Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Hengshan–Wutaishan area forms part of the Trans-North-China Belt developed in response to the final amalgamation of the North China Craton. The Hengshan–Wutaishan domain and the adjacent Fuping massif constitute the largest and the most representative rock exposure of the belt. A structural study allows us to redefine the lithological and tectonic units that compose the architecture of the Hengshan–Wutaishan domain and to propose that the Trans-North-China Belt was built up through a polyphase tectonic evolution within the period 1900–1800 Ma. The first event (D1) corresponds to the emplacement of lower and upper nappes herein called the Orthogneiss and Volcanites Unit (OVU) and the Low Grade Mafic Unit (LGMU), respectively. The OVU mainly consists of rocks formed in an arc system and metamorphosed under amphibolite facies conditions whereas the LGMU represents oceanic crust rocks with an arc component that underwent greenschist facies metamorphism. The syn-metamorphic D1 deformation is characterized by a NW–SE stretching and mineral lineation with a top-to-the SE sense of shear that corresponds to the sense of nappe motion. U–Th–Pb EPM chemical dating on monazite from three metapelites of the OVU gives isochron ages of 1884 ± 11 Ma, 1886 ± 5 Ma and 1887 ± 4 Ma interpreted as the age of the prograde amphibolite facies metamorphism coeval with nappe stacking during the D1 event. The D2 event corresponds to a widespread crustal melting of the OVU and underlying basement rocks in Hengshan related to the exhumation of deep structures about 20–30 Ma after nappe emplacement. The migmatite contains blocks of retrograded eclogite or HP-granulitic restites, and is characterized by the development of a pervasive foliation and lineation. A late D2 event represents the folding stage of the migmatitic foliation during the completion of a dome. The Orthogneiss and Volcanics Unit and the Low Grade Mafic Unit are unconformably covered by weakly metamorphosed to unmetamorphosed sediments belonging to the Hutuo Supergroup. These rocks were deformed by a ductile D3 event, characterized by a NW–SE trending stretching lineation, south verging folds associated with an axial planar slaty cleavage and an E–W crenulation lineation. Lastly, a left-lateral wrenching along the Zhujiafang Shear Zone separates the northern and southern parts of Hengshan. Our structural study shows that there is no significant difference between the southern part of Hengshan and the lower part of Wutaishan, both areas belong to OVU and show a structural continuity. We suggest that this polyphase deformation developed in response to a north-westward subduction of an old ocean, named the Lüliang Ocean, beneath the Western Block, followed by collision with a micro-continent named the Fuping Block at not, vert, similar1890–1880 Ma.
ISSN: 0301-9268

insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594
https://hal-insu.archives-ouvertes.fr/insu-00151594/document
https://hal-insu.archives-ouvertes.fr/insu-00151594/file/Trap-PrecambrainResearch-2007.pdf
DOI : 10.1016/j.precamres.2007.03.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy of the south Iberian upper mantle is investigated using shear-wave splitting of SKS phases. We analyzed teleseismic events recorded by sixteen permanent broadband stations installed on the southern Iberian Peninsula and in northern Africa, and we determined fast polarization directions phi, and delay times delta t between fast and slow components. The area of investigation extends across two important geological structures in the Variscan Iberian Peninsula: the Variscan Iberian Massif in its center, and the Gibraltar arc in the Southeast, that represents the most westerly Alpine belt in the western Mediterranean. Shear-wave splitting measurements from stations in the Betic domain show homogeneous ENE-WSW fast directions nearly parallel to the trend of the mountain belt, and smooth spatial variations. Stations in the North, toward the southern part of the Variscan Iberian Massif show homogeneous fast directions however trending NS to NE-SW, different from those recorded in the Betic. These observations may reflect a post-Hercynian (Variscan) deformation of the Ossa-Morena zone, related to the main stages in the tectonic evolution of this part, namely transpressional stage, transtensional stage and shortening episode, or a deformation related to the posterior Alpine orogeny. Along the Gibraltar arc, we observe a smoothly varying phi trend changing from ENE-WSW in the Eastern Betics to NS in the area of Gibraltar and Ceuta, following more or less the general trend of the mountain belt around the Alboran Sea, and the coastline. Since a similar rotation is also visible in results from Pn anisotropy, this suggests that the anisotropy is vertically coherent starting from just below the Moho. Comparing the anisotropy pattern expected from various geodynamic models with the observed SKS splitting suggests that the anisotropy is best explained by a model of slab rollback, rather than by delamination models.
ISSN: 0012-821X

hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175
https://hal.archives-ouvertes.fr/hal-00412175/document
https://hal.archives-ouvertes.fr/hal-00412175/file/Buontempo_SKS_gibraltar_EPSL2008_hal.pdf
DOI : 10.1016/j.epsl.2008.06.024

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Espinho Branco anatexite, located within a transcurrent, high-temperature shear zone in NE Brazil, was the subject of a comprehensive petrostructural study (Anisotropy of Magnetic Susceptibility - AMS, Anisotropy of Anhysteretic Remanence - AAR, Electron Backscatter Diffraction - EBSD) to evaluate the compatibility of different fabrics with the kinematics of melt deformation. Magnetite dominates susceptibilities larger than 1 mSI and biotite displays [001] lattice directions consistent with AMS k3 axes. In contrast, migmatites with a susceptibility lower than 0.5 mSI and no visible mesoscopic foliation provide crystallographic fabrics distinct from AMS and AAR. However, AAR remains consistent with the regional strain field. These results suggest that the correlation of field, AMS and crystallographic fabrics is not always straightforward despite the relatively simple organisation of the magnetic fabric in the anatexite. We conclude that AMS recorded the final stages of the strain field in the migmatite irrespective of its complex mesoscale structures and contrasting crystallographic fabrics.
ISSN: 0191-8141

hal-00823056
https://hal.archives-ouvertes.fr/hal-00823056
DOI : 10.1016/j.jsg.2012.12.008

Éditeur(s) : HAL CCSD
Résumé : This work focus on the characterization of the source and dynamic of compactional fluids during sedimentary burial, through two complementary examples of late orogenic oil‐field half‐grabens: The exhumed Lodève Permian Basin and a deep buried Jurassic basin in the North Viking Graben (North Sea).Constituting the main part of the thesis, a multi‐disciplinary approach was conducted in the Lodève Basin where Ba‐F‐Cu‐Pb polymetallic mineralized systems are trapped into synrift faults and paleokarsts in the carbonate basement at the hinge point of the rollover. The source, timing and P/T conditions of fluid migration were deduced from the analysis of the microfabric, the fluid inclusions microthermometry, and the isotopic (Sr, S, O, H) and Rare Earth Element (REE) signature. Results are then crossed with a structural and thermal modeling that consolidates the sequence and dynamics of fluid during burial.A similar approach was conducted in the North Viking Graben where fluid markers are restricted to 3D seismic and well core data. Comparable Ba‐Pb‐Zn veins are reported in basin margin, plugging one of the most important siliciclastic hydrocarbon reservoir in the substratum. This analysis provides additional constraints on basinal fluid behavior and allows us to propose a global dynamic model for various compositions of fluids and reservoirs.We conclude to a polyphase fluid sequence history including:(a) In the carbonate basement of the Lodève Basin, karstic paleocanyon incisions and associated cavities coupled to synrift fault, act as major drain for fluids. These structures are early affected by hypogen‐sulfuric karstification in response to the interaction between bacterial oxidation of sulfides entrapped within Lower Permian blackshales and the basement oxidizing aquifer.(b) Disequilibrium compaction initiates overpressure‐driven basinal fluid migration towards basin margins, characterized by temperatures around 150‐180°C and salinities between 9 et 18wt%eq.NaCl. Isotopic (Sr, S, O) and REE analyses reveal that Ba‐M+‐rich mineralizing fluids derived mainly from buried blackshales diagenesis. External fluids coming from the lower crust are also identified that play a key role in fluorite precipitation by the leaching of late hercynian granites (mean temperature of 250°C and salinity > 20wt%eq.NaCl).(c) During the synrift period, fluid overpressure is responsible for the periodic reactivation of fault plane according to seismic‐valve process, bedded‐control shearing and hydraulic brecciation at the basement‐seal interface. These mechanisms induce cyclic polymetallic mineralization by the mixing between in‐situ formation water and deep ascending basinal fluids.(d) Thermogenic fluids expulsion starts with last basinal fluids during late burial stage. Hydrocarbons thus migrate along the same regional pathways up to the rollover crest, where they are partly rerouted by the previous mineralized baffle.(e) In the Lodève basin, post‐rift exhumation of the margins led to the remobilization of synrift deposits by subaerial biochemical processes at the sulfate‐methane transition. The latter results from the interaction between the still active hydrocarbon dysmigration with a playa lake sulfate‐rich aquifer. Secondary low‐temperature barite fronts precipitate then within basement meteoric karsts.In addition to the « source to sink » model of basinal fluids, this work provides new insights on the early plugging of hydrocarbon reservoirs and for the metallogenesis of Mississippi Valley‐Type deposits.
Ce travail porte sur la caractérisation de la source et de la dynamique des fluides de bassin au cours de leur chargement à travers deux exemples complémentaires de demi‐grabens tardi‐orogéniques pétroliers : Le Bassin Permien de Lodève, aujourd’hui à l’affleurement et un bassin jurassique enfouis dans le North Viking Graben (Mer du Nord).Le coeur de la thèse concerne le Bassin de Lodève où, à partir d’une approche pluridisciplinaire intégrée, nous avons caractérisé l’architecture des minéralisations (Ba, F, Cu, Pb) piégées dans un réseau paléokarstique alimenté par les failles syn‐rift, dans le substratum carbonaté à l’apex du roll‐over. La source, le calendrier et les conditions de migration des fluides ont été approchés à partir de l’analyse de la micro‐fabrique, la microthermométrie sur inclusions fluides, les analyses isotopiques (Sr, S, O, H) et de Terres Rares. Les résultats analytiques ont été enfin croisés avec un modèle thermique et structural du bassin qui conforte la séquence et la dynamique du système fluide en cours d’enfouissement.Une démarche similaire, mais plus limitée, a été conduite dans le bassin du North Viking Graben où l’accès aux marqueurs fluides est restreint aux données de sismique 3D et de carottes. Comme à Lodève, les minéralisations Ba‐Pb‐Zn colmatent un réservoir dans le substratum à l’apex du roll‐over. Elles se présentent sous forme de ciments dans des grès ou des fractures. Cette analyse apporte des contraintes complémentaires et permet de proposer un modèle dynamique général avec des variantes en fonction de la nature des fluides et des réservoirs.On retiendra donc la séquence fluide suivante :(a) Dans le cas du bassin de Lodève sur substratum carbonaté, les chemins préférentiels de drainage se développent dans des paléocanyons N‐S couplés à un réseau de fractures et d’endokarsts météoriques. Ces derniers sont élargis en début de rifting par la dissolution hypogène sulfurique produite par l’oxydation bactérienne des sulfates et des pyrites des blackshales, au contact de l’aquifère oxydant du Cambrien.(b) Le déséquilibre de compaction initie la migration des fluides interstitiels en surpression vers les marges avec des températures autour de 150‐180°C et des salinités entre 9 et 18wt%eq.NaCl. Les analyses isotopiques (Sr, S, O) révèlent que la majorité des fluides provient de l’altération diagénétique des blackshales riches en métaux. Des interactions sont également mises en évidence avec des fluides profonds (entre 240°C et 260°C ; salinités > à 20wt%eq.NaCl), qui lessivent les granites tardi‐hercyniens.(c) Pendant le syn‐rift, les conditions de surpression de fluide permettent la réactivation cyclique des failles, les décollements stratigraphiques et la formation de brèches hydrauliques, favorisant la mise en connexion avec les réservoirs superficiels à l’apex du rollover. Le modèle de Sibson ajusté aux fluides de bassins est alors le moteur de la migration verticale.(d) Les fluides thermogéniques commencent à être expulsés avec les derniers fluides de compaction au cours d’un stade plus évolué de l’enfouissement en empruntant les mêmes chemins jusqu’à l’apex du roll over. Ils sont alors partiellement freinés et déviés par les colmatages minéralisés antérieurs.(e) A Lodève, la continentalisation des minéralisations antérieures au cours de l’exhumation post‐rift conduit à leur remaniement partiel au niveau de la transition sulfate‐méthane induite par l’interaction entre une playa évaporitique et la dysmigration des hydrocarbures. Des barytines secondaires de basse température, déprimées en Sr sont alors précipitées de manière synsédimentaire dans des karsts météoriques du socle.Outre l’illustration d’un modèle complet (source to sink) de dynamique des fluides dans un bassin, ce travail apporte de nouvelles contraintes dans l’approche du colmatage des réservoirs à hydrocarbures sur les têtes de blocs basculés et sur la genèse des gîtes miniers de type Mississippi Valley‐Type.
https://hal.archives-ouvertes.fr/tel-01457583

tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583
https://hal.archives-ouvertes.fr/tel-01457583/document
https://hal.archives-ouvertes.fr/tel-01457583/file/th%C3%A8seLaurent2015V2.pdf

Éditeur(s) : HAL CCSD
Résumé : The sandy coasts of Languedoc-Roussillon are a zone vulnerable to erosion and flooding. These hazards are generally associated with a combination of natural factors such as waves, wind, rising sea levels and the importance of sediment supply, and are therefore worsened during storms. For the management of such risks, a better knowledge of the hydrodynamic phenomena occuring from the surf zone through to the coastal scale is essential. This need led to the development of a numerical modelling platform consisting of the 3D ocean circulation model Symphonie, usually dedicated to regional and coastal scales, which was modified to include the wave forcing, modeled by the WaveWatch III or Swan models. Using this platform the entire littoral and coastal regions can be accurately represented. The model was tested in several academic cases. Measurements on the barred beach of Sète during the winter of 2008-2009 served to refine the model, which is able to successfully reproduce the characteristics of the currents in coastal areas, drifts or rip currents over more complex bathymetries and also the vertical profiles of currents. To validate the model on the inner-shelf, we compared the simulations with measurements taken during a winter storm in 2004 around the mouth of the Têt river, as well as during storms in 2007 and 2008 in the Gulf of Aigues-Mortes. Currents are generally well reproduced. However, the scope of wave action seems limited to a depth of 30m. The characteristics of our model allow a good reproduction of the currents at all scales and the 3D nature of the model permits a more precise calculation of the shear stress and bottom current responsible, respectively, for the suspension and advection of sediments.
Le littoral sableux du Languedoc-Roussillon est un système vulnérable aux risques d'érosion et de submersion. Ces aléas sont liés à la conjonction des facteurs naturels que sont les vagues, vent, élévation du niveau de la mer et apports sédimentaires et sont donc aggravés en période de tempête. En vue d'une gestion des risques, une meilleure connaissance des phénomènes hydrodynamiques de l'échelle littorale à l'échelle côtière est essentielle. Ce travail a conduit à la réalisation d'une plateforme de modélisation numérique composée du modèle de circulation océanique 3D Symphonie, traditionnellement dédié aux échelles régionales et côtières, qui a été modifié pour inclure le forçage par les vagues, modélisées par les modèles Wavewatch III ou Swan, et ainsi étendre sa validité au littoral. Le modèle a été testé sur des cas académiques littoraux. Des mesures sur la plage à double barres de Sète pendant l'hiver 2008-2009, ont également servi à parfaire le modèle qui reproduit ainsi avec succès les caractéristiques des courants en zone littorale : la dérive, les courants sagittaux sur des bathymétries plus complexes et les profils verticaux des courants. Pour valider le modèle à des échelles plus côtières, nous avons confronté ses résultats à des mesures réalisées pendant une tempête hivernale en 2004 aux alentours de l'embouchure de la Têt, mais également sur des tempêtes de 2007 et 2008 dans le Golfe d'Aigues-Mortes. Les courants sont globalement bien reproduits. Les zones d'action des vagues semblent limitées aux zones de profondeur inférieure à 30 m. Notre modèle autorise une reproduction correcte des courants à toutes les échelles et sa nature 3D permet un calcul plus précis de la tension de cisaillement de fond et du courant près du fond, responsables respectivement de la mise en suspension et de l'advection des sédiments.
https://tel.archives-ouvertes.fr/tel-00680405

tel-00680405
https://tel.archives-ouvertes.fr/tel-00680405
https://tel.archives-ouvertes.fr/tel-00680405v2/document
https://tel.archives-ouvertes.fr/tel-00680405/file/2011_MICHAUD.pdf

Éditeur(s) : HAL CCSD American Physical Society
Résumé : International audience
Using contact dynamics simulations, we compare the effect of rolling resistance at the contacts in granular systems composed of disks with the effect of angularity in granular systems composed of regular polygonal particles. In simple shear conditions, we consider four aspects of the mechanical behavior of these systems in the steady state: shear strength, solid fraction, force and fabric anisotropies, and probability distribution of contact forces. Our main finding is that, based on the energy dissipation associated with relative rotation between two particles in contact, the effect of rolling resistance can explicitly be identified with that of the number of sides in a regular polygonal particle. This finding supports the use of rolling resistance as a shape parameter accounting for particle angularity and shows unambiguously that one of the main influencing factors behind the mechanical behavior of granular systems composed of noncircular particles is the partial hindrance of rotations as a result of angular particle shape.
ISSN: 1539-3755

hal-00594891
https://hal.archives-ouvertes.fr/hal-00594891
https://hal.archives-ouvertes.fr/hal-00594891/document
https://hal.archives-ouvertes.fr/hal-00594891/file/Estrada2010ReSubmitV2.pdf
ARXIV : 1105.4418

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD Cambridge University Press (CUP)
Résumé : In NW Turkey, the medium-grade Kemer micaschists of the Biga Peninsula record NE-directed extension related to ductile to brittle–ductile shearing during the Palaeogene period: a lower limit for their exhumation is given by the Late Maastrichtian age of the HP–LT metamorphism of a similar nearby area (Çamlica micaschists); an upper limit is given by the Early Eocene intrusion age of the post-kinematic Karabiga granitoid, dated as 52.7 ± 1.9 Ma using the U–Pb LA–ICP–MS method on xenotime. Correlations with the northeasterly Rhodope region and integration into the geodynamic regional frame indicate that the Kemer micaschists experienced an extensional deformation connected to a collisional context in latest Cretaceous–early Tertiary times. The Kemer micaschists therefore represent a new area (the first in Turkey), which suffered synorogenic extension in the north Aegean domain at the very beginning of Tertiary times.
ISSN: 0016-7568

hal-00407955
https://hal.archives-ouvertes.fr/hal-00407955
DOI : 10.1017/S001675680700310X

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The Chaînons Béarnais ranges (North-Pyrenean Zone, west-central Pyrenees) display a fold-and-thrust structure involving the Mesozoic sedimentary cover, decoupled from its substratum at the Keuper evaporites level and associated with a few peridotite bodies and scarce Palaeozoic basement lenses. In the western part of the Chaînons Béarnais, the newly described recumbent fold of the Saraillé massif comprises a peridotite body and several lenses of Palaeozoic basement wrapped by the Triassic to Aptian sedimentary cover. This structure represents a remnant of the distal portion of the Pyrenean paleo-rifted margin where mantle rocks have been exhumed during Albian–Cenomanian times. In this paper, we present the first detailed mapping and microstructural analysis of the Saraillé massif, providing new geological basis for reconstructing the evolution of this part of the paleo-margin. Our mapping (i) shows that the pre-rift Mesozoic cover forms a recumbent fold cored by mantle and crustal rocks and (ii) confirms that the prerift cover was detached from its bedrock along a layer of Triassic evaporites and slid onto the exhumed mantle rocks. Sliding of the prerift cover was associated with extreme crustal thinning and mantle exhumation along a major detachment fault, together with intense metasomatism affecting both the continental basement and the sedimentary cover. We show for the first time (1) that the Mesozoic pre-rift sediments experienced syn-metamorphic ductile thinning during mantle exhumation, and (2) that during its extreme attenuation, the continental basement was reduced to tectonic lenses some ten meters thick by ductile shearing.
ISSN: 1631-0713

insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777
https://hal-insu.archives-ouvertes.fr/insu-01265777/document
https://hal-insu.archives-ouvertes.fr/insu-01265777/file/corre-CRGeosc-2016.pdf
DOI : 10.1016/j.crte.2015.11.007

Éditeur(s) : HAL CCSD Geological Society
Résumé : International audience
Deformation mechanisms, long-term kinematics and evolution of fold and thrust belts subjected to erosion are studied through 2D analogue experiments involving large convergence. First-order parameters tested include (1) décollements and/or plastic layers interbedded at different locations within analogue materials and (2) synconvergence surface erosion. Weak layers, depending on their location in the model, favour deformation partitioning characterized by the simultaneous development of underplating domains in the inner part of the wedge (basal accretion) and frontal accretion where the wedge grows forward. Interaction between tectonics and surface processes influences this behaviour. Development of antiformal thrust stacks controlled by underplating shows small- and large-scale cyclicity. Thin plastic layers induce folding processes, which are studied at wedge scale. Recumbent and overturned folds, with large inverted limbs, develop in a shear-induced asymmetric deformation regime via progressive unrolling of synclinal hinges. Surface erosion and underplating at depth induce further rotation (passive tilting) and horizontalization of fold limbs. Model results give insights to discuss the mechanisms responsible for the large-scale structures (i.e. antiformal nappe stacks, klippen and kilometre-scale recumbent fold-nappes) encountered in several mountain belts such as the Montagne Noire (French Massif Central), the Galicia Variscan belt (Spain) and the northern Apennines (Italy).
ISSN: 0016-7649

hal-00937644
https://hal.archives-ouvertes.fr/hal-00937644
DOI : 10.1144/jgs2013-012

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
In East Asia, widespread extensional sedimentary basins together with the close association of Metamorphic Core Complexes and magmatism are prominent features of the large-scale wide rift system developed during late Mesozoic times. This region thus appears as a proper place to study continental extension as well as questions about the link between continental extension and magmatism. This paper primarily provides pioneer exhumation time-constraints on the Linglong MCC (Jiaodong Peninsula) including cooling and deformation ages. MCC cooling at mid-crustal levels occurred at ca. 143 Ma. Besides, last ductile deformation occurred at ca. 134 Ma while final exhumation stages, under brittle 2 conditions, occurred as late as ca. 128 Ma. Continuous crustal stretching were then recorded by the emplacement of a synkinematic pluton in the upper crust at ca. 128 Ma that cooled fast below an intracrustal shear zone crossing the ductile-brittle transition at ca. 123 Ma. The ca. 120-118 Ma age cluster is ascribed to the fast cooling of undeformed plutons marking the end of extension that lasted, in the area, over a minimum period of ca. 30 My. Combining other MCC exhumation constraints and the onset of subsidence in the sedimentary basins, total duration of late Mesozoic extension in East Asia could be estimated at ca. 60 My, related with a rather long process for extension from 160 to at least 100 Ma. East Asian continental extension is heterogeneously distributed in space and time as revealed by fundamental differences between two end-member classes of migmatite-cored MCC already described in other wide rift systems. Extension seems to have first favoured partial melting which subsequently, in turn, maintained continental extension.
ISSN: 1342-937X

insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551
https://hal-insu.archives-ouvertes.fr/insu-00752551/document
https://hal-insu.archives-ouvertes.fr/insu-00752551/file/Charles_et_al_Gondwana_Research_2012.pdf
DOI : 10.1016/j.gr.2012.10.011

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
P>The Strait of Hormuz area is a transition zone between the continental collision of the Zagros (west) and the subduction of an oceanic part of the Arabian Plate beneath the Makran wedge (east). Geology and recent GPS measurements indicate that about 15 mm yr-1 of relative motion in N10 degrees E direction is accommodated by two major fault systems: (1) the NNW-trending Minab-Zendan-Palami (MZP) fault system that connects the Main Zagros Thrust (MZT) to the inner Makran thrust system and the Frontal subduction thrust and (2) the N-trending Sabzevaran-Kahnuj-Jiroft (SKJ) fault system that bounds the Jazmurian depression to the west. We use dense GPS measurements along four transects across these fault systems in order to determine the strains spatial distribution. The northern GPS transect confirms the total fault slip rates for both fault systems estimated by the tectonic analyses (about 10 and 7.3 mm yr-1 in N10 degrees direction across the MZP and SKJ fault systems, respectively). For both fault systems, the elastic deformation spreads over shear zones that are several tens of kilometres wide. However, transects located close to latitude 27 degrees N reveal a much narrower shear zone (similar to 10 km) for the MZP fault system. Moreover, we confirm that most of the present-day strain is transferred towards the frontal subduction thrust rather than towards the inner Makran thrusts. In order to complement this new GPS velocity field with spatially dense measurements, we processed a set of ERS radar images by the radar interferometry (InSAR) technique. We used both a 'stacking' and a 'persistant-scatterers' approach to differentiate the ground deformation signal which spatial gradient is expected to be very low, from the atmospheric signal. Results from these interferograms appear to be relatively in agreement with the GPS-determined strain distribution. Nevertheless, they confirm the absence of any superficial creep behaviour since no sharp discontinuity on interferometric phase can be noted on any interferogram. Finally, we use a purely kinematic 'block model' inversion process to calculate slip rates and locking depths for each fault system from our GPS measurements. These models suggest that the relative quiescence over the last 200 yr has certainly produced a slip deficit as high as 2 m. So, we may wonder if the MZP fault system is not late in the interseismic phase of its earthquake cycle.
ISSN: 0956-540X

hal-00429386
https://hal.archives-ouvertes.fr/hal-00429386
DOI : 10.1111/j.1365-246X.2009.04321.x

Éditeur(s) : HAL CCSD
Résumé : International audience
Debris avalanches derived from the flanks of volcanic islands are among the largest on Earth. Debris avalanches are rare, catastrophic destabilizations that still keep geologists debating about the mechanisms that initiate them and make them travel huge runout distances. To shed light on the trigger of such destabilizations, we studied the inland scar of a debris avalanche deposit cropping out at Piton des Neiges, a dormant and eroded basaltic volcano of La Réunion Island. The avalanche deposit rests on a pile of 50-70 sill intrusions with a shallow northward dip, i.e. toward the sea. We measured the anisotropy of magnetic susceptibility in a transect across the uppermost sill of the pile in contact with the avalanche deposit. This transect reveals a strongly asymmetric magnetic fabric, consistent with a north-directed shear movement of the upper intrusion wall. This suggests that the upper sill induced a co-intrusive shear displacement of the volcano flank toward the sea. The upper sill margin in contact with the avalanche is striated, showing that this intrusion is older than the avalanche. Striae indicate a northward direction of avalanche runout. The upper sill margin also displays a magmatic lineation consistent with a magma flow in the intrusion toward the north. There is thus a striking kinematic consistency between the directions of intrusion propagation and avalanche runout, both oriented toward the sea. From the above results, we propose that repeated sill intrusions, such as observed on Piton des Neiges, increase the instability of a volcanic edifice. Each injection induces an incremental slip of the overlying rock mass, which may eventually end up into a landslide. Sill intrusions associated with seaward displacements of volcano flank, such as inferred for the April 2007 eruption of Piton de la Fournaise (also in La Réunion), should therefore be considered as a potential trigger of debris avalanches.
Fall meeting
San Francisco, United States

hal-01387002
http://hal.univ-reunion.fr/hal-01387002

Éditeur(s) : HAL CCSD Botanical Society of America
Résumé :  
International audience
The different hypotheses about buttress function and formation mainly involve mechanical theory. Forces were applied to two trees of Sloanea spp., a tropical genus that develops typical thin buttresses, and the three-dimensional strains were measured at different parts of the trunk base. Risks of failure were greater on the buttress sides, where shear and tangential stresses are greater, not on the ridges, in spite of high longitudinal (parallel to the grain) stresses. A simple beam model, computed from the second moment of area of digitized cross sections, is consistent with longitudinal strain variations but cannot predict accurately variations with height. Patterns of longitudinal strain variation along ridges are very different in the two individuals, owing to a pronounced lateral curvature in one specimen. The constant stress hypothesis is discussed based on these results. Without chronological data during the development of the tree, it cannot be proved that buttress formation is activated by stress or strain.
ISSN: 0002-9122

hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155
https://hal.archives-ouvertes.fr/hal-01032155/document
https://hal.archives-ouvertes.fr/hal-01032155/file/Biomechanics_buttressed_trees_Clair_al_2003.pdf
DOI : 10.3732/ajb.90.9.1349

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : International audience
New petrographic and microstructural observations, mineral equilibria modelling and U/Pb (monazite) geochronological studies were carried out to investigate the relationships between deformation and metamorphism across the Rehamna massif (Moroccan Variscan belt). In this area, typical Barrovian (muscovite to staurolite) zones developed in Cambrian to Carboniferous metasedimentary rocks that are distributed around a dome-like structure. First assemblages are characterized by the presence of locally preserved andalusite, followed by prograde evolution culminating at 6 kbar and 620 °C in the structurally deepest staurolite zone rocks. This Barrovian sequence was subsequently uplifted to supracrustal levels, heterogeneously reworked at greenschist facies conditions, which was followed locally by static growth of andalusite, indicating heating to 2.5–4 kbar and 530–570 °C. The 206Pb/238U monazite age of 298.3 ± 4.1 Ma is interpreted as minimum age of peak metamorphic conditions, whereas the ages of 275.8 ± 1.7 Ma and 277.0 ± 1.1 Ma date decompression and heating at low pressure, in agreement with previous dating of Permian granitoids intruding the Rehamna massif. The prograde metamorphism occurred during thickening and associated horizontal flow in the deeper crust (S1 horizontal schistosity). The horizontally disposed metamorphic zones were subsequently uplifted by a regional scale antiform during ongoing N–S compression. The re-heating of the massif follows late massive E–W shortening, refolding and retrograde shearing of all previous fabrics coevally with regionally important intrusions of Permian granitoids. We argue that metamorphic evolution of the Rehamna massif occurred several hundred kilometres from the convergent plate boundaries in the interior of continental Gondwanan plate. The tectonometamorphic history of the Rehamna massif is put into Palaeozoic plate tectonic perspective and Late Carboniferous reactivation of (Devonian)–Early Carboniferous basins formed during stretching of the north Gondwana margin and formation of the Palaeotethys Ocean. The inherited heat budget of these magma-rich basins plays a role in the preferential location of this intracontinental orogen. It is shown that rapid transition from lithospheric stretching to compression is characterized by specific HT type of Barrovian metamorphism, which markedly differs from similar Barrovian sequences along Palaeozoic plate boundaries reported from Variscan Europe.
ISSN: 0263-4929

hal-01468009
https://hal.archives-ouvertes.fr/hal-01468009
DOI : 10.1111/jmg.12214

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Fractures or discontinuities perpendicular to the least stress σ3 were generated in a synthetic rock analogue (granular, frictional, cohesive, and dilatant) material in axisymmetric extension tests. These fractures are of two types defined by the mean stress σ. When σ is very small, the fractures form through the mode I cracking at tensile σ3 equal to the material tensile strength. The fracture walls have smooth surfaces. At higher σ, these surfaces become rougher, with the topography features forming faint or delicate plumose patterns. The amplitude of the plumose topography increases with σ. The axial stress σ3 at fracturing reduces in magnitude and changes in sign with the σ increase. Thus σ3 orthogonal discontinuities can form at compressive σ3. SEM observations show that these discontinuities are deformation localization bands where the material is characterized by the heterogeneous decohesion and volume and porosity increase due to dilatancy. The band thickness is several grain sizes. At formation, the bands are not opened, so they are not mode I fractures. They become fractures with plumose fractography after the separation of the sample parts along the band. The formation mechanism of these discontinuities or fractures is not completely clear, but it is suggested that it represents a running constitutive instability in the form of dilatancy banding (with further σ increase the bands become inclined to σ1, i.e., shear). The similarity between the experimentally generated plumose surface fractures and natural joints is discussed, and it is suggested that they can be formed as propagating constitutive instabilities.
ISSN: 0148-0227

hal-00585846
https://hal.archives-ouvertes.fr/hal-00585846
DOI : 10.1029/2010JB008104

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Seismic anisotropy originating within the continental crust is used to determine kinematic flow lines within active mountain belts and is widely attributed to regionally aligned mica. However, naturally deformed micaceous rocks commonly show composite (e.g. S-C) fabrics. It is necessary therefore to understand how both varying mica content and differing intensities of multiple foliations impact on seismic interpretations in terms of deformation fields. An outcrop analogue for granitic mid-crustal deformed zones is used here to calibrate the seismic response against both parameters. Seismic responses are modelled using crystallographic preferred orientations for polymineralic, micaceous granitic gneisses, measured using Electron Back-Scatter Diffraction. The sample results are generalised by modelling the effects of variations in modal composition and the relative importance of deformation fabrics of variable orientation, so-called rock and fabric recipes. The maximum P- and S-anisotropy are calculated at 16.6% and 23.9% for single-foliation gneisses but for mixed (i.e. S-C) foliation gneisses these values reduce to 5.8% and 7.5% respectively. Furthermore, mixtures of multiple foliations generate significant variations in the geometry of the seismic anisotropy. This effect, coupled with the geographical orientation of fabrics in nature. can generate substantial variations in the orientation and magnitude of seismic anisotropy (especially for shear waves) as measured for the continental crust using existing receiver function and teleseismic near-vertical incidence methods. Thus, maps of seismic anisotropy varying with depth in deforming continents need not imply necessarily depth-varying deformation kinematics and tectonic decoupling.
ISSN: 0012-821X

hal-00445247
https://hal.archives-ouvertes.fr/hal-00445247
DOI : 10.1016/j.epsl.2009.09.035

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Longmen Shan (Sichuan, China) is characterised by an unusual morphology which results from a Triassic prism tectonics and a more recent Neogene thick-skin thrusting. Among its specific features is the high elevation of the internal zones in continuity with the Songpan Garze fold-and-thrust belt (SG), which is associated with an abrupt 20 km Moho offset between the Sichuan Basin and the Tibetan plateau as revealed by the analysis of teleseismic data acquired by a dense seismic network. The jump in crustal thickness is located at the apex of the Wenchuan shear zone (WSZ) and marks the western boundary of the metamorphosed units of SG characterized by temperatures varying from 590 degrees C down to 300 degrees C as commonly observed in mature accretionary wedges. Both the structural style marked by intense shortening in tight kink folds and geophysical data suggest the presence of an horizontal discontinuity at similar to 15 km depth over a thick crust (similar to 63 km).;The Longmen Shan east of the WSZ is characterized by thick-skin detachment which thrusts the internal sedimentary units and the Proterozoic basement over the series of the Sichuan Basin deposited on a thinner crust of similar to 44 km thick. The major front is the Beichuan Fault Zone (BFZ) which brought the internal zones onto Triassic and Jurassic series with lower temperatures (less than 400 degrees C). Locally, temperatures of similar to 425 degrees C are found just below the klippes.;These results are in agreement with an original contact of the SG zone represented by an accretionary wedge of sediments thrusted over the margin of the continental crust of the Yangtze craton in the early stage (Indosinian) of the evolution. The present-day slow E-W component of the convergence, added to the difference in crustal thickness caused the Yangtze crust to indent the Songpan Tibetan crust which was softened by a high thermal regime. As a response the edge of the Tibet crust was inflated to the bottom (up to 70 km), whereas to the top, the crystalline massif were exhumed and pushed the deformation eastward as emerging and blind thrusts. This configuration reflects a moderate shortening of the crust which behaves as a soft thick material abutting the resistant and cold Yangtze crust.
ISSN: 0040-1951

hal-00534849
https://hal.archives-ouvertes.fr/hal-00534849
DOI : 10.1016/j.tecto.2010.03.018

Éditeur(s) : HAL CCSD
Résumé : A section of ancient fast-spreading ocean crust was sampled at Wadi Gideah, located in the Wadi Tayin Massif of the Oman ophiolite. This sample suite was used for generating a coherent data set combining various petro-geochemical and structural investigations, with the aim of building a reference section for advancing our understanding of crustal accretion processes at fast-spreading mid-ocean ridges. Additionally, this study focuses on one outcrop that represents part of the fossil axial melt lens (AML).Major and trace element analyses reveal a trend of chemical evolution up section in the lower crust, with a marked difference between the layered gabbros and the foliated gabbros above. Petrological modeling shows that the chemical evolution up section can be produced by hydrous fractionation crystallization, with melt H2O contents of ~0.8 wt% and 0.8 to 1.2 wt% for the lower and upper crust, respectively. Together with the observed very steep bulk Zr/Hf vs. Zr gradient, high F and Cl content of magmatic amphibole, general Nb-Ta depletion of melts compared with NMORB, and high Sr87/Sr86 ratio compared with modern fast-spread crust, this suggests that Wadi Gideah layered gabbros were accreted by crystallization of ascending melts in sills, in a context of subduction initiation. The distinct changes in chemical trends and average grain size at the layered to foliated gabbro transition are tentatively explained by enhanced hydrothermal cooling deeper than the AML. The gabbro/dike transition displays complex structural and lithological relationships that, together with fractional crystallization modeling, point to episodic vertical movements of the AML. Plagioclase crystallographic preferred orientations (CPO) measured over the whole gabbro section are always consistent with magmatic flow. The CPO strength generally increases downward, with more scattering in the layered gabbro section. From the top to the bottom of the layered gabbros, CPO become progressively more prolate, possibly reflecting increasing shear induced by active mantle flow underneath.Wadi Gideah lower crust recorded a formation history consistent with a hybrid accretion model, combing several processes such as downward magmatic flow and/or upward melt migration in the upper foliated gabbros, sill intrusions in the layered gabbros, and deep hydrothermal circulation. The latter was presumably focused in channels, preserved today as several, up to 100 m wide zones of extensively altered former layered gabbro, cross-cutting the magmatic layering. These metagabbros display significantly higher Sr87/Sr86 ratio, late stage magmatic phases, and evidence for high temperature partial melting.
Une coupe d'ancienne croute océanique rapide a été échantillonnée dans le Wadi Gideah, situé dans le Massif de Wadi Tayin de l'Ophiolite d'Oman. Cette série d'échantillons a permis de générer un jeu de données cohérent, combinant des études pétro-géochimiques et structurales, dans le but de construire une coupe de référence pour mieux contraindre notre compréhension des processus d'accrétion crustale aux dorsales océaniques rapides. Ce travail intègre aussi l'étude détaillée d'un affleurement représentant en partie la lentille magmatique axiale (LMA) fossile.Les analyses d'éléments majeurs et traces révèlent une évolution chimique dans la croûte inférieure, avec une nette différence entre les gabbros lités et les gabbros foliés sus-jacents. La modélisation pétrologique montre que l'évolution chimique vers le haut peut être produite par cristallisation fractionnée hydratée, avec des teneurs en H2O des magmas de ~0.8 wt% dans la croute inférieure et 0.8 to 1.2 wt% dans la croute supérieure. Combiné aux forts gradients de Zr/Hf vs. Zr, aux teneurs élevées de F et Cl dans les amphiboles magmatiques, à l'appauvrissement général en Nb-Ta des magmas comparé aux NMORB, et aux rapports Sr87/Sr86 élevés comparés à la croûte rapide moderne, ceci suggère que les gabbros lités du Wadi Gideah ont été formés par la cristallisation des magmas ascendants dans des sills, dans un contexte d'initiation de subduction. Les changements de signature géochimique et de taille de grain à la transition entre gabbros lités et gabbros foliés témoignent possiblement d'un fort refroidissement hydrothermal plus profond que la LMA. La transition complexe filonien/gabbro montre des relations structurale et lithologiques complexes, qui, combinées o la modélisation de la cristallisation fractionnée, traduisent les mouvements verticaux épisodiques de la LMA. Les orientations préférentielles cristallographiques (OPC) des plagioclases mesurées sur l'ensemble de la coupe dans les gabbros témoignent toujours d'une déformation magmatique. L'intensité des OPC a tendance à augmenter vers le bas, avec une plus forte variabilité dans les gabbros lités. Dans les gabbros lités, les OPC sont de plus en plus linéaires vers le bas, résultant possiblement d'un cisaillement plus fort induit par l'écoulement actif du manteau sous-jacent.La croûte inférieure dans le Wadi Gideah a enregistré une histoire compatible avec un modèle d'accrétion hydride, combinant plusieurs processus tels que l'écoulement magmatique vers le bas et/ou la migration de liquides magmatiques vers le haut dans les gabbros foliés supérieurs, l'intrusion de sills dans les gabbros lités, et une circulation hydrothermale profonde. Cette dernière était probablement concentrée dans des chenaux, préservés aujourd'hui sous la forme de plusieurs zones, dont l'épaisseur atteint 100 m, de gabbros lités fortement altérés, recoupant le litage magmatique. Ces métagabbros ont des rapports Sr87/Sr86 élevés, comportent des phases magmatiques tardives et montrent des évidences de fusion partielle.
https://hal.archives-ouvertes.fr/tel-01302675

tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675
https://hal.archives-ouvertes.fr/tel-01302675/document
https://hal.archives-ouvertes.fr/tel-01302675/file/Th%C3%A8se_Tim-Mueller_2015.pdf

Éditeur(s) : HAL CCSD Elsevier Masson
Résumé : International audience
The seismological study of recent seismic crises near Oleron Island confirms the coexistence of an extensional deformation and a transtensive regime in the Atlantic margin of France, which is different from the general western European stress field corresponding to a strike-slip regime. We argue that the switch of the principal stress axes σ1/σ2 in a NW-SE vertical plane is linked with the existence of crustal heterogeneities. Events of magnitude larger than 5 sometimes occur along the Atlantic margin of France, such as the 7 September 1972 (ML = 5.2) earthquake near Oleron island and the 30 September 2002 (ML = 5.7) Hennebont event in Brittany. To test the mechanism of local strain localization, we model the deformation of the hypocentral area of the Hennebont earthquake using a 3D thermo-mechanical finite element code. We conclude that the occurrence of moderate earthquakes located in limited parts of the Hercynian shear zones (as the often reactivated swarms near Oleron) could be due to local reactivation of pre-existing faults. These sporadic seismic ruptures are favoured by stress concentration due to rheological heterogeneities.
ISSN: 1631-0713

hal-00936220
https://hal.archives-ouvertes.fr/hal-00936220
DOI : 10.1016/j.crte.2013.07.004