Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have a fractal pore-grain interface. In this paper a computer simulated 3-D sedimentary rock structure generated by the Relaxed Ballistic Bidisperse Deposition Model (RBBDM), is investigated to characterize the micro structure of its pores. The pore volume and the rock-pore interface show the same fractal dimension indicating that the pore volume is a fractal. The two point density correlation is computed for the pore space and the results compare favourably with the range reported from experiments. An array of 2-D X-ray tomography micrograph sections of a real sedimentary rock, an oolitic limestone (pure calcite) from the Mondeville formation of Middle Jurassic age (Paris Basin, France), was used to generate a 3-D bitmap. The 3-D real rock sample generated in this manner, was analysed for similar studies as the simulated structure. The results were compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. Diffusion through the connected pore space of the simulated structure was studied using a random walk algorithm and the results compared with the similar simulation study done on the 3-D oolitic limestone specimen. In both cases diffusion was found to be anomalous indicating that the sedimentary rock has a fractal geometry. The favourable comparability of results between the simulated and real rock supports the usefulness of the model of sedimentary rock generation which can be applicable to transport phenomena.
ISSN: 0956-540X

hal-00823061
https://hal.archives-ouvertes.fr/hal-00823061
DOI : 10.1093/gji/ggs084

Éditeur(s) : HAL CCSD Springer Verlag (Germany) Springer Verlag
Résumé : Direct numerical simulations of flow through two millimeter-scale rock samples of limestone and sandstone are performed using three diverse fluid dynamic simulators. The resulting steady-state velocity fields are compared in terms of the associated empirical probability density functions (PDFs) and key statistics of the velocity fields. The pore space geometry of each sample is imaged at 5.06−μm voxel size resolution using X-ray microtomography. The samples offer contrasting characteristics in terms of total connected porosity (about 0.31 for the limestone and 0.07 for the sandstone) and are typical of several applications in hydrogeology and petroleum engineering. The three-dimensional fluid velocity fields within the explicit pore spaces are simulated using ANSYS® FLUENT® ANSYS Inc. (2009), EULAG Prusa et al. (Comput. Fluids 37, 1193–1207 2008), and SSTOKES Sarkar et al. (2002). These computational approaches are highly disperse in terms of algorithmic complexity, differ in terms of their governing equations, the adopted numerical methodologies, the enforcement of internal no-slip boundary conditions at the fluid-solid interface, and the computational mesh structure. As metrics of comparison to probe in a statistical sense the internal similarities/differences across sample populations of velocities obtained through the computational systems, we consider (i) integral quantities, such as the Darcy flux and (ii) main statistical moments of local velocity distributions including local correlations between velocity fields. Comparison of simulation results indicates that mutually consistent estimates of the state of flow are obtained in the analyzed samples of natural pore spaces despite the considerable differences associated with the three computational approaches. We note that in the higher porosity limestone sample, the structures of the velocity fields obtained using ANSYS FLUENT and EULAG are more alike than either compared against the results obtained using SSTOKES. In the low-porosity sample, the structures of the velocity fields obtained by EULAG and SSTOKES are more similar than either is to the fields obtained using ANSYS FLUENT. With respect to macroscopic quantities, ANSYS FLUENT and SSTOKES provide similar results in terms of the average vertical velocity for both of the complex microscale geometries considered, while EULAG tends to render the largest velocity values. The influence of the pore space structure on fluid velocity field characteristics is also discussed.
ISSN: 1420-0597

hal-01174152
https://hal.archives-ouvertes.fr/hal-01174152
DOI : 10.1007/s10596-015-9486-7

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
A versatile sol-gel route has been developed for the preparation of hierarchical porous silica membrane material with highly dispersed platinum nanoparticles (Pt-NPs). The outstanding feature of the "one pot" synthesis developed in this work lies in the successful preparation of a stable complex suspension made of silica sol, multi-scale porogens and Pt nanoparticles. The multi-scale porogens were based on non-ionic triblock copolymers and aqueous latex suspension to create mesopores and macropores, respectively, with finely tuned pore size and organization. For further functionalization of the membranes, Pt nanoparticles of about 4 nm in diameter were prepared by irradiating with microwaves (MW) the Pt precursors added in the starting suspension. This original path is suggested to enable a pre-organization of Pt nanoparticles in the ordered mesoporous structure. The suspensions were then deposited as thin films on either dense or macroporous supports, and further thermally treated at 450°C to remove the porogen units. Hierarchical porous layers composed of micropores (<2 nm), ordered mesopores (∼4 nm) and macropores (∼70 nm) with or without Pt were prepared and characterized. The resulting membranes are foreseen to exhibit great potential as multifunctional membranes for gas separation coupled with catalytic reaction. © The Royal Society of Chemistry 2008.
ISSN: 0959-9428

hal-01680586
https://hal.univ-antilles.fr/hal-01680586
DOI : 10.1039/b807029f

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy P - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock, among which its transport properties are often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study, we performed multifractal analysis of pore distribution on simulated sedimentary rocks using the relaxed bidisperse ballistic deposition model (RBBDM). The RBBDM can generate a 3-D structure of sedimentary rocks of variable porosity by tuning the fraction p of particles of two different sizes. We also performed multifractal analysis on two samples of real sedimentary rock to compare with the simulation studies. One sample, an oolitic limestone is of high porosity (40 per cent) while the other is a reefal carbonate of low porosity, around 7 per cent. 2-D sections of X-ray microtomographs of the real rocks were stacked sequentially to reconstruct the real rock specimens. Both samples show multifractal character. The results from analysis of real rock agree quite well with the simulated structure of low porosity. The simulated rock of high porosity showed a weak multifractal nature though the real rock sample of similar porosity was found to be strongly multifractal. We propose a ‘structure parameter’ ξ which is a function of porosity and the generalized dimensions, and controls the transport properties of the rock.
ISSN: 0956-540X

hal-01174142
https://hal.archives-ouvertes.fr/hal-01174142
DOI : 10.1093/gji/ggu417

Éditeur(s) : HAL CCSD Oxford University Press (OUP): Policy B - Oxford Open Option A Oxford University Press (OUP)
Résumé : International audience
Peridotite xenoliths exhumed by Quaternary alkaline magmatism in the Tahalgha district, southern Hoggar, represent fragments of the subcontinental lithospheric mantle beneath the boundary between the two major structural domains of the Tuareg Shield: the ‘Polycyclic Central Hoggar’ to the east and the ‘Western Hoggar’, or ‘Pharusian Belt’, to the west. Samples were collected from volcanic centres located on both sides of a major lithospheric shear zone at 4°35' separating these two domains. Although showing substantial variations in their deformation microstructures, equilibrium temperatures and modal and chemical compositions, the studied samples do not display any systematic changes of these features across the 4°35' fault. The observed variations rather record small-scale heterogeneities distributed throughout the study area and reflecting the widespread occurrence of vein conduits and metasomatized wall-rocks related to trans-lithospheric melt circulation during the Cenozoic. These features include partial annealing of pre-existing deformation microstructures, post-deformation metasomatic reactions, and trace-element enrichment, coupled with heating from 750–900°C (low-temperature lherzolites) to 900–1150°C (intermediate-T lherzolites and high-T harzburgites and wehrlites). Trace-element modelling confirms that the range of rare earth element (REE) variations observed in the Tahalgha clinopyroxenes may be accounted for by reactive porous flow involving a single stage of basaltic melt infiltration into a light REE (LREE)-depleted protolith. Whole-rock compositions record the final entrapment of disequilibrium metasomatic melts upon thermal relaxation of the veins–wall-rock system. The striking correlations between equilibrium temperatures and trace-element enrichment favor a scenario in which the high-temperature peridotites record advective heat transport along melt conduits, whereas the intermediate- and low-temperature lherzolites reflect conductive heating of the host Mechanical Boundary Layer. This indicates that the lithosphere did not reach thermal equilibrium, suggesting that the inferred heating event was transient and was rapidly erased by thermal relaxation down to the relatively low-temperature present-day geotherm. The low-T (<900°C) deformed lherzolites (porphyroclastic to equigranular) are characterized by only incipient annealing and LREE-depleted clinopyroxene compositions. They were only weakly affected by the Cenozoic events and could represent relatively well-preserved samples from rejuvenated Pan-African lithosphere. Extensive lithospheric rejuvenation occurred either regionally during the Pan-African orogeny, as a result of lithospheric delamination or thermomechanical erosion after thickening, or more locally along the meridional shear zones. The low-T Tahalgha lherzolites are comparable with lherzolites from Etang de Lherz, southern France, interpreted as lithospheric mantle rejuvenated by melt-induced refertilization during a late stage of the Variscan orogeny.
ISSN: 0022-3530

hal-01107410
https://hal.archives-ouvertes.fr/hal-01107410
DOI : 10.1093/petrology/egu056

Éditeur(s) : HAL CCSD Royal Society of Chemistry
Résumé : International audience
Abstract View references (60)Here we show the long term performance at high temperatures of a multi-tube module containing 8 membranes in 4 parallel lines with a total of 545 cm 2 area. The membranes were prepared via thin film dip coating of cobalt oxide silica (CoO xSi) sol-gel on tubular alumina supports. A preliminary study found that the sol-gel containing 20 mol% cobalt oxide formed the best microporous structure with the highest surface area and pore volume. All resulting membranes delivered permeances of ∼1 × 10 -7 mol m -2 s -1 Pa -1 at 500 °C, indicating a high repeatability for the membrane fabrication process. The permselectivities of helium (He) and hydrogen (H 2) over carbon dioxide (CO 2) and nitrogen (N 2) increased from 10-20 at 100 °C to values close to 1000 at 500 °C. Additionally, the apparent energies of activation (E act) for the smaller kinetic diameter gases He and H 2 at 12.2 and 19.5 kJ mol -1 were high and contrary to the negative values for larger gases N 2 and CO 2 at -1.8 and -7.4 kJ mol -1. These remarkable results were attributed to the molecular sieving mechanism of the microporous silica which was enhanced by the embedding of cobalt oxide into the matrix, delivering structural control with an average pore size of 3 Å. The E act for H 2 permeance was higher than that of He, indicating that the cobalt oxide played an important role in H 2 transport. Two membrane lines performed exceptionally well for binary gas mixture processing with H 2 purity reaching values close to 100% in the permeate stream for argon (Ar) concentrations of up to 80% in the retentate stream. A major finding here is that the binary gas selectivity was independent of temperature, contrary to the permselectivity observed for single gas permeance. Further, the H 2 flow rate was greatly affected by the concentration of Ar in the mixture, while the temperature dependency played only a marginal role. In particular, competitive adsorption in the percolative pathways containing pore constrictions or bottlenecks of the anisotropic CoO xSi matrix allowed Ar to impede H 2 diffusion. Finally, the CoO xSi membranes proved thermally stable and robust for 2000 h of testing for various thermal cycles up to 500 °C. © The Royal Society of Chemistry 2012.
Energy & Environmental Science

hal-01683199
https://hal.univ-antilles.fr/hal-01683199
DOI : 10.1039/c2ee03247c

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We performed torsional deformation experiments on pre-hydrated fine-grained olivine aggregates using an innovative experimental assembly to investigate water weakening in mantle rocks at high shear strains. San Carlos olivine powder was cold-pressed and then hot-pressed under hydrous conditions, producing aggregates with average grain sizes of 7 or 15 μm. Deformation experiments were performed in a high-resolution gas-medium apparatus equipped with a torsional actuator, under a confining pressure of 300 MPa, a temperature of 1200 °C, and constant shear strain rates ranging from 8 × 10−5 to 1.4 × 10−4 s−1. Maximum shear stresses range from 150 to 195 MPa. These values are 30% lower relative to those determined in previous torsion experiments on dry, fined-grained dunites under similar conditions. Textures and microstructures of the starting and deformed specimens were characterized by scanning and transmission electron microscopy. All deformed aggregates exhibit a shape-preferred orientation marking a foliation and lineation, as well as a reduction in mean grain size from 15 μm down to 3-4 μm due to dynamic recrystallization. Olivine crystallographic fabrics developed rapidly (γ < 0.1), but their strength, characterized by the J-index, is low compared to naturally deformed peridotites or to polycrystalline olivine deformed at similar finite shear strains under dry conditions. The crystallographic fabrics are consistent with deformation by a dislocation accommodated creep mechanism with activation of multiple {0 k l}[1 0 0] systems, among which the (0 1 0)[1 0 0] slip system is dominant, and minor participation of the (0 1 0)[0 0 1] slip system. Transmission electron microscopy confirmed the occurrence of dislocations with [1 0 0] and [0 0 1] Burgers vectors in most grains. Analysis of unpolarized infrared spectra indicates that hydrogen concentration in the olivine lattice is below the saturation level of 18 ppm wt H2O, which is similar to those typically observed in spinel-bearing peridotite xenoliths, and also provide evidence for water-rich inter-granular material trapped in pores and grain boundaries. Seismic properties computed from the CPO observations correspond to those most commonly observed in naturally deformed mantle peridotites with fast P-wave propagation and S-wave polarization subparallel to the shear direction. These torsion experiments on fine-grained olivine polycrystals under hydrous conditions indicate that water weakening under lithospheric conditions is linked to various defects with hydrogen in the olivine structure, as well as with water-derived species in grain boundaries or pores.
ISSN: 0031-9201

hal-00745170
https://hal.archives-ouvertes.fr/hal-00745170
DOI : 10.1016/j.pepi.2012.05.001

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Several studies, both theoretical and experimental, show that sedimentary rocks have fractal pore-grain interface. The real rocks are 3-d structures with highly tortuous and often fractal pore spaces. Before attempting simulation of this daunting geometry, we present here, as a preliminary study, a simpler 2-d version. In this paper, a computer simulated 2-d sedimentary rock structure is generated by the relaxed bidisperse ballistic deposition model. Grains of two different sizes are dropped ballistically on a linear substrate. By changing the fraction of the two types of particles, the porosity of the rock structure can be tuned. The structure undergoes compaction through the relaxation of possible unstable overhangs. The micro structure of the pore space is investigated. The pore mass and the rock-pore interface show a fractal behaviour with the same fractal dimension indicating that the pore volume is a fractal. Our simulation results indicate that the process of compaction of grains during the deposition process seems to erase the dependency of the fractal dimension on the grain size distribution. The two point density correlation is measured for the pore space. It shows anisotropy which is an outcome of the growth rule. X-ray tomography of two-dimensional sections of real sedimentary rocks obtained from Mallorca Island is subjected to the same study and the results compared with those obtained from simulation. The simulation results agree qualitatively with the real rock sample. We also study diffusion on the pore space. Diffusion is found to be anomalous as is expected in fractal spaces. It also bears the signature of anisotropy of the structure. Diffusion studies on the real rock sample could not yield conclusive results as the system size is not large enough.
ISSN: 0926-9851

hal-00761818
https://hal.archives-ouvertes.fr/hal-00761818
DOI : 10.1016/j.jappgeo.2012.09.002

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (lambda(fract)) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of lambda(fract), are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetiy) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. (C) 2011 Elsevier B.V. All rights reserved.
ISSN: 0012-821X

hal-00745640
https://hal.archives-ouvertes.fr/hal-00745640
DOI : 10.1016/j.epsl.2011.10.029

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The interplay between fault zone cataclasis and cementation is important since both processes can drastically reduce the permeability of faults in porous sandstones. Yet the prediction of fault cementation in high-porosity sandstone reservoirs remains elusive. Nevertheless, this process has rarely been investigated in shallowly buried faults (<2 km; T°<80 °C) where its sealing capacity could be acquired early in the geological history of a reservoir. In this paper, the macro- and microscopic analysis of a fault zone in the porous Cenomanian quartz arenite sands of Provence (France) shows that silica diagenesis occurs in the most intensely-deformed cataclastic parts of the fault zone. This fault zone shows 19–48% of its total thickness occupied by low-porosity quartz-cemented cataclastic shear bands whose porosities range from 0 – ca. 5%. The analysis of the weathering profile around the fault zone reveals the presence of groundwater silcretes in the form of tabular, tightly silicified concretions cross-cut by the fault. Detailed transmitted light, cold-cathodoluminescence and scanning electron microscopy analyses of the silica cements (from the fault and the silcrete) reveal that all the silica cements originate from groundwater diagenetic processes. This study therefore shows that silica cementation can occur specifically in fault zones and as groundwater silcrete in the shallow context of a groundwater system, generated at the vicinity of an erosional unconformity.
ISSN: 0191-8141

hal-01278286
https://hal.archives-ouvertes.fr/hal-01278286
DOI : 10.1016/j.jsg.2015.10.001

Éditeur(s) : HAL CCSD
Résumé : Geological storage of CO2 is one of diverse technologies being explored to reduce atmospheric carbon fromindustrial processes (i.e. fossil fuel combustion). One of the specific features of CO2 injection is the possibility ofgeochemical reactions (dissolution – precipitation) between mobile reactive brine (e.g. formation water enrichedin CO2) and the host rock during the spatial and temporal evolution of CO2. That leads to modifications in thepore structure, which in turn change the flow dynamics of the reservoir (e.g. the permeability k). Then, thesesstructural modifications can largely control the injectivity, so that the pressure field in the reservoir and also theCO2 propagation. Accordingly, it is crucial to explore the changes in the reservoir properties (e.g. structural andhydrodynamic) induced during a CO2 injection and specially the relationships between them (e.g. k or reactivesurface-Sr versus porosity-φ , k versus rock heterogeneity), for developing predictive modelling tools of thetransport and reaction processes occurring during a CO2 injection and reliable risk assessment. In the case ofcarbonate rocks, the application of the predictive models of transport and reaction is still challenging, because oftheir high heterogeneity so that the incertitude in the reaction kinetics of carbonate minerals.From this perspective, we realized brine-enriched in CO2 percolation experiments through carbonate rocksamples in thermodynamic conditions expected during CO2 injection in deep reservoirs (T = 100°C et P =12MPa). The permeability changes k(t) is monitored during the experiments and the porosity variationφ (t) iscalculated from chemical analyses of the sampled outlet fluids, using ICP-EAS. The pore structure modificationsare investigated from high resolution X ray micro tomography images acquired from the synchrotron ofGrenoble (ESRF). Depending to the dissolution regime, controlled by the reservoir rock fabric and the chemicalcomposition of the brine (e.g. PCO2), we observed that a modification of pore structure can either improve(atypical result in dissolution context) or impair the value of the permeability k.
Le stockage géologique du CO2 est l’une des diverses technologies étant explorées afin deréduire les émissions de carbone atmosphérique des processus industriels (i.e. combustion del’énergie fossile). L’une des spécifiques caractéristiques de l’injection du CO2 en profondeurreste la possibilité de réactions géochimiques (dissolution-précipitation) entre la saumureréactive mobile (e.g. eau de formation enrichie en CO2) et la roche encaissante durantl’évolution spatiale et temporelle du CO2, conduisant à des modifications dans la structure despores et par conséquent dans les propriétés d’écoulement du réservoir (e.g. la perméabilité k).Donc, ces changements structuraux peuvent largement contrôler l’injectivité, ainsi que lechamp de pression dans le réservoir et aussi la propagation du CO2. Il demeure ainsi cruciald’explorer les changement dans les propriétés de réservoirs (e.g. structurales ethydrodynamiques) induits durant une injection de CO2 et explicitement les relations existantesentre eux (e.g. k ou surface réactive-Sr versus porosité-φ , k versus hétérogénéité de la roche),afin de développer des outils de modélisation prédictive des processus de transport etréactionnels se produisant durant une injection de CO2 et d’évaluer de façon fiable les risques.Dans le cas des réservoirs carbonatés, l’application des modèles prédictifs de transport réactifdemeure toujours un enjeu, car contrainte par la forte hétérogénéité en leur sein ainsi que parl’incertitude dans la cinétique de réactions des minéraux carbonatés dans ce contexte. Danscette optique, nous avons réalisé des expériences de percolation à travers des échantillons deroches carbonatées dans les conditions thermodynamiques de stockage en profondeur (T =100°C et P =12 MPa). L’évolution de la perméabilité k(t) est suivie au cours desexpériences ; et la variation de la porosité φ (t) est calculée à partir des résultats d’analyseschimiques au ICP-AES des fluides de sortie échantillonnés. L’investigation des modificationsapportées à la structure des pores est réalisée par le biais de la Micro-Tomographie hauterésolution à rayon X, acquise au synchrotron de Grenoble (e.g. ESRF).Dépendant du régime de dissolution, contrôlé par la fabrique de la roche réservoir et lacomposition chimique de la saumuré chargée en CO2 (e.g. PCO2 engagée), on a observéqu’une modification de la structure de la roche peut soit améliorer soit détériorer (résultatatypique en contexte de dissolution) la valeur de la perméabilité k.
https://hal.archives-ouvertes.fr/tel-01142136

tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136
https://hal.archives-ouvertes.fr/tel-01142136/document
https://hal.archives-ouvertes.fr/tel-01142136/file/thesemangane2013.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
In most rock mechanical testing devices, the texture developed during deformation is only observed after the failure, and the detailed mapping of cracks and pore structure evolution, just before or after rupture, remains speculative. Computerized X-ray tomography (CT X-ray) offers a way to observe 'in vivo' some characteristics of a tested sample in the course of its deformation. Therefore we developed an X-ray transparent tri-axial cell that was included in a medical purpose X-ray scanner with a volumetric resolution of the order of 1 mm3. This technique is described and applied to a porous calcarenite, which is regularly scanned for porosity evolution during mechanical testing. The experiment is performed at low confining pressure (2-10 MPa). During testing, an axial load is applied until failure and is then progressively decreased. In these experiments, the peak stress is preceded by phase of diffuse dilatancy. After failure localization, the axial stress is unloaded until the stress reaches isotropy. During this unloading phase, the previous diffuse dilatancy is lost due to an elastic relaxation. Then, the stress is completely relaxed. At this moment the dilatancy increases again and the residual dilatancy is larger than that reached at the peak stress. When observed "post mortem" at microscopic scale, the dilatant structures are comprised of cataclastic deformation bands and cracks in some larger crystals.
International Journal of Rock Mechanics and Mining Science

hal-00767563
https://hal.archives-ouvertes.fr/hal-00767563
DOI : 10.1016/j.ijrmms.2012.07.020

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
On the New Jersey shelf (offshore North America), the presence of pore water fresher than seawater is known from a series of boreholes completed during the 1970s and 1980s. To account for this fresh water, a fi rst hypothesis involves possible present-day active dynamic connections with onshore aquifers, while a second involves meteoritic and/or sub- ice-sheet waters during periods of lowered sea level. Expedition 313 drilled three boreholes on the middle shelf, offering a unique opportunity for the internal structure of the siliciclastic system to be accessed, at scales ranging from the depositional matrix to the continental margin. This enables the stratigraphic architecture to be correlated with the spatial distribution and salinity of saturating fl uids. Expedition 313 revealed both very low salinities (<3 g/L) at depths exceeding 400 m below the seafl oor and evidence for a multilayered reservoir organization, with freshand/ or brackish-water intervals alternating vertically with salty intervals. In this study we present a revised distribution of the salinity beneath the middle shelf. Our observations suggest that the processes controlling salinity are strongly infl uenced by lithology, porosity, and permeability. Saltier pore waters generally occur in coarse-grained intervals and fresher pore waters occur in fi ne-grained intervals. The transition from fresher to saltier intervals is often marked by cemented horizons that probably act as permeability barriers. In the lowermost parts of two holes, the salinity varies independently of lithology, suggesting different mechanisms and/or sources of salinity. We present an interpretation of the sedimentary facies distribution, derived from core, logs, and seismic profi le analyses, that is used to discuss the marginscale two-dimensional reservoir geometry and permeability distribution. These proposed geometries are of primary importance when considering the possible pathways and emplacement mechanisms for the fresh and salty water below the New Jersey shelf.
EISSN: 1553-040X

insu-00858241
https://hal-insu.archives-ouvertes.fr/insu-00858241
DOI : 10.1130/GES00855.1

Éditeur(s) : Elsevier
Résumé : We report on a multidisciplinary study of cold seeps explored in the Central Nile deep-sea fan of the Egyptian margin. Our approach combines in situ seafloor observation, geophysics, sedimentological data, measurement of bottom-water methane anomalies, pore-water and sediment geochemistry, and Th-230/U dating of authigenic carbonates. Two areas were investigated, which correspond to different sedimentary provinces. The lower slope, at similar to 2100 m water depth, indicates deformation of sediments by gravitational processes, exhibiting slope-parallel elongated ridges and seafloor depressions. In contrast, the middle slope, at similar to 1650 m water depth, exhibits a series of debris-flow deposits not remobilized by post-depositional gravity processes. Significant differences exist between fluid-escape structures from the two studied areas. At the lower slope, methane anomalies were detected in bottom-waters above the depressions, whereas the adjacent ridges show a frequent coverage of fractured carbonate pavements associated with chemosynthetic vent communities. Carbonate U/Th age dates (similar to 8 kyr BP), pore-water sulphate and solid phase sediment data suggest that seepage activity at those carbonate ridges has decreased over the recent past. In contrast, large (similar to 1 km(2)) carbonate-paved areas were discovered in the middle slope, with U/Th isotope evidence for ongoing carbonate precipitation during the Late Holocene (since similar to 5 kyr BP at least). Our results suggest that fluid venting is closely related to sediment deformation in the Central Nile margin. It is proposed that slope instability leads to focused fluid flow in the lower slope and exposure of 'fossil' carbonate ridges, whereas pervasive diffuse flow prevails at the unfailed middle slope.
Marine Geology (0025-3227) (Elsevier), 2009-06 , Vol. 261 , N. 1-4 , P. 92-104

Droits : 2009 Elsevier B.V. All rights reserved.
http://archimer.ifremer.fr/doc/2009/publication-6586.pdf
DOI:10.1016/j.margeo.2008.10.008
http://archimer.ifremer.fr/doc/00000/6586/

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Porous thin films considered for applications like separation, sensing and microelectronic have to sustain mechanical stresses during their integration process or in working conditions. Thanks to recent progress in processing methods, it is now possible to precisely control the porosity and combine ordered mesopores with randomly-distributed macropores to achieve hierarchically porous materials. The mechanical properties of thin films containing different types of porosity (ordered meso, random macro and hierarchical) have been investigated by means of nanoindentation. In particular a method recently proposed by Li and Vlassak (H. Li, J.J. Vlassak, Journal of Materials Research 24 (2009) 1114-1126) is applied to account for the substrate effect. Residual indent impressions were imaged by Atomic Force Microscopy (AFM) to provide some insights in the mechanical behavior of the films. In addition, experimental indentation moduli are compared to theoretical predictions obtained via Finite Element (FE) analysis. The different porous structures have been modeled by FE to obtain the effective elastic properties from which the indentation modulus can be inferred. Finally, the experimental-model differences are discussed. © 2010 Elsevier Inc. All rights reserved.
ISSN: 1387-1811

hal-01683194
https://hal.univ-antilles.fr/hal-01683194
DOI : 10.1016/j.micromeso.2010.09.004

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
A reactive percolation experiment was conducted by injecting seawater into a permeable olivine aggregate at 190 °C and 19 MPa to explore the relationships between hydration reactions and hydrodynamic properties during the onset of serpentinization in the ultramafic lithosphere exposed at mid-ocean ridges. The experiment was stopped after 23 days when the sample became impermeable. The initial flow rate was 0.2 mL/h and then was decreased down to 0.06 mL/h after 8 days. Permeability decreased continuously throughout the experiment. The analyses of fluid chemistry time series and of the mineralogy and structure of the reacted sample showed olivine dissolution and precipitation of proto-serpentine, brucite and Fe-oxides. These reactions are controlled by coupled hydrodynamic and chemical processes interacting at different time and spatial scales. Their first characteristic is the production of silica rich outlet fluids in disequilibrium with the observed reacted mineral assemblages. These compositions are interpreted as resulting from a suite of coupled dissolution-precipitation reactions, controlled at the pore scale by surface kinetic processes, that rapidly reaches steady-state (constant fluid composition independent of fluid flux). Hence, the effective rate of serpentinization was controlled, to the first order, by the transport of reactants during the experiment. Mass balance calculations show that the rate of olivine conversion was fast (0.2-0.5 wt%/day), yet only ∼8 wt% of the olivine sample reacted, because the permeability drop limited fluid circulation. Porosity varied little during the experiment compared to permeability changes: the decrease of permeability was explained by the structure of the newly formed serpentine favouring the clogging of fluid paths. The rate at which permeability decreased was the fastest at low flux conditions. This suggests that permeability changes were not controlled simply by the kinetics of the serpentinization reactions, but mainly reflected the development of low Peclet pore scale zones forming micro-environments that control the serpentinization reaction-paths. These results outline the need to take into account the coupling of hydrodynamic and chemical processes when modelling the effects of reactive transport within the hydrating oceanic lithosphere.
ISSN: 0012-821X

hal-00855043
https://hal.archives-ouvertes.fr/hal-00855043
DOI : 10.1016/j.epsl.2013.03.052

Éditeur(s) : HAL CCSD American Association of Petroleum Geologists
Résumé : In reservoir engineering, hydrodynamic properties can be estimated from downhole electrical data using heuristic models (e.g., Archie and Kozeny-Carman's equations) relating electrical conductivity to porosity and permeability. Although proven to be predictive for many sandstone reservoirs, the models mostly fail when applied to carbonate reservoirs that generally display extremely complex pore network structures. In this article, we investigate the control of the three-dimensional (3-D) geometry and morphology of the pore network on the electrical and flow properties, comparing core-scale laboratory measurements and 3-D x-ray microtomography image analysis of samples from a Miocene reefal carbonate platform located in Mallorca (Spain). The results show that micrometer- to centimeter-scale heterogeneities strongly influence the measured macroscopic physical parameters that are then used to evaluate the hydrodynamic properties of the rock, and therefore, existing models might not provide accurate descriptions because these heterogeneities occur at scales smaller than those of the integration volume of the borehole geophysical methods. However, associated with specific data processing, 3-D imagery techniques are a useful and probably unique mean to characterize the rock heterogeneity and, thus, the properties variability.
ISSN: 0149-1423

hal-00950066
https://hal.archives-ouvertes.fr/hal-00950066
DOI : 10.1306/05221312134

Éditeur(s) : HAL CCSD Elsevier
Résumé : The Erro-Tobbio peridotites (Voltri Massif, Ligurian Alps) represent subcontinental lithospheric mantle tectonically exhumed during Permo-Mesozoic extension of the Europe-Adria lithosphere. Previous studies have shown that exhumation started during Permian times, and occurred along kilometer-scale lithospheric shear zones which enhanced progressive deformation and recrystallization from spinel- to plagioclase-facies conditions. Ongoing field and petrologic investigations have revealed that the peridotites experienced, during uplift, a composite history of diffuse melt migration and multiple episodes of ultramafic-mafic intrusions. In this paper we present the results of field, structural and petrologic-geochemical investigations into a sector of the Erro-Tobbio peridotite unit that preserves well this multiple intrusion history. Melt impregnation in the peridotites is evidenced by significant plagioclase enrichment and crystallization of unstrained orthopyroxene replacing kinked mantle olivine and clinopyroxene; impregnating melts were thus opx-saturated. Melt-rock interaction caused chemical changes in mantle minerals (e.g. Al decrease and REE increase in cpx; Ti and Cr# enrichment in spinel). Nevertheless, clinopyroxenes still exhibit LREE depletion (Ce;N;/Sm;N; = 0.006-0.011), indicating a depleted signature for the percolating melts. Melt impregnation was thus related to diffuse porous flow migration of depleted MORB-type melt fractions that modified their compositions towards opx saturation by mantle-melt interaction during ascent. The impregnated peridotites are intruded by a hectometer-scale stratified cumulate body, mostly consisting of troctolites and plagioclase wehrlites, showing gradational, interfingered contacts with the host mantle rocks. Subsequent intrusion events are revealed by the occurrence of olivine gabbros as decameter-wide lenses, variably thick (centimeter- to meter-scale) dykes and thin dykelets, which crosscut both the peridotite foliation and the magmatic layering in the cumulates. Overall, major and trace element compositions of minerals in the intrusives indicate that they represent variably differentiated cumulus products crystallized from rather primitive N-MORB-type aggregated melts. Slightly more evolved compositions are shown by olivine gabbros, relative to the troctolites and plagioclase wehrlites of the cumulate body. Mineral chemistry features (e.g. the Fo-An correlation and high Na, Ti, Mg# in cpx) indicate that the studied intrusive rocks crystallized at moderate pressure conditions (3-5 kbar, i.e. 9-15 km depth). Our study thus points to a progressive transition from porous flow melt migration to emplacement of magmas in fractures, presumably related to progressive change of lithospheric mantle rheology during extension-related uplift and cooling.
ISSN: 0024-4937

hal-00407669
https://hal.archives-ouvertes.fr/hal-00407669
DOI : 10.1016/j.lithos.2006.06.014

Éditeur(s) : HAL CCSD Oxford University Press (OUP)
Résumé : International audience
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called G-layer, in the fibre wall. The structure of G-layer has been recently described as a hydrogel thanks to N2 adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2 to 50 nm). This led us to revisit the concept of G-layer that was until now only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with typical thick G-layer while it is much less with thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without G-layer is as low as in normal wood. Not depending on the amount of pores, the pore sizes distribution are always centred around 6-12 nm. These results suggest that, among species producing fibres with G-layer, large structural differences of G-layer exist between species
ISSN: 0022-0957

hal-00387861
https://hal.archives-ouvertes.fr/hal-00387861
DOI : 10.1093/jxp/erp133

Éditeur(s) : Gauthier-Villars
Résumé : We report here our findings on the chemistry of methane, manganese and chloride dissolved in the interstitial water of the Barbados accretionary complex. The decollement separating the subduction plate from the accretionary wedge is geochemically characterized by high methane and manganese and low chloride concentrations relative to buried seawater. Sandstone layers occurring below the decollement and the compressive structures recording some of the earliest effects of offscraping are also characterized by similar anomalies. A fluid with the same characteristics is also found six kilometres to the east of the deformation front within the oceanic plate. High manganese concentration and low chlorinity also occur in the pore water of the offscraped sediment packages, but without associated anomalous methane concentrations. These results suggest that: Dewatering processes occur below the decollement in association with thermogenic methane production; Fluid with low chlorinity and high methane concentrations circulates mainly along the decollement, its propagation in the oceanic domain and along the main fracture zones being associated with these detachment surfaces; Diagenetic processes essentially control the dissolved manganese concentration and probably affect the methane content of the interstitial waters; The observations made in this paper illustrate advective processes in the front of an accretionary prism.
Oceanologica Acta (0399-1784) (Gauthier-Villars), 1991 , Vol. 14 , N. 1 , P. 33-49

Droits : info:eu-repo/semantics/openAccess
http://archimer.ifremer.fr/doc/00101/21262/18873.pdf
http://archimer.ifremer.fr/doc/00101/21262/