Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In this paper, we describe an outcrop to characterize the effect of fracture spacing and type on larger scale effective elasticity, which is measured for the first time in-situ with a Schmidt hammer. The outcrop is dominated by lime mudstones and belongs to the deformation zone of the St Clement fault, in southern France. Our results suggest that small spacing of faults, open fractures and styolites leads to lesser effective Young's modulus, whereas small sealed fracture spacing leads to greater effective Young's modulus. These relationships are compatible with theoretical models of effective elasticity. Using Amadei and Savage (1993) approach, we define a non-linear model that relates Schmidt hammer rebound to spacing by fracture type. A hemisphere with a radius of 40 to similar to 200 cm is the rheological volume characterized by the Schmidt hammer. Results of model inversion demonstrate that variations of Schmidt hammer rebound over the outcrop can be used to estimate fracture type and stiffness. Stiffness of sealed fractures is 2-3 orders of magnitude greater than the stiffness of faults, stylolites and open fractures. This result is consistent with an increase of the rate of interseismic stress build-up of major faults with sealing of fractures in their damage zone.
ISSN: 0191-8141

hal-00669954
https://hal.archives-ouvertes.fr/hal-00669954
DOI : 10.1016/j.jsg.2011.09.009

Éditeur(s) : Elsevier Science Bv
Résumé : Recent advances in technologies have lead to a vast influx of data on movements, based on discrete recorded position of animals or fishing boats, opening new horizons for future analyses. However, most of the potential interest of tracking data depends on the ability to develop suitable modelling strategies to analyze trajectories from discrete recorded positions. A serious modelling challenge is to infer the evolution of the true position and the associated spatio-temporal distribution of behavioural states using discrete, error-prone and incomplete observations. In this paper, a Bayesian Hierarchical Model (HBM) using Hidden Markov Process (HMP) is proposed as a template for analyzing fishing boats trajectories based on data available from satellite-based vessel monitoring systems (VMS). The analysis seeks to enhance the definition of the fishing pressure exerted on fish stocks, by discriminating between the different behavioural states of a fishing trip, and also by quantifying the relative importance of each of these states during a fishing trip. The HBM approach is tested to analyse the behaviour of pelagic trawlers in the Bay of Biscay. A hidden Markov chain with a regular discrete time step is used to model transitions between successive behavioural states (e.g., fishing, steaming, stopping (at Port or at sea)) of each vessel. The parameters of the movement process (speed and turning angles) are defined conditionally upon the behavioural states. Bayesian methods are used to integrate the available data (typically VMS position recorded at discrete time) and to draw inferences on any unknown parameters of the model. The model is first tested on simulated data with different parameters structures. Results provide insights on the potential of HBM with HMP to analyze VMS data. They show that if VMS positions are recorded synchronously with the instants at which the process switch from one behavioural state to another, the estimation method provides unbiased and precise inferences on behavioural states and on associated movement parameters. However, if the observations are not gathered with a sufficiently high frequency, the performance of the estimation method could be drastically impacted when the discrete observations are not synchronous with the switching instants. The model is then applied to real pathways to estimate variables of interest such as the number of operations per trip, time and distance spent fishing or travelling. (C) 2010 Elsevier B.V. All rights reserved.
Ecological Modelling (0304-3800) (Elsevier Science Bv), 2010-07 , Vol. 221 , N. 15 , P. 1757-1769

Droits : 2010 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/00009/11993/9342.pdf
DOI:10.1016/j.ecolmodel.2010.04.005
http://archimer.ifremer.fr/doc/00009/11993/

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : Terrapub
Résumé : A series of empirical expressions for predicting gas hydrate stability, its volume fraction out of pore space and gas hydrate mass-density were established in different systems in consideration of gas composition (CH4, C2H6, H2S) and salinity (NaCl, seawater), and pore size at temperature between 273.15 and 300 K, based on our gas hydrate thermodynamic model (Sultan et al., 2004b, c). Six of the developed expressions for predicting gas hydrate stability were validated against the available published experimental data and they were also compared with other models. At temperature 273.15 to 290.15 K, the ARDPs (Average Relative Deviation of Pressures between the prediction and the experimental data) have shown that these empirical expressions are in agreement with the experimental data as well as other models, indicating their reliability of predicting gas hydrate stability for these systems. At higher temperatures, the empirical predictions for gas hydrate stability do not well reproduce the experimental data, because they are based on van der Waals model. The empirical expressions for predicting gas hydrate stability in the systems of CH4 + H2S + H2O, CH4 + seawater + poresize, CH4 + H2S + NaCl and CH4 + CO2 + NaCl, and for evaluating gas hydrate fraction and its density need further validation due to lack of available published experimental data. However, the empirical expressions for gas hydrate fraction and its density show that the effects of pore size and salinity are negligible; gas hydrate fraction will increase if methane concentration continuously increases relatively in excess of methane solubility and decreases with pressure within gas hydrate stability zone, which is well consistent with data of natural gas hydrates in Cascadia; gas hydrate density tends to increase with ethane percentage and decrease with pressure.
Geochemical Journal (0016-7002) (Terrapub), 2008-03 , Vol. 42 , N. 2 , P. 163-175

Droits : 2008 TERRAPUB. The Geochemical Society of Japan.
http://archimer.ifremer.fr/doc/2008/publication-4958.pdf
http://archimer.ifremer.fr/doc/00000/4958/

Éditeur(s) : HAL CCSD
Résumé : 27 pages
Cascade Stochastic Differential Equation (SDE), a continuous time model for energy dissipation in turbulence, is a generalization of the Yaglom discrete cascade model. We extend this SDE to a model in random environment by assuming that its two parameters are switched by a continuous time Markov chain whose states represent the states of the environment. Moreover, a Dirichlet process is placed as a prior on the space of sample paths of this chain. We propose a Bayesian estimation method of this model which is tested both on simulated data and on real data of wind speed measured at the entrance of the mangrove ecosystem in Guadeloupe.
https://hal.archives-ouvertes.fr/hal-00286131

hal-00286131
https://hal.archives-ouvertes.fr/hal-00286131
https://hal.archives-ouvertes.fr/hal-00286131/document
https://hal.archives-ouvertes.fr/hal-00286131/file/Srik11_PhysicaDDspace.pdf

Éditeur(s) : HAL CCSD
Résumé : 15 pages
A Stochastic Differential Equation appearing in the statistical theory of turbulence is extended in random environment by assuming that its two parameters are switched by an unobserved continuoustime Markov chain whose states represent the states of the environment. A Dirichlet process is placed as a prior on the space of the sample paths of this chain, leading to a hierarchical Dirichlet model whose estimation is done both on simulated data and on real data of wind speed measured at the entrance of a mangrove ecosystem.
https://hal.archives-ouvertes.fr/hal-00455050

hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050
https://hal.archives-ouvertes.fr/hal-00455050/document
https://hal.archives-ouvertes.fr/hal-00455050/file/CSDA06_Srik_Hal.pdf

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Heterogeneous patterns of malaria transmission are thought to be driven by factors including host genetics, distance to mosquito breeding sites, housing construction, and socio-behavioural characteristics. Evaluation of local transmission epidemiology to characterize malaria risk is essential for planning malaria control and elimination programmes. The use of geographical information systems (GIS) techniques has been a major asset to this approach. To assess time and space distribution of malaria disease in Bandiagara, Mali, within a transmission season, data were used from an ongoing malaria incidence study that enrolled 300 participants aged under six years old ". Methods: Children's households were georeferenced using a handheld global position system. Clinical malaria was defined as a positive blood slide for Plasmodium falciparum asexual stages associated with at least one of the following signs: headache, body aches, fever, chills and weakness. Daily rainfall was measured at the local weather station. Landscape features of Bandiagara were obtained from satellite images and field survey. QGIS™ software was used to map malaria cases, affected and non-affected children, and the number of malaria episodes per child in each block of Bandiagara. Clusters of high or low risk were identified under SaTScan W software according to a Bernoulli model. Results: From June 2009 to May 2010, 296 clinical malaria cases were recorded. Though clearly temporally related to the rains, Plasmodium falciparum occurrence persisted late in the dry season. Two " hot spots " of malaria transmission also found, notably along the Yamé River, characterized by higher than expected numbers of malaria cases, and high numbers of clinical episodes per child. Conversely, the northeastern sector of the town had fewer cases despite its proximity to a large body of standing water which was mosquito habitat. Conclusion: These results confirm the existence of a marked spatial heterogeneity of malaria transmission in Bandiagara, providing support for implementation of targeted interventions. Background Malaria is one of the leading causes of morbidity and mortality in the world, with an estimated 3.3 billion people at risk of malaria [1]. The incidence of malaria worldwide is estimated to be 216 million cases per year, with 81% of these cases occurring in sub-Saharan Africa. Malaria kills approximately 655,000 people per year; 91% of deaths occur in sub-Saharan Africa [1], mostly in children under five years of age. In Mali, West Africa, malaria represents 36.5% of consultation motives in health center, it is a leading cause of morbidity and mortality children of less than five years of age and the first reason of anaemia in pregnant women [2]. Malaria transmission is seasonal. Malaria parasite transmission and clinical disease are characterized by important microgeographic variation, often between adjacent villages, households or families [3-8]. This local heterogeneity is driven by a variety of factors including human genetics [9,10], distance to potential breeding sites [11,12], housing construction
ISSN: 1475-2875

hal-01307672
https://hal-amu.archives-ouvertes.fr/hal-01307672
https://hal-amu.archives-ouvertes.fr/hal-01307672/document
https://hal-amu.archives-ouvertes.fr/hal-01307672/file/1475-2875-12-82.pdf
DOI : 10.1186/1476-072X-2-5

Éditeur(s) : HAL CCSD Institute of Electrical and Electronics Engineers
Résumé : International audience
The state-space modeling of partially observed dynamical systems generally requires estimates of unknown parameters. The dynamic state vector together with the static parameter vector can be considered as an augmented state vector. Classical filtering methods, such as the extended Kalman filter (EKF) and the bootstrap particle filter (PF), fail to estimate the augmented state vector. For these classical filters to handle the augmented state vector, a dynamic noise term should be artificially added to the parameter components or to the deterministic component of the dynamical system. However, this approach degrades the estimation performance of the filters. We propose a variant of the PF based on convolution kernel approximation techniques. This approach is tested on a simulated case study.
ISSN: 0018-9251

inria-00459886
https://hal.inria.fr/inria-00459886
DOI : 10.1109/TAES.2009.5259183

Éditeur(s) : HAL CCSD
Résumé : The purpose of this thesis is to improve the knowledge about and apply data mining techniques and some Bayesian model in the field of social and environmental health inequalities. On the neighborhood scale on the Paris, Marseille, Lyon and Lille metropolitan areas, the health event studied is infant mortality. We try to explain its risk with socio-economic data retrieved from the national census and environmental exposures such as air pollution, noise, proximity to traffic, green spaces and industries. The thesis is composed of two parts. The data mining part details the development of a procedure of creation of multidimensional socio-economic indices and of an R package that implements it, followed by the creation of a cumulative exposure index. In this part, data mining techniques are used to synthesize information and provide composite indicators amenable for direct usage by stakeholders or in the framework of epidemiological studies. The second part is about Bayesian models. It explains the "BYM" model. This model allows to take into account the spatial dimension of the data when estimating mortality risks. In both cases, the methods are exposed and several results of their usage in the above-mentioned context are presented. We also show the value of the socio-economic index procedure, as well as the existence of social inequalities of infant mortality in the studied metropolitan areas.
Cette thèse a pour but d'améliorer les connaissances concernant les techniques d'analyse de données et certains modèles bayésiens dans le domaine de l'étude des inégalités sociales et environnementales de santé. À l'échelle géographique de l'IRIS sur les agglomérations de Paris, Marseille, Lyon et Lille, l'événement sanitaire étudié est la mortalité infantile dont on cherchera à expliquer le risque avec des données socio-économiques issues du recensement et des expositions environnementales comme la pollution de l'air, les niveaux de bruit et la proximité aux industries polluantes, au trafic automobile ou aux espaces verts. Deux volets principaux composent cette thèse. Le volet analyse de données détaille la mise au point d'une procédure de création d'indices socio-économiques multidimensionnels et la conception d'un package R l'implémentant, puis la création d'un indice de multi-expositions environnementales. Pour cela, on utilise des techniques d'analyse de données pour synthétiser l'information et fournir des indicateurs composites utilisables directement par les décideurs publics ou dans le cadre d'études épidémiologiques. Le second volet concerne les modèles bayésiens et explique le modèle " BYM ". Celui-ci permet de prendre en compte les aspects spatiaux des données et est mis en œuvre pour estimer le risque de mortalité infantile. Dans les deux cas, les méthodes sont présentées et différents résultats de leur utilisation dans le contexte ci-dessus exposés. On montre notamment l'intérêt de la procédure de création d'indices socio-économiques et de multi-expositions, ainsi que l'existence d'inégalités sociales de mortalité infantile dans les agglomérations étudiées.
https://tel.archives-ouvertes.fr/tel-00943004

tel-00943004
https://tel.archives-ouvertes.fr/tel-00943004
https://tel.archives-ouvertes.fr/tel-00943004/document
https://tel.archives-ouvertes.fr/tel-00943004/file/Manuscrit_LallouA_final.pdf

Éditeur(s) : HAL CCSD Nature Publishing Group
Résumé : International audience
Everyone is subject to environmental exposures from various sources, with negative health impacts (air, water and soil contamination, noise, etc.or with positive effects (e.g. green space). Studies considering such complex environmental settings in a global manner are rare. We propose to use statistical factor and cluster analyses to create a composite exposure index with a data-driven approach, in view to assess the environmental burden experienced by populations. We illustrate this approach in a large French metropolitan area. The study was carried out in the Great Lyon area (France, 1.2 M inhabitants) at the census Block Group (BG) scale. We used as environmental indicators ambient air NO2 annual concentrations, noise levels and proximity to green spaces, to industrial plants, to polluted sites and to road traffic. They were synthesized using Multiple Factor Analysis (MFA), a data-driven technique without a priori modeling, followed by a Hierarchical Clustering to create BG classes. The first components of the MFA explained, respectively, 30, 14, 11 and 9% of the total variance. Clustering in five classes group: (1) a particular type of large BGs without population; (2) BGs of green residential areas, with less negative exposures than average; (3) BGs of residential areas near midtown; (4) BGs close to industries; and (5) midtown urban BGs, with higher negative exposures than average and less green spaces. Other numbers of classes were tested in order to assess a variety of clustering. We present an approach using statistical factor and cluster analyses techniques, which seem overlooked to assess cumulative exposure in complex environmental settings. Although it cannot be applied directly for risk or health effect assessment, the resulting index can help to identify hot spots of cumulative exposure, to prioritize urban policies or to compare the environmental burden across study areas in an epidemiological framework.Journal of Exposure Science and Environmental Epidemiology advance online publication, 24 September 2014; doi:10.1038/jes.2014.66.
ISSN: 1559-0631

hal-01069587
https://hal.archives-ouvertes.fr/hal-01069587
https://hal.archives-ouvertes.fr/hal-01069587/document
https://hal.archives-ouvertes.fr/hal-01069587/file/Article_multiexpo_20140708_c.pdf
DOI : 10.1038/jes.2014.66

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We propose a new geometric approach to describe the qualitative dynamics of chemical reactions networks. By this method we identify metastable regimes, defined as low dimensional regions of the phase space close to which the dynamics is much slower compared to the rest of the phase space. These metastable regimes depend on the network topology and on the orders of magnitude of the kinetic parameters. Benchmarking of the method on a computational biology model repository suggests that the number of metastable regimes is sub-exponential in the number of variables and equations. The dynamics of the network can be described as a sequence of jumps from one metastable regime to another. We show that a geometrically computed con-nectivity graph restricts the set of possible jumps. We also provide finite state machine (Markov chain) models for such dynamic changes. Applied to signal transduction models, our approach unravels dynamical and functional * corresponding author capacities of signalling pathways, as well as parameters responsible for speci-ficity of the pathway response. In particular, for a model of TGFβ signalling, we find that the ratio of TGFBR2 to TGFBR1 receptors concentrations can be used to discriminate between metastable regimes. Using expression data from the NCI60 panel of human tumor cell lines, we show that aggressive and non-aggressive tumour cell lines function in different metastable regimes and can be distinguished by measuring the relative concentrations of receptors of the two types.
ISSN: 0303-2647

hal-01379033
https://hal.inria.fr/hal-01379033
https://hal.inria.fr/hal-01379033/document
https://hal.inria.fr/hal-01379033/file/Samal_et_al_Biosystems_final.pdf
DOI : 10.1016/j.biosystems.2016.07.004

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : This paper presents an inversion method using the interseismic velocity field to determine effective rigidity of the lithosphere. The method is based on the minimization of a cost function defined as the quadratic measure of the difference between measured and modelled velocity fields on a discrete set of points. The continuous mapping of the rigidity is fulfilled with a limited set of parameters and the forward solution is achieved using a plane stress finite element code. The computation of the cost function gradient in the parameters' space allows one to iteratively find the best parameters set through a suitable optimization algorithm.;We first design a benchmark including an abrupt rigidity variation that cannot be described by a continuous function. For such a case, we show that increasing the number of parameters is a way to accurately describe sharp variations of the rigidity map. Then, we use a dense GPS velocity field over the southwestern United States to estimate the corresponding rigidity variations for different spatial resolutions of the parameters' grid. We analyse the conceptual and practical difficulties associated with our methodology. Finally, rigidity maps obtained by our inversion method in southwestern United States and particularly across the San Andreas Fault System are reviewed and compared to current plate rigidity estimates and geophysical data over this area.
ISSN: 0956-540X

hal-00669897
https://hal.archives-ouvertes.fr/hal-00669897
DOI : 10.1111/j.1365-246X.2011.05192.x

Éditeur(s) : Université des Antilles Études caribéennes
Résumé : En développant, à partir de 1984, un Centre touristique Intégralement Planifié dans une localité de la côte Pacifique de l’état d’Oaxaca, l’État mexicain entendait impulser un développement économique dans une région périphérique et pauvre du pays. Basé sur l’expropriation d’une portion du territoire communal, le processus engendre un certain nombre de résistances au sein des communautés locales. Le centre touristique est aujourd’hui un espace fragmenté, reflet et conséquence des inégalités sociales et des conflits sociaux. Depuis une perspective de géographie sociale, cet article cherche à mettre en lumière les conflits et compromis sociaux qui traversent la société locale. L’appropriation de l’espace, les luttes de pouvoir et les stratégies développées par les différents acteurs seront les entrées privilégiées pour interroger un modèle de planification, « par le haut », ignorant trop souvent les réalités sociales à l’échelle locale.
Since 1984, the Mexican government has tried to stimulate the economy in a poor and peripheral area of the country. They aimed to do so by developing an Integrally Planed Resort (CIP, in Spanish) in a community, located in the Oaxaca state on the Pacific coast. Being based on the expropriation of some parts of the communal territory, this process created some remittances among the local communities. Today, this resort is still a fragmented space and reflects social inequalities and social conflicts. From a social geographical perspective, this article aims to show the social conflicts and social compromises among the local society. Space appropriation, power battles and strategies developed by the different actors, will be the main tools to investigate this planning model. In this model, the government too often has ignored social realities on the local scale.
Al crear, a partir de 1984, un Centro turístico Integralmente Planeado en un poblado de la costa del estado de Oaxaca, el gobierno mexicano pretendió impulsar el desarrollo económico de una región periférica y marginada del país. Basado en la expropiación de una parte del territorio municipal, dicho proceso genera resistencias entre las comunidades locales. Hoy en día, el centro turístico es un espacio fragmentado, reflejo y consecuencia de las desigualdades sociales y conflictos. Desde una perspectiva de geografía social, el presente artículo buscará destacar los conflictos y compromisos sociales que atraviesan la sociedad local. La apropiación del espacio, las luchas de poder y las estrategias desarrolladas por los diferentes actores serán los enfoques privilegiados para cuestionar un modelo de planeación “vertical”, que suele ignorar las realidades sociales a nivel local.
Mexique

Droits : info:eu-repo/semantics/openAccess
urn:doi:10.4000/etudescaribeennes.4069
http://journals.openedition.org/etudescaribeennes/4069

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Ocean loading effects cause 3-D displacements large enough to affect space geodesy measurements either at the subdiurnal periods or at longer time scales by the means of spurious signals. GPS measurements, in turn, could provide local improvements of the models in coastal areas if their ability to precisely monitor such rapid displacements is assessed. In this paper, we use 105 days of continuous GPS measurements collected in 2004 in the French Brittany and Cotentin region to investigate: (1) the precision achieved by the GPS analysis on measuring 3-D subdiurnal displacements and amplitude and phase of the tidal constituents, (2) the quality of the most recent ocean tide model FES2004 in such a complex coastal context. Indeed, in this area, tide amplitudes are among the largest in the world (up to 16 cm of loading displacements on the vertical component) and are believed to show strong shallow-water tides. From a state of the art GPS analysis using the scientific GAMIT software over 2-h sessions, we test two independent strategies for the realization of the reference frame. The position time series are then compared with the displacements predicted by the FES2004 model applied on an elastic Earth model. The two sets of results are consistent with each other at the same level of agreement than with the predicted displacements, namely 3–5 mm on the horizontal components, 10 mm on the vertical. This assesses the capability of this technique for measuring 3-D ocean tide loading deformation. We validate the FES2004 model in the Brittany area, even though it slightly (2–7 mm) underestimates the three components amplitudes. With a harmonic analysis of the observed position time series, we obtain nevertheless an agreement at a submillimetre level for the M2, N2, O1, Q1 tidal constituents and at a millimetre level for the K1 and S2 tidal constituents. Moreover, we can extract a significant M4 load signal at the 95 per cent confidence level from the GPS time series at the stations located in the Mont St Michel area. The detection of other shallow-water constituents would be helpful to understand the amplitude deficit between the FES2004 predicted and GPS observed displacements.
ISSN: 0956-540X

insu-00335909
https://hal-insu.archives-ouvertes.fr/insu-00335909
https://hal-insu.archives-ouvertes.fr/insu-00335909/document
https://hal-insu.archives-ouvertes.fr/insu-00335909/file/Vergnolle_GJI_08_revised.pdf
DOI : 10.1111/j.1365-246X.2008.03734.x

Éditeur(s) : Ecole Nationale Supérieure Agronomique de Rennes (ENSAR)
Résumé : Artificial Fish Aggregating Devices (FADs) are known to concentrate tropical tunas. This aggregative behaviour drastically increases the vulnerability of these species to fishing. Alternatively, FADs can be used as oceanic observatories to study the aggregative behaviour of large pelagic fish. We conducted sea surveys in Martinique (Lesser Antilles) to i) establish a typology of the pelagic fish aggregations found around moored FADs ii) study their relations with their biotic and abiotic environment and the local fishery. The mean biomass of large pelagic fish aggregations was also estimated to provide scientific inputs to achieve a sustainable management of the moored FAD fishery. The first part presents the background of the study. We introduce the regional pelagic ecosystem, the aggregative behaviour of pelagic fish around FADs and the Martinican moored FAD fishery. The second part begins with a presentation of the conceptual framework of the study: the hierarchy theory. Observation scales and survey methodology are therefore described. Repeated echosounder surveys run in a star pattern were conducted around 2 moored FADs, in combination with underwater video observations, classical fishing experiments and CTD profiles. In the third part, the elements of the [moored FAD ¿ pelagic fish - environment - fishing] system and their interactions are numerically characterised in the vertical plane. The main type of pelagic fish aggregation was a large aggregation distributed in sub-surface (40-100 m) within a radius of 400 m of the FAD. This aggregation was mostly made of 60 cm FL blackfin tunas (Thunnus atlanticus). It appeared at sunrise and mostly spread away in the late afternoon. It was observed during all daytime surveys. The average density and the vertical structure of the micronektonic sound scattering layers (SSLs) were assessed locally around a FAD for 48h cycles. These SSLs descriptors showed positive correlation with the size and the abundance of the sub-surface tuna aggregation. Whereas this aggregation accounted for about 95% of the total biomass aggregated around a moored FAD, it was nearly unexploited by the local commercial fishermen. The fourth part focuses on the sub-surface tuna aggregation. A high variability of the spatial distribution of the aggregation was evidenced in the horizontal plane at daily, day to day and monthly temporal scales. These variations were related to fluctuations of the global abundance of the aggregation. The daytime average density of sub-surface tuna was modelled as a function of the distance to FAD, within an advection-diffusion framework. Based on these results, a universal kriging model was designed to assess the mean maximum daily biomass of the sub-surface tuna aggregation. This mean biomass estimate yielded 11 tons with an estimation error of 26%. To conclude, we present a hierarchical organization in space and time of a sub-surface tuna population distributed within a network of moored FADs, from micro to meso-scale. We suggest that the spatial distribution of tunas can be explained from fine to coarse-scales by behavioural processes (self-organization, feeding, aggregative behaviour) whereas their spatial distribution is mainly forced by environmental processes at broader scales.
L'utilisation de Dispositifs de Concentration de Poissons permet de provoquer la formation de larges agrégations de thonidés autour de dispositifs artificiels, ce qui augmente considérablement la vulnérabilité de ces ressources vis-à-vis de l'exploitation halieutique. Les DCP peuvent également être utilisés en tant qu'observatoires océaniques, afin d'étudier le comportement agrégatif du macronecton pélagique. Nous avons ainsi réalisé des observations autour de DCP ancrés en Martinique, afin de définir une typologie des agrégations de macronecton et de étudier leurs relations avec leur environnement biotique, abiotique et l'exploitation halieutique locale. Nous avons ensuite estimé la biomasse moyenne de macronecton agrégé autour d'un DCP ancré, afin de fournir des éléments scientifiques nécessaires à une gestion durable de ces ressources. La première partie présente le contexte de l'étude i.e. l'écosystème pélagique régional, le phénomène d'agrégation du macronecton autour des DCP et la pêche associée aux DCP ancrés en Martinique. La deuxième partie introduit la théorie de la hiérarchie qui a fourni le cadre conceptuel de l'étude et présente les échelles et méthodes d'observation. Le principal outil d'observation est un échosondeur scientifique, mis en oeuvre le long de parcours en étoile autour du DCP. Les prospections acoustiques ont été combinées à des observations vidéo sous marines, des pêches expérimentales et un suivi in-situ de l'environnement abiotique. La troisième partie présente une typologie des éléments constituant le système [DCP ancré - macronecton - environnement - pêche] dans le plan vertical et précise leurs interactions. Le type d'agrégation de macronecton dominant est une grande agrégation composée d'une majorité de thons noirs (Thunnus atlanticus) de taille moyenne (60 cm) distribuée en sub-surface (40-100 m), dans un rayon de 300 m autour de la tête des DCP. Cette agrégation se forme au lever du soleil et se disperse presque totalement dans l'après midi. Elle a été observée de jour lors de toutes les campagnes. Une corrélation positive entre la densité et la structure moyenne des couches micronectoniques diurnes évaluée localement autour du DCP au cours de 48 h et les dimensions et l'énergie acoustique de l'agrégation de thons de subs-surface a été mise en évidence. Malgré le fait que cette agrégation représente en moyenne 95 % de l'énergie acoustique du macronecton autour des DCP, elle est presque inexploitée par les pêcheurs artisans locaux. La quatrième partie met en évidence les fortes variations conjointes de la distribution spatiale dans le plan horizontal de la densité de l'agrégation de thons de sub-surface et de son abondance globale. Ces variations ont été observées au cours du cycle nycthéméral et aux échelles inter-journalières et mensuelles. La distribution spatiale moyenne de la densité diurne de l'agrégation en fonction de la distance au centre de gravité de l'agrégation est cependant très stable et peut être modélisée au moyen d'une équation d'advection-diffusion. Un modèle de krigeage universel, utilisant les résultats du modèle d'advection-diffusion, a permis d'évaluer la biomasse maximale journalière moyenne de l'agrégation de thons de sub-surface à une dizaine de tonnes, avec un coefficient de variation d'estimation de 26%. Nous proposons une représentation hiérarchique synthétique de la distribution spatiale d'une sous-population de thons dans un réseau de DCP ancrés de la micro à la méso-échelle. Nous suggérons que la distribution spatiale des thons est déterminée principalement à l'échelle fine (100m-1km) et à l'échelle grossière (1-10 km) par des processus comportementaux (auto-organisation, agrégation, nutrition) et par des processus environnementaux à échelle plus large.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2006/these-1735.pdf
http://archimer.ifremer.fr/doc/2006/sup-1735.pdf
http://archimer.ifremer.fr/doc/00000/1735/

Résumé : Sea fish farms with production of more than 20 tons per year in France must obtain two operating licences: (i) one for Sea Farming (AECM), with the aim of ensuring that the granted site and use of the maritime public domain for exploitation will respect all restrictions of general interest; (ii) one for regulating Facilities Classified for the Protection of the Environment (ICPE). Although the first one requires a relatively simple licence request file, the second one demands a very complete file, which includes, beyond the notice of exploitation information, a complete impact study, as well as a hazards study and a health and safety notice. In this context, petitioners in Corsica (adjustment of status or new exploitation) are faced with the same difficulties, which highlighted the need for a methodological guide adapted to each region's specific situation, assembling in particular the necessary baseline data (legal, zootechnical, geographical, climatic, socio-economic, ecological...) as well as recognised methods for evaluating the potential effects of the farm on the environment. Development of this guide was supported by ADEC and supervised by a steering committee composed of representatives from the administrations concerned, fish farmers and scientific bodies. The significant aspects dealt with the effects of fish farming on Posidonie herbarium, a protected species very present in Corsica and with coordinating the two AECM and ICPE procedures. For each part of the ICPE file, the guide introduces the technical or scientific context and, depending upon the case, the state of the art, sources of available data, acquisition and methods of acquiring measurements and of assessing the potential effects, as well as practical editing recommendations. Finally, the guide is made complete by a model schedule of conditions designed to help petitioners to have a specialist research department incorporate all or part of the file. This guide primarily concerns first-time marine facilities for exploitation in Corsica, conceived of as in the open sea rather than in confined spaces. Nonetheless, any fish farmer or future fish farmer needing to process a request for an exploitation licence may find it useful.
Les piscicultures marines de plus de 20 t/an de production sont soumises en France à l'obtention de deux autorisations d'exploiter : (i) celle au titre des Cultures Marines (AECM), visant à s'assurer que le site concédé et l'usage du domaine public maritime pour l'exploitation permettent de respecter l'ensemble des contraintes d'intérêt général ; (ii) celle au titre de la réglementation des Installations Classées pour la Protection de l'Environnement (ICPE). Si la première nécessite un dossier de demande d'autorisation relativement simple, la seconde requiert un dossier très complet, qui comprend, outre une notice de renseignements sur l'exploitation, une étude d'impact complète, ainsi qu'une étude des dangers et une notice d'hygiène et de sécurité. Dans ce contexte, les demandeurs en Corse (régularisation ou exploitation nouvelle) sont confrontés aux mêmes difficultés, ce qui a mis en évidence le besoin d'un guide méthodologique adapté aux spécificités régionales, rassemblant en particulier les données de base nécessaires (juridiques, zootechniques, géographiques, climatiques, socio-économiques, écologiques...) ainsi que les méthodes reconnues de l'évaluation des effets potentiels de la ferme sur l'environnement. L'élaboration de ce guide a été soutenue par l'ADEC et suivie par un comité de pilotage composé de représentants des administrations concernées, des pisciculteurs et d'organismes scientifiques. Les aspects importants ont porté sur les effets de la pisciculture sur l'herbier de Posidonie, espèce protégée très présente en Corse et sur la coordination entre les deux procédures AECM et ICPE. Pour chaque partie du dossier ICPE, le guide présente le contexte technique ou scientifique et selon le cas, l'état de l'art, les sources de données disponibles, les méthodes d'acquisition des mesures et d'évaluation des effets potentiels, ainsi que des recommandations pratiques de rédaction. Enfin, le guide est complété par un cahier des charges type destiné à aider les demandeurs à confier à un bureau d'étude spécialisé la réalisation de tout ou partie de la constitution du dossier. Ce guide concerne prioritairement les installations marines de nouvelles exploitations en Corse, envisagées en mer ouverte plutôt que dans des espaces confinés. Néanmoins tout pisciculteur ou futur pisciculteur devant instruire une demande d'autorisation d'exploiter peut y trouver intérêt.

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/2004/rapport-2188.pdf
http://archimer.ifremer.fr/doc/00000/2188/

Éditeur(s) : HAL CCSD
Résumé : International audience
Understanding subduction rheology in both space and time has been a challenge since the advent of plate tectonics. We herein focus on "subduction infancy", that is the first ~1-5 My immediately following subduction nucleation, when a newly born slab penetrates into the upper plate mantle and heats up. The only remnants of this critical yet elusive geodynamic step are thin metamorphic soles, commonly found beneath pristine, 100-1000 km long portions of oceanic lithosphere emplaced on continents (i.e., ophiolites).Through the (i) worldwide compilation of pressure-temperature conditions of metamorphic sole formation augmented by pseudosection thermodynamic modeling, (ii) calculations of the viscosity of materials along the plate interface and (iii) generic numerical thermal models, we provide a conceptual model of dynamic plate interface processes during subduction infancy (and initiation s.l.).We show in particular how major rheological switches across the subduction interface control slab penetration, and the formation of metamorphic soles. Due to the downward progression of hydration and weakening of the mantle wedge with cooling, the lower plate (basalt, sediment) and the upper plate (mantle wedge) rheologies equalize and switch over a restricted temperature-time-depth interval (e.g., at ~800°C and ~1 GPa, during 0.1-2 My, for high-temperature metamorphic sole formation). These switches result in episodes of maximum interplate mechanical coupling, thereby slicing the top of the slab and welding pieces (basalt, sediment) to the base of the mantle wedge. Similar mechanical processes likely apply for the later, deeper accretion and exhumation of high-temperature oceanic eclogites in serpentinite mélanges, or for the accretion of larger tectonic slices.This model provides constraints on the effective rheologies of the crust and mantle and general understanding, at both rock and plate scale, for accretion processes and early slab dynamics.
AGU Fall Meeting 2015
San Francisco, United States

insu-01242103
https://hal-insu.archives-ouvertes.fr/insu-01242103

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The interpretation of coseismic surface deformation measurements through inversion techniques is of major importance to understand the mechanical behaviour of a seismic fault. Dense geodetic data sets in the vicinity of the ruptured fault provide unique constraints on detailed fault geometry and slip distribution at depth, making them complementary to seismological data. Bam earthquake (Mw 6.6, 2003 December 26) induced surface deformation has been precisely mapped by Envisat ASAR interferometry and by subpixel correlation techniques applied to Spot-5 and ASAR amplitude images. These oblique and horizontal estimations of deformation have been completed with one levelling profile along the main road crossing the rupture from west to east. We process these data (separately and jointly) in a two-step inversion technique, within the elastic half-space theory framework. Our objective is to determine the dislocation model at depth that satisfies simultaneously all the geodetic constraints. Also, we estimate the relative contribution of each geodetic data set to this inversion process.We first use a stochastic direct approach called neighbourhood algorithm in order to estimate the average characteristics of the rupture, and their relative uncertainty. Constraining in this way the geometry of the ruptured fault, we then linearize the inverse problem and compute the slip distribution on the fault using a standard weighted least-square technique, assuming the solution is smooth to some degree. At each step, we discuss the optimal models, their stability as well as the relative influence of each data set on the derived models parameters. Our preferred model reveals a shallow dislocation on a quasi-vertical fault, slightly dipping towards east. The slip vector has a strike-slip component as high as 2 m, while the dip-slip component seems negligible.However, the estimation of the resolution matrices emphasizes the fact that the details of deep fault slip distribution remain out of the scope of this ill-conditioned inverse problem. Yet, our preferred model suggests a main dislocation limited at depth between 1 and 6 km. By contrast, the aftershocks observed in the months following the earthquake are located just beneath the estimated main shock.
ISSN: 0956-540X

hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173
https://hal.archives-ouvertes.fr/hal-00314173/document
https://hal.archives-ouvertes.fr/hal-00314173/file/GJI-2007-169-849-briole.pdf
DOI : 10.1111/j.1365-246X.2007.03358.x

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Wallace (1951) and Bott (1959) were the first to introduce the idea that the slip on each fault surface has the same direction and sense as the maximum shear stress resolved on that surface. However, this simplified hypothesis is questionable since fault mechanical interactions may induce slip reorientations. Earlier numerical geomechanical models confirmed that the slickenlines (slip vectors) are not necessarily parallel to the maximum resolved shear stress but are consistent with local stress perturbations. This leads us to ask as to what extent the Wallace and Bott simplifications are reliable as a basis hypothesis for stress inversion from fault slip data. Here, a geomechanical multi-parametric study using a 3D boundary element method, covering (i) fault geometries such as intersected faults or corrugated fault surfaces, (ii) the full range of Andersonian state of stress, (iii) fault friction, (iv) fault fluid pressure, (v) half space effect and (vi), rock properties, is performed in order to understand the effect of each parameter on the misfit angle between geomechanical slip vectors and the resolved shear stresses. It is shown that significant misfit angles can be found under specific configurations invalidating the Wallace and Bott assumptions, even though fault friction tends to minimize the misfit. We therefore conclude that in such cases, stress inversions based on fault slip data should be interpreted with care.
ISSN: 0040-1951

hal-01218418
https://hal.archives-ouvertes.fr/hal-01218418
DOI : 10.1016/j.tecto.2015.06.030

Éditeur(s) : HAL CCSD Elsevier
Résumé : Carbon emission at volcanic centers requires a constant balance between output (mostly by volcanism, either at plate boundaries or intraplate) and input (mostly at trench settings) of carbon from and to the Earth's mantle. The form of carbon that resides in the mantle is controlled by depth (pressure) and oxygen fugacity, the latter in turn depending on the depth and the concentration of iron in the mantle. In the shallow, lithospheric mantle, carbon is likely to be present in the oxidized form of CO2 (except under cratons where carbon is reduced to graphite or diamond). Below approximately 90 km, in the asthenosphere, the oxidized form of carbon is carbonate, either mineral or melt, depending on the thermal regime. At depths greater than approximately 150 km, the asthenospheric mantle is too reducing for carbon to stay in its oxidized form and only diamond is present, unless there is sufficient hydrogen to form reduced C–H fluids. Hence, the region located in the depth range of 90 to 150 km deep is where carbonatitic melts can most likely be produced and impregnate the surrounding mantle through metasomatism. The upper bound of this region is called the carbonate ledge. This limit prevents carbonate (either solid or molten) from ascending because of degassing and CO2 liberation. The lower bound is a redox front where redox melting (that is, melting caused by oxidation) may take place in an ascending portion of carbon-containing mantle. Carbonatite eruptions and presence of carbonate mineral inclusions in deep-seated diamonds provide evidence that these boundaries can be trespassed in some cases.An analysis of the experimental data that has bearing on silicate melting in the presence of carbon further shows that the carbonate ledge is a melting curve with a negative or flat Clapeyron (dP/dT) slope. In the carbonated ultrabasic (peridotite) systems, the carbonate ledge is located between ~ 2–3 GPa. The ledge divides the pressure–temperature space into a region of low-pressure silicate melt production, and a high-pressure region where carbonatites can be produced. Carbonatitic melts in equilibrium with mantle peridotite have compositions close to dolomitic (approximately equal amounts of Ca and Mg) with a general trend of becoming markedly more magnesian with increasing pressure. Calcic carbonatites may be stable at pressures < 2 GPa if clinopyroxene is absent. At mantle transition zone pressure range, there seems to be a melting temperature decrease (negative fusion slope), which may be caused by the stabilization of majoritic garnet.The carbonated basic (broadly eclogitic) system is more complex than the peridotitic one, because of the strong control of bulk silicate composition on melting temperatures, and hence, on melt composition. In carbonated eclogite systems, we propose that the effect of bulk composition upon all observed features can perhaps be related to silica super-saturation, or lack thereof. In some cases, high calcium (> 80 mol% CaCO3) melts can be produced, making the melting of carbonated eclogites an appealing scenario for the genesis of calcio-carbonatites in the Earth's mantle. Comparison with modeled pressure–temperature paths of subducted oceanic lithosphere shows that fusion of carbonated eclogite at depths shallower than 200 km should be expected for hot (Cascadian-type) subduction thermal regimes. On the other hand, in the case of cooler thermal regimes (Honshu-type, for instance), subducted carbonates may be stable to greater depths in Earth at trench settings, depending on the bulk composition of the system.Furthermore, high-pressure experiments show evidence of a continuum among carbonatitic, kimberlitic, melilititic, and basaltic liquids, for increasing melting degree of carbonated peridotite. This continuum has not been documented in the case of fusion of carbonated eclogite. It may be present, however, when certain sediments are fused, although the silicate melts are granitic to rhyodacitic instead of being kimberlitic in composition. Additional high-pressure work on phase relations in the simple binary system CaCO3–MgCO3 and specific focus on oxide solubility in the vapor phase have the potential to further clarify phase relations on complex silicate–carbonate systems at mantle conditions.
ISSN: 0009-2541

hal-01277770
https://hal.archives-ouvertes.fr/hal-01277770
DOI : 10.1016/j.chemgeo.2015.05.018