioclase Crystallographic Preferred Orientations (CPO) of variously deformed gabbroic rocks. The CPO characteristics as a function of the deformation regime (magmatic or crystal-plastic) are outlined and discussed. The studied samples are dominantly from slow- and fast-spread present-day ocean crust, as well as from the Oman ophiolite. Plagioclase is the dominant mineral phase in the studied samples. Plagioclase CPOs are grouped into three main categories: Axial-B, a strong point alignment of (010) with a girdle distribution of [100]; Axial-A, a strong point maximum concentration of [100] with parallel girdle distributions of (010) and (001); and P-type, point maxima of [100], (010), and (001). A majority of CPO patterns are Axial-B and P-type, in samples showing either magmatic or crystal-plastic deformation textures. Axial-A CPOs are less common; they represent 21% of the samples deformed by crystal-plastic flow. Although fabric strength (ODF J index) does not show any consistent variation as a function of the CPO patterns, there is a significant difference in the relationship between the ODF and pole figures J indices; the magmatic type microstructures have high (010) pole figures J indices, which increase linearly with ODF J index, whereas the high [100] pole figures J indices of plastically deformed samples vary in a more scattered manner with ODF J index. The multistage nature of plastic deformation superposed on a magmatic structure compared with magmatic flow, and the large number of possible slip-systems in plagioclase probably account for these differences. Calculated seismic properties (P wave and S wave velocities and anisotropies) of plagioclase aggregates show that anisotropy (up to 12% for P wave and 14% for S wave) tends to increase as a function of ODF J index. In comparison with the olivine 1998 CPO database, the magnitude of P wave anisotropy for a given J index is much less than olivine, whereas it is similar for S wave anisotropy. Despite a large variation of fabric patterns and geodynamic setting, seismic properties of plagioclase-rich rocks have similar magnitudes of anisotropy. There is a small difference in the aggregate elastic symmetry, with magmatic microstructures having higher orthorhombic and hexagonal components, whereas plastic deformation microstructures have a slightly higher monoclinic component, possibly correlated with predominant monoclinic simple shear flow in plastically deformed samples. Overall, plots for CPO strength (ODF J index), pole figure strength, CPO symmetry and seismic anisotropy show significant scattering. This could be related to sampling statistics, although our database is a factor of ten higher than the olivine database of 1998, or it could be related to the low symmetry (triclinic) structure of plagioclase resulting in the addition of degrees of freedom in the processes creating the CPOs.
ISSN: 1869-9510

hal-00963439
https://hal.archives-ouvertes.fr/hal-00963439
DOI : 10.5194/se-4-511-2013

Éditeur(s) : Elsevier
Résumé : The ecological quality status (EcoQ) of intertidal mudflats constrained by Pacific oyster farming was assessed by single (H', AMBI, BENTIX and BOPA) and multimetric (M-AMBI and average score) index approaches in the Pertuis Charentais (SW France). Fifteen sampling stations were monitored seasonally for sedimentological features and macrozoobenthos in 2004. Sediments affected by oyster biodeposits showed organic matter enrichment, and sediments from off-bottom culture sites had higher organic matter contents and lower redox potentials than sediments from on-bottom culture sites. Biotic indices consistently registered responses of macrozoobenthos to organic enrichment but there was only partial agreement between single index-derived EcoQs. The average score was better than M-AMBI and single indices for determining EcoQs. Accordingly, oyster farming alters intertidal macrozoobenthic assemblages moderately, and off-bottom cultures cause more disturbance than on-bottom cultures. Hydrodynamics and seasons may interact with culture practices in smothering/strengthening biodeposition-mediated effects through dispersal/accumulation of biodeposits.
Marine Pollution Bulletin (0025-326X) (Elsevier), 2008-11 , Vol. 56 , N. 11 , P. 1898-1912

Droits : 2008 Elsevier Ltd All rights reserved.
http://archimer.ifremer.fr/doc/2008/publication-4650.pdf
DOI:10.1016/j.marpolbul.2008.07.010
http://archimer.ifremer.fr/doc/00000/4650/

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
This is the first of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high-void ratio is constructed and then sheared in a simple shear numerical device at different confinement levels. We study the macroscopic response of the material in terms of mean and deviatoric stresses and strains. We show that the introduction of a local force scale, i.e., the tensile strength of the cemented bonds, causes the material to behave in a rigid-plastic fashion, so that a yield surface can be easily determined. This yield surface has a concave-down shape in the mean: deviatoric stress plane and it approaches a straight line, i.e., a Coulomb strength envelope, in the limit of a very dense granular material. Beyond yielding, the cemented structure gradually degrades until the material eventually behaves as a cohesionless granular material. Strain localization is also investigated, showing that the strains concentrate in a shear band whose thickness increases with the confining stress. The void ratio inside the shear band at the steady state is shown to be a material property that depends only on contact parameters.
ISSN: 1539-3755

hal-00523453
https://hal.archives-ouvertes.fr/hal-00523453
DOI : 10.1103/PhysRevE.82.011303

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Phyllosilicate content and related permeability of fault zones form primary controls on hydraulic and mechanical behavior of the brittle crust. Hence, understanding and predicting the localization of these ubiquitous minerals is a major issue for fundamental and applied geosciences. We describe normal fault zones cutting a foreland arkosic turbiditic formation suffering high-T diagenesis and formed under conditions (~200°C) typical of deeply buried reservoirs and common within the seismogenic interval. Microstructural analyses show a large proportion of phyllosilicates (up to 34%) in the fault rock, derived from near-complete feldspar alteration and disaggregation during deformation. This study shows that even faults with offsets (~20 cm) much lower than bed thickness can have such large feldspar-to-phyllosilicate transformation ratios, implying that the origin of the phyllosilicates is purely transformation related. These results imply that the potential sealing capacity and strength of faults could be predicted from the host rock feldspar content. Where sealing capacity and fault strength can be related to phyllosilicate content, these properties can then also be inferred from the predicted phyllosilicate content: this opens up new horizons concerning the hydraulic and the mechanical behavior of the upper crust.
ISSN: 0094-8276

hal-00903574
https://hal.archives-ouvertes.fr/hal-00903574
DOI : 10.1002/grl.50829

Éditeur(s) : HAL CCSD Elsevier
Résumé : Spinel peridotite xenoliths from Persani Mountains, Southeastern Carpathians, Romania, were submitted to deformation by dislocation creep accompanied by dynamic recrystallization under variable stress and temperature conditions. Predominance of low-angle boundaries parallel to (100) with well-defined [Ovw] rotation axes in olivine indicates that subgrain rotation is the main recrystallization mechanism and that dislocation glide occurs mainly in [100]{0k1} systems. Analysis of olivine crystal preferred orientations highlights that recrystallization results in dispersion of the orientations of recrystallized grains relatively to the parent grains. This dispersion may be quantified by a dimension-less dispersion factor defined as the ratio of the random component of the [100] axis distributions between the recrystallized grains and porphyroclasts. This factor is largely independent from the overall fabric strength, the number of grains analyzed, and the recrystallized grain size. The olivine CPO strength and anisotropy at the rock scale, quantified by J-index, are largely controlled by the volume of recrystallized grains, which depends on finite strain. Comparison of olivine CPO in coarse- and fine-grained porphyroclastic peridotites shows that deviatoric stress and temperature conditions play nevertheless a role on the CPO evolution during recrystallization; selective grain growth, which is favored at high temperature and low stresses, does counteract the dispersion produced by the nucleation processes.
ISSN: 0191-8141

hal-00669963
https://hal.archives-ouvertes.fr/hal-00669963
DOI : 10.1016/j.jsg.2011.09.010

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
We present the results of dynamic modeling of the western Mediterranean that accounts for observed global positioning system (GPS) surface deformation of the Alboran Sea and surrounding Rif and Betic Mountains as the result of the combined effects of relative motion of the Eurasian and Nubian plates, low strength in the Alboran Sea region and sub-lithospheric processes occurring beneath the External Rif domain. Assuming that the lithosphere behaves elastically over the short time period of the GPS observations, an elastic plate model is considered in our study, including an area of weak lithosphere (factor of 10) centered on the Alboran Sea and in which lateral boundary conditions consist of the Nubia-Eurasia oblique convergence. Sub-crustal processes are modeled by application of a horizontal traction on a small area (patch) at the base of the elastic plate. Our modeling studies demonstrate the need for sub-crustal or sub-lithospheric, southwestward-directed forcing to account for observed southwestward motion of the Rif and Betic domains. Based on the location, orientation, and small area of the traction patch, we hypothesize that forcing is associated with delamination and rollback of the subducted African continental lithospheric mantle beneath the External Rif zone, due to the pull of the oceanic part of the Western Mediterranean slab, a dynamic process that may be similar to that where the over-riding plate is driven toward the subduction zone during slab rollback.
ISSN: 0091-7613

hal-00524546
https://hal.archives-ouvertes.fr/hal-00524546
DOI : 10.1130/G30963.1

Éditeur(s) : Elsevier Science Inc
Résumé : The sex-determining system of Crassostrea gigas is still poorly known, especially regarding the potential influence of temperature. In order to address this question, mRNA expressions of actors of the molecular cascade (Cg-DMI, Cg-SoxE, Cg-beta-catenin, Cg-Foxl2/Cg-FoxI2os) and of Oyvlg, a germ cell marker, were investigated by real-time PCR in spat grown at different temperatures (18, 22, 25 and 28 degrees C). In parallel, gonadic differentiation, gametogenesis and sex ratios were assessed by histology at each of these temperatures. Whatever the temperature, Cg-DMI, Cg-SoxE, Cg-beta-catenin and Oyvlg expressions peaked at the same developmental stage, always after Cg-Foxl2/Cg-Foxl2os (around 40-44 dpf for spat grown at 18 degrees C). Temperatures increased the kinetics of first gonadic differentiation and gametogenesis. At 25 degrees C a significant switch occurred in sex ratio towards males and in the balance of expression between male and female genes, in favor of males. A slight gametogenesis disturbance was also observed. These results strengthen the hypotheses about the sex-determining time window and molecular cascade governing the development of C gigas, with notably the involvement of Cg-Foxl2/Cg-Foxl2os in the very early steps. They also suggest an influence of temperature on the oyster's sex determination which, associated to genetic control, would induce a mixed sex determination system (GSD +TSD). (C) 2013 Elsevier Inc. All rights reserved.
Comparative Biochemistry And Physiology A-molecular & Integrative Physiology (1095-6433) (Elsevier Science Inc), 2013-05 , Vol. 165 , N. 1 , P. 61-69

Droits : 2013 Elsevier Inc. All rights reserved
http://archimer.ifremer.fr/doc/00136/24767/22874.pdf
DOI:10.1016/j.cbpa.2013.02.007
http://archimer.ifremer.fr/doc/00136/24767/

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
This study aims to assess the evidence on adverse pregnancy outcome associated with living close to polluted industrial sites, and identify the strengths and weaknesses of published epidemiological studies. A systematic literature search has been performed on all epidemiological studies published in developed countries since 1990, on the association between residential proximity to industrial sites (hazardous waste sites, industrial facilities and landfill sites) and adverse pregnancy outcome (low birth weight, preterm birth, small for gestational age, intrauterine growth retardation, infant mortality, congenital malformation). Based on 41 papers, our review reveals an excess risk of reproductive morbidity. However, no studies show significant excess risk of mortality including fetal death, neonatal or infant mortality and stillbirth. All published studies tend to show an increased risk of congenital abnormalities, yet not all are statistically significant. All but two of these studies revealed an excess risk of low birth weight. Results for preterm birth, small for gestational age and intrauterine growth retardation show the same pattern. There is suggestive evidence from the post-1990 literature that residential proximity to polluted sites (including landfills, hazardous waste sites and industrial facilities) might contribute to adverse reproductive outcomes, especially congenital malformations and low birth weight—though not mortality. This body of evidence has limitations that impede the formulation of firm conclusions, and new, well-focused studies are called for. The review findings suggest that continued strengthening of rules governing industrial emissions as well as industrial waste management and improved land use planning are needed.
ISSN: 1476-072X

Droits : http://creativecommons.org/licenses/by/
hal-01547817
http://hal.upmc.fr/hal-01547817
http://hal.upmc.fr/hal-01547817/document
http://hal.upmc.fr/hal-01547817/file/s12942-017-0091-y.pdf
DOI : 10.1186/s12942-017-0091-y

Éditeur(s) : HAL CCSD
Résumé : Composite materials incorporating vegetable fibres have known an increasingly interest during the past few decades. These environmental friendly materials are low-cost and offer advantages such as reduction of electrical consumption by air conditioning. Moreover, the use of vegetable fibres in replacement of synthetic fibre is interesting in developing countries where the availability of tropical plants and agricultural waste is important. This paper presents an initial investigation on the use of a construction material, composed of cement and pre-treated (heat or alkaline treatments) sugar cane bagasse fibres. The purpose of this study is to analyse the effect of fibre content and treatment on thermal conductivity, specific heat, flexural strength and density. The addition of retified fibres reduces composites thermal conductivity and yields a weaker specific heat in comparison with composites made with alkaline fibres. From mechanical point of view, composites made with alkaline fibres have a better flexural strength than others.
12th International Inorganic-bonded Fiber Composites Conference
Aalborg, Denmark

hal-00807543
https://hal.univ-antilles.fr/hal-00807543

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Although subducting slabs undergo a bending deformation that resists tectonic plate motions, the magnitude of this resistance is not known because of poor constraints on slab strength. However, because slab bending slows the relatively rapid motions of oceanic plates, observed plate motions constrain the importance of bending. We estimated the slab pull force and the bending resistance globally for 207 subduction zone transects using new measurements of the bending curvature determined from slab seismicity. Predicting plate motions Using a global mantle flow model, we constrain the viscosity of the bending slab to be at most similar to 300 times more viscous than the upper mantle: stronger slabs are intolerably slowed by the bending deformation. Weaker slabs, however, cannot transmit a pull force sufficient to explain rapid trenchward plate motions unless slabs stretch faster than seismically observed rates of similar to 10(-15) s(-1). The constrained bending viscosity (similar to 2 x 10(23) Pa s) is larger than previous estimates that yielded similar or larger bending resistance (here similar to 25% of forces). This apparent discrepancy occurs because slabs bend more gently than previously thought, with an average radius of curvature of 390 km that permits subduction Of Strong slabs. This gentle bending may ultimately permit plate tectonics on Earth.
ISSN: 0012-821X

hal-00412383
https://hal.archives-ouvertes.fr/hal-00412383
DOI : 10.1016/j.epsl.2008.05.009

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The initiation and subsequent evolution of intra-plate orogens, resulting from continental plate interior deformation due to transmission of stresses over large distances from the active plate boundaries, is controlled by lateral and vertical strength contrasts in the lithosphere. We present lithospheric-scale analogue models combining 1) lateral strength variations in the continental lithosphere, and 2) different vertical rheological stratifications. The experimental continental lithosphere has a four-layer brittle–ductile rheological stratification. Lateral heterogeneity is implemented in all models by increased crustal strength in a central narrow block. The main investigated parameters are strain rate and strength of the lithospheric mantle, both playing an important role in crust–mantle coupling. The experiments show that the presence of a strong crustal domain is effective in localizing deformation along its boundaries. After deformation is localized, the evolution of the orogenic system is governed by the mechanical properties of the lithosphere such that the final geometry of the intra-plate mountain depends on the interplay between crust–mantle coupling and folding versus fracturing of the lithospheric mantle. Underthrusting is the main deformation mode in case of high convergence velocity and/or thick brittle mantle with a final asymmetric architecture of the deep lithosphere. In contrast, lithospheric folding is dominant in case of low convergence velocity and low strength brittle mantle, leading to the development of a symmetric lithospheric root. The presented analogue modelling results provide novel insights for 1) strain localization and 2) the development of the asymmetric architecture of the Pyrenees.
ISSN: 0012-821X

hal-01243577
https://hal.archives-ouvertes.fr/hal-01243577
DOI : 10.1016/j.epsl.2015.05.022

Éditeur(s) : Elsevier
Résumé : High-resolution reflection and refraction seismic data were collected in 2004 to investigate, in further detail than allowed by pre-existing low resolution seismic data, the nature of a Bottom Simulating Reflector (BSR) that extends over a broad area of the Fairway Basin, a rifted, continental structure located on the eastern flank of the Lord Howe Rise, to the southwest of New Caledonia. Two main reflectors are documented: the shallower (RN) mimics the seafloor and has a negative polarity while the deeper (RP) does not always mimic the seafloor and has a positive polarity. Using the existing regional seismic lines, we can show that reflector RN can be continuously followed up to DSDP 208 drill hole site. Reflector RP is discontinuous and cannot be traced to DSDP 208. Based on DSDP 208 stratigraphic data, Reflector RN is assigned to the Eocene/Oligocene regional unconformity; reflector RP is interpreted in terms of a diagenetic BSR, likely related to an Opal-A/Opal-CT transition front. Heat flow data collected in 2006 suggest that reflector RP lies too deep to be related to methane hydrates, strengthening our interpretation that RP is of diagenetic origin.
Marine Geology (0025-3227) (Elsevier), 2009-10 , Vol. 266 , N. 1-4 , P. 80-90

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-7321.pdf
DOI:10.1016/j.margeo.2009.07.014
http://archimer.ifremer.fr/doc/00000/7321/

Éditeur(s) : HAL CCSD Seismological Society of America
Résumé : International audience
We present an improvement of the maximum intersection (MAXI) method in which absolute earthquake location is defined by the maximum intersection number of hyperbolic equal differential time (EDT) volumes (one EDT volume being described as all grid nodes satisfying the arrival‐time differences between two stations, ± a tolerance value known as TERR). This 3D technique is well adapted to a strongly heterogeneous environment, avoids the depth versus origin‐time trade‐off (even using P arrivals alone), and objectively filters possible erroneous arrival times. Improvements consist of introducing an iterative multiscale approach on the TERR parameter and conducting a hierarchy of grid discretization to refine the preliminary solution (multigrid algorithm). The outlier cleaning process is strengthened by conducting statistical analyses based on the number of EDT volume intersections per station, rather than on travel‐time residues. Processing two series of synthetic arrival times computed in the 3D seismological configuration of the southernmost Ryukyu subduction zone, offshore Taiwan, allows us to (1) confirm MAXI robustness, even when arrival times are highly disturbed or azimuthal coverage largely reduced, and (2) show that MAXI, by limiting trade‐offs between origin time and depth and between epicentral position and depth, is less affected by a wrong velocity model than a technique that minimizes travel‐time residues. To conclude, we apply the MAXI method to locate earthquakes recorded by the combined Central Weather Bureau of Taiwan (CWB) and the Japanese Meteorological Agency (JMA) networks (1991-2008) within a georealistic a priori 3D P‐velocity model. Hypocenter determinations are selected based on MAXI confidence factors, and earthquake clustering along well‐known tectonic features witnesses hypocenter determination accuracy.
ISSN: 0037-1106

hal-00725227
https://hal.archives-ouvertes.fr/hal-00725227
DOI : 10.1785/0120100311