Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The nucleation, propagation, and associated folding of ramp-flat-ramp normal faults were analyzed from field examples developed in a brittle/ductile multilayer sequence of the Huércal-Overa Basin (SE Spain). Gently dipping sandy silt layers, which display a low cohesive strength (C0 = 7 kPa, μ = 34°), favor the development of extensional detachments. A tectonic origin instead of a possible gravitational origin is supported by the perpendicularity between the paleoslope direction of the fluvial-deltaic environment inferred from imbricated pebbles, and the senses of movement deduced from fault slicken-lines. The link between high-angle normal faults (HANFs) --formed at different levels in the layered sequence-- with horizontal fault segments comes to develop ramp-flat-ramp normal faults with associated roll-over in the hanging wall. Observed extensional duplexes are formed by parallel detachments connected through synthetic Riedel faults. These Riedel faults would produce the back-rotation of the individual blocks (horses), i.e., extensional folding of the originally subhorizontal layers. There is no correlation between the analyzed ramp-flat-ramp normal faults, accommodating south-southeastward extension during Serravallian-lower Tortonian, and either the regional Alpujarride/Nevado-Filabride west-directed extensional shear zone or the top-to-the-north detachments within Alpujarride units, which are clearly sealed by Serravallian-lower Tortonian sediments. Therefore, the studied normal faults are restricted to the brittle/ductile multilayer fluvio/deltaic sequence and accommodate moderate late extension instead of belonging to a large crustal extensional system connected with a regional detachment at depth. Therefore, the basin formed in a moderate crustal thickness context where small and medium-scale extensional systems were subordinate structures. These natural examples support the development of low-angle normal faults at very shallow crustal levels in multilayer sequences with suitable rheological conditions.
ISSN: 0278-7407

hal-00750352
https://hal.archives-ouvertes.fr/hal-00750352
DOI : 10.1029/2012TC003130

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Mantle xenoliths in Pliocene alkali basalts of the eastern Betics (SE Iberia, Spain) are spinel ± plagioclase lherzolite, with minor harzburgite and wehrlite, displaying porphyroclastic or equigranular textures. Equigranular peridotites have olivine crystal preferred orientation (CPO) patterns similar to those of porphyroclastic xenoliths but slightly more dispersed. Olivine CPO shows [100]-fiber patterns characterized by strong alignment of [100]-axes subparallel to the stretching lineation and a girdle distribution of [010]-axes normal to it. This pattern is consistent with simple shear or transtensional deformation accommodated by dislocation creep. One xenolith provides evidence for synkinematic reactive percolation of subduction-related Si-rich melts/fluids that resulted in oriented crystallization of orthopyroxene. Despite a seemingly undeformed microstructure, the CPO in orthopyroxenite veins in composite xenoliths is identical to those of pyroxenes in the host peridotite, suggesting late-kinematic crystallization. Based on these observations, we propose that the annealing producing the equigranular microstructures was triggered by melt percolation in the shallow subcontinental lithospheric mantle coeval to the late Neogene formation of veins in composite xenoliths. Calculated seismic properties are characterized by fast propagation of P waves and polarization of fast S waves parallel to olivine [100]-axis (stretching lineation). These data are compatible with present-day seismic anisotropy observations in SE Iberia if the foliations in the lithospheric mantle are steeply dipping and lineations are subhorizontal with ENE strike, implying dominantly horizontal mantle flow in the ENE-WSW direction within vertical planes, that is, subparallel to the paleo-Iberian margin. The measured anisotropy could thus reflect a lithospheric fabric due to strike-slip deformation in the late Miocene in the context of WSW tearing of the subducted south Iberian margin lithosphere.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809
https://hal.archives-ouvertes.fr/hal-01685809/document
https://hal.archives-ouvertes.fr/hal-01685809/file/Hidas_et_al-2016-Tectonics.pdf
DOI : 10.1002/2016TC004165

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
Environmental magnetism of speleothems is still in its early stage of development. Here we report on our investigation of the environmental and paleomagnetic information that has been recorded in speleothems, and what are the factors that control its preservation and reliability. To address these issues, we used a multidisciplinary approach, including rock magnetism, petrography, scanning electron microscopy, stable carbon and oxygen isotope compositions, and major and trace element concentrations. We applied this to a set of samples from different stages of speleothem evolution: present-day dripwater (glass plates), a weathered stalactite, a fresh stalagmite, cave sediments, and terra rossa soils. These samples come from the Penico and Excentricas caves, located in two distinct aquifers of the Algarve region, South Portugal. Our results show that the main magnetic carriers of the speleothems under study are primary (detrital) and consist of maghemite (and magnetite?). Similarities in coercivity and temperature dependence of the studied set of samples suggest that iron oxides are inherited from the terra rossa soils that cap the cave and were transported to the speleothems by dripwater. Hence, they represent a regional environmental signature. Interestingly, a stable and probably detrital remanent magnetization could be isolated in the fresh stalagmite, whereas the weathered stalactite yielded chaotic magnetic directions and very low remanent intensities. We propose that these low intensities can be the result from (i) different remanence acquisition mechanisms between stalagmite and stalactite and/or (ii) iron dissolution by fungal activity. We also suggest that magnetic properties and color and the content in detrital elements in the fresh speleothem inform about environmental processes acting on the interface of rock (soil)-atmosphere, while oxygen isotope composition and alkaline-earth element concentrations inform about calcite-water interaction processes. These results provide a better understanding of how environmental information is recorded in speleothems and what the factors are that control the reliability of the paleomagnetic and paleo-environmental signal.
ISSN: 0148-0227

hal-01114953
https://hal.archives-ouvertes.fr/hal-01114953
DOI : 10.1002/2014JB011381

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The objective of this study was to realize a three-dimensional (3-D) geological model of the deep basin structure of the Middle Durance region (of folds and faults) by integration of geological and geophysical data, and to evaluate its fault geometry and tectonic history. All of the available geophysical and geological data were compiled in three dimensions using the gOcad geomodeler. The geological and geophysical data were used to build a 3-D geological model of the Middle Durance region. The data on the 3-D geometry of fault surfaces and stratigraphic horizons and the thickness maps of the main stratigraphic units are supported by the 3-D geological model. We show that the Middle Durance Fault cannot be interpreted as a single fault plane that affected the entire Meso-Cenozoic sedimentary layers and the Paleozoic basement but as a listric segmented faulting system in sedimentary layers, rooted in Triassic evaporites and a normal block faulting system in the basement. This decoupling level in the Triassic layers reveals thin-skin deformation, formed by strong mechanical decoupling between the Mesozoic sedimentary cover and the Paleozoic basement. This study also confirms that the Provence geological structure has resulted mainly from Pyrenean deformation, which was partly reactivated by Alpine deformation. We demonstrate that the Middle Durance Fault Zone is a transfer fault that accommodates deformation of the sedimentary filling of the South-East Basin through modified fold geometry over a zone of 7 km to 8 km around the main segment of the fault zone.
ISSN: 0278-7407

hal-01172221
https://hal.archives-ouvertes.fr/hal-01172221
DOI : 10.1002/2014TC003749

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The Calabro-Peloritan belt constitutes the eastward termination of the southern segment of the Alpine Mediterranean belt. This orogenic system was built up during the convergence between the Eurasian and the African plates, roughly directed North-South since the Upper Cretaceous. It was subsequently fragmented during the opening of the Western Mediterranean basins since Oligocene times. The curved shape of the Calabro-Peloritan belt was acquired during the opening of the Tyrrhenian basin since Tortonian. The origin, kinematics and significance of the Calabro-Peloritan tectonic pile are still debated. Our data in the Aspromonte Massif of Southern Calabria reveal an Alpine history marked by two main superimposed kinematic regimes. (i) A first phase corresponds to the piling up of basement nappes with a top-to-the-SE vergence, i.e in a direction orthogonal to the belt trend and towards the Adriatic foreland. This external vergence is similar to what is observed in both Northeastern Sicily and Northern Calabria. In Sicily, the age of nappe piling is Alpine, as evidenced by pinched slices of Mesozoïc sediments. In the Aspromonte Massif, thrusting age is less constrained. Our data suggest remnants of late Hercynian structuration before the Alpine stacking. (ii) A second phase corresponds to the thinning of the continental crust, dated at around 30 Ma by both geochronological and stratigraphical data. This extension is mainly localized on two low-angle detachment contacts, with top-to-the-NE displacement. The lower one corresponds to the reworking of the former main nappe contact. The upper one is a large detachment fault cutting across the pile from upper sedimentary levels down to metamorphic basement. Extension of similar Alpine age and similar internal vergence has been already recognized in other parts of the Calabro-Peloritan Arc: in the basement nappes of Northeastern Sicily and in the ophiolitic units of Northern Calabria. Coming back to the original geometry and position of the Calabro-Peloritan belt, before its bending and the opening of the Liguro-Provençal and Tyrrhenian basins, we evidence a homogeneous Oligocene NE-SW extension all along the Calabro-Peloritan segment of the Alpine Mediterranean belt. This tectonometamorphic history is best explained within the framework of the continuous Tertiary westward dipping subduction of the Tethyan oceanic domain below the European active margin and the progressive eastward retreat of the Apennine trench since Oligocene times.
ISSN: 0278-7407

hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182
https://hal.archives-ouvertes.fr/hal-00283182/document
https://hal.archives-ouvertes.fr/hal-00283182/file/Heymes_et_al_2008.pdf
DOI : 10.1029/2007TC002157

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Extensional fault systems in the Earth's crust can exhibit two end-member geometries that we identify as distributed and localized faulting regimes. A satellite image analysis of fault populations from the Main Ethiopian Rift-Afar area reveals that the rift architecture contains these two faulting regimes. The occurrence of these regimes reveals a jump in the scale of fault segmentation and linkage. Strain localization at rift border zones exhibits particularly large-scale fault linkage and a power law size distribution. This regime replaces prior distributed fault systems, showing small-scale fault linkage and an exponential size distribution. The distributed faulting is interpreted as confined to the thick trap basalt carapace. We show that continental fault systems can develop by a combination of these two geometries, and we demonstrate how to quantitatively decipher the jump between them.
ISSN: 0278-7407

hal-00411147
https://hal.archives-ouvertes.fr/hal-00411147
DOI : 10.1029/2007TC002148

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Nowadays, technological advances in satellite imagery measurements as well as the development of dense geodetic and seismologic networks allow for a detailed analysis of surface deformation associated with active fault seismic cycle. However, the study of earthquake dynamics faces several limiting factors related to the difficulty to access the deep source of earthquake and to integrate the characteristic time scales of deformation processes that extend from seconds to thousands of years. To overcome part of these limitations and better constrain the role and couplings between kinematic and mechanical parameters, we have developed a new experimental approach allowing for the simulation of strike-slip fault earthquakes and analyze in detail hundreds of successive seismic cycle. Model rheology is made of multilayered visco-elasto-plastic analog materials to account for the mechanical behavior of the upper and lower crust and to allow simulating brittle/ductile coupling, postseismic deformation phase and far-field stress transfers. The kinematic evolution of the model surface is monitored using an optical system, based on subpixel spectral correlation of high-resolution digital images. First, results show that the model succeed in reproducing the deformation mechanisms and surface kinematics associated to the main phases of the seismic cycle indicating that model scaling is satisfactory. These results are comforted by using numerical algorithms to study the strain and stress distribution at the surface and at depth, along the fault plane. Our analog modeling approach appears, then, as an efficient complementary approach to investigate earthquake dynamics.
ISSN: 0278-7407

hal-01174176
https://hal.archives-ouvertes.fr/hal-01174176
DOI : 10.1002/2014TC003701

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
New structural observations coupled with 15 U/Pb and 24 Ar/Ar new ages from the Karakorum shear zone (KSZ) constrain the timing and slip rate of the right-lateral Karakorum fault zone (KFZ), one of the great continental Asian strike-slip faults. In the Tangtse-Darbuk area, the Tangtse (SW) and Muglib (NE) mylonitic strands of the KSZ frame the less deformed Pangong Range. Inherited U/Pb ages show that granitic protoliths are mostly from the Karakorum and Ladakh batoliths, with a major Miocene melting event lasting from ≥21.5 to 13.5 Ma. Some of the Miocene granitic bodies show structural evidence for intrusion synkinematic to the KSZ. The oldest of these granitoids is 18.8 ± 0.4 Ma old, implying that deformation started prior to ∼19 Ma. Microstructural data show that right-lateral deformation pursued during cooling. Ar/Ar data show that ductile deformation stopped earlier in the Tangtse (∼11 Ma) than in the Muglib strand (∼7 Ma). Deformation ended at ∼11 Ma in the Tangtse strand while it is still active in the Muglib strand, suggesting a progressive localization of deformation. When merged with published observations along the KFZ, these data suggest that the KFZ nucleated in the North Ayilari range at least ∼22 Ma ago. The long-term fault rate is 0.84 to 1.3 cm/yr, considering a total offset of 200 to 240 km. The KSZ collected magma produced within the shear zone and/or deeper in crust for which the producing mechanism stays unclear but was not the lower crustal channel flow.
ISSN: 0278-7407

hal-00745066
https://hal.archives-ouvertes.fr/hal-00745066
DOI : 10.1029/2011TC003049

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Microstructures and crystallographic preferred orientation (CPO) of anorthosite samples interlayered in the upper and lower gabbro sections in the Oman ophiolite were analyzed in this paper. In the anorthosites registering the dynamics of the melt lenses, foliation is flat lying and starts to develop a few meters below the root zone of the sheeted dike complex (RZSDC). Microstructures and CPO of these rocks were developed in response to four different mechanisms: (1) density-controlled settling of plagioclase on the lens floor, (2) deposition of anorthosites related to convection currents, (3) melt compaction, and (4) uncompacted melt accumulation. In these anorthosites, the poles to (010) of plagioclase are parallel to the flow plane of convection, whereas the [100] axes and poles to (001) express the convection flow direction and the axis of convection rolls, respectively. The effect of subsidence of melt lens floor is recorded immediately below the RZSDC and is characterized by the rapid (but progressive) development of dipping foliation and lineation, reflecting the increase of deformation downsection. The degree of foliation and CPO development in the anorthosites is directly related to the distance of the center of the melt lenses before the subsidence starts. Despite the uncertain origin of the anorthosites from the lower gabbro section, all the samples lost the magmatic microstructural characteristics and presently are reequilibrated aggregates. However, they still preserve plagioclase CPO, where some of these patterns present similarities with the anorthosites from the upper gabbro section, but no evidence of intracrystalline deformation under high temperatures.
ISSN: 0278-7407

hal-00617446
https://hal.archives-ouvertes.fr/hal-00617446
DOI : 10.1029/2010TC002697

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
[1] The Pyrenees, north of the North Pyrenean fault, display a complex structure involving a succession of peridotite massifs, basement massifs, and mid-Cretaceous to Late Cretaceous basins located in a narrow domain, which was affected by a mid-Cretaceous, preorogenic, high-temperature, low-pressure metamorphism. The Late Cretaceous basins were interpreted either as pull-apart basins formed during transcurrent motion of Iberia relative to Eurasia or as remnants of a larger extensional basin. Recent models support that peridotite massifs result from the exhumation of the mantle during this preorogenic event. The northern boundary of the Agly basement massif shows evidence of ductile deformation of the basal formations of the Agly sedimentary cover. Macroscopic and microscopic kinematics indicators consistent with asymmetry of crystallographic fabrics suggest normal sense of shear and thus suggest detachment, at least partial, of the Mesozoic cover from its basement. Triassic to Early Cretaceous limestones are mylonitic and consistently shows a foliation, a NS- to NE-trending lineation, shear criteria suggesting top-to-the-north shearing and locally boudinage. At the microscopic scale, mylonites are characterized by a very fine grain size, frequently <10 µm. They contain larger, partially recrystallized calcite parent grains and undeformed quartz grains with calcite fringes crystallized in pressure shadows. In these mylonites, calcite systematically shows a weak but well-defined crystallographic-preferred orientations, suggesting HT dislocation creep combined to diffusion creep and possibly grain boundary sliding in the finest fraction of the mylonites. Paleotemperatures determined using Raman spectrometry suggest synkinematic temperature conditions in the range 340-390°C, in good agreement with observed microstructures and calcite CPO. The mylonitic fabric in Mesozoic limestones is folded by EW-trending Pyrenean folds north of the Agly basement massif, attesting that this fabric formed before the Pyrenean orogeny. These data consistently support preorogenic extension under medium-temperature conditions of the northern Agly massif and likely of the massif itself. Since simultaneously (~100 Ma) a mid-Cretaceous basin opened south of the basement massif, we suggest a model of preorogenic exhumation of the Agly massif in response to the regional extension associated to the rotation of Iberia. This model may explain the exhumation of the North Pyrenean massifs during a single preorogenic event that allowed the opening of extensional basins and the exhumation of the lithospheric mantle. All these structures being subsequently reworked during the Pyrenean orogeny.
ISSN: 0278-7407

hal-00852833
https://hal.archives-ouvertes.fr/hal-00852833
DOI : 10.1002/tect.20015

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
The present-day topography of the Tian Shan range is considered to result from crustal shortening related to the ongoing India-Asia collision that started in the early Tertiary. In this study we report evidence for several episodes of localized tectonic activity which occurred prior to that major orogenic event. Apatite fission track analysis and (U-Th)/He dating on apatite and zircon indicate that inherited Paleozoic structures were reactivated in the late Paleozoic-early Mesozoic during a Cimmerian orogenic episode and also in the Late Cretaceous-Paleogene (around 65-60 Ma). These reactivations could have resulted from the accretion of the Kohistan-Dras arc or lithospheric extension in the Siberia-Mongolia zone. Activity resumed in the late Mesozoic prior to the major Tertiary orogenic phase. Finally, the ongoing deformation, which again reactivates inherited tectonic structures, tends to propagate inside the endoreic basins that were preserved in the range, leading to their progressive closure. This study demonstrates the importance of inherited structures in localizing the first increments of the deformation before it propagates into yet undeformed areas.
ISSN: 0278-7407

Droits : info:eu-repo/semantics/OpenAccess
hal-00551323
https://hal.archives-ouvertes.fr/hal-00551323
https://hal.archives-ouvertes.fr/hal-00551323/document
https://hal.archives-ouvertes.fr/hal-00551323/file/2010TC002712.pdf
DOI : 10.1029/2010TC002712

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
New estimates of trench migration rates allow us to address the dynamics of trench migration and back-arc strain. We show that trench migration is primarily controlled by the subducting plate velocity V-sub, which largely depends on its age at the trench. Using the hot and weak arc to back-arc region as a strain sensor, we define neutral arcs characterized by the absence of significant strain, meaning places where the forces (slab pull, bending, and anchoring) almost balance along the interface between the plates. We show that neutral subduction zones satisfy the kinematic relation between trench and subducting plate absolute motions: V-t = 0.5V(sub) - 2.3 (in cm a(-1)) in the HS3 reference frame. Deformation occurs when the velocity combination deviates from kinematic equilibrium. Balancing the torque components of the forces acting at the trench indicates that stiff (old) subducting plates facilitate trench advance by resisting bending.
ISSN: 0278-7407

hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731
https://hal.archives-ouvertes.fr/hal-00411731/document
https://hal.archives-ouvertes.fr/hal-00411731/file/Lallemand2008-Tectonics.pdf
DOI : 10.1029/2007TC002212

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Located east of Guadeloupe, the island of La Désirade exhibits the oldest rocks of the Lesser Antilles arc and the eastern Caribbean plate. An old magmatic basement is composed of (1) late Jurassic ophiolitic complex with meta-basaltic pillow lavas and interbedded radiolarites, (2) acid igneous complex comprising meta-quartz-diorite and meta-rhyolitic lavas flows, and (3) meta-diabasic/microdioritic dyke swarm complex. We present and discuss the discovery of synmetamorphic thrust tectonics in this island. Based on detailed structural analysis we evidenced two main compressive events. The first event (D1) is characterized by pervasive folding associated with thrust development. In the northeastern part of the island, a major thrust fault, the Grand Abaque Thrust, has been discovered which displaces for several kilometers the acid igneous complex onto the ophiolitic unit. The second deformation event (D2) is featured by a main pervasive cleavage S2 observed at the regional scale associated with upright folding (F2) and by the development of two sets of conjugated steeply dipping strike-slip shear zones, dextral 130°N and sinistral 20°N striking, respectively. Microstructural observations indicate that Greenschist facies metamorphism is clearly contemporaneous with the development of D1 and D2 superimposed tectonic structures. Ar/Ar geochronology was performed on two bulk of adularia minerals sampled in the northeast volcanic complex within a deformed zone related to a D2 event. These analyses yield well-defined and concordant plateau ages at 106.2 ± 1.7 Ma and 107.2 ± 1.8 Ma. Thus, shortening and thickening tectonics occurred during Lower Cretaceous (Albian). In the available framework of Caribbean geodynamics, the synmetamorphic thrust tectonics we discovered in the French Lesser Antilles is related to the collision between an Aptian-Albian oceanic plateau and the Andean-Cordilleran east-dipping subduction zone. Our results support subduction polarity reversal during Lower Cretaceous.
ISSN: 0278-7407

hal-00620555
https://hal.archives-ouvertes.fr/hal-00620555
DOI : 10.1029/2011TC002875

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We use lithospheric-scale analog models to study the reactivation of pre-existing heterogeneities under oblique shortening and its relation to the origin of arcuate orogens. Reactivation of inherited rheological heterogeneities is an important mechanism for localization of deformation in compressional settings and consequent initiation of contractional structures during orogenesis. However, the presence of an inherited heterogeneity in the lithosphere is in itself not sufficient for its reactivation once the continental lithosphere is shortened. The heterogeneity orientation is important in determining if reactivation occurs and to which extent. This study aims at giving insights on this process by means of analog experiments in which a linear lithospheric heterogeneity trends with various angles to the shortening direction. In particular, the key parameter investigated is the orientation (angle α) of a strong domain (SD) with respect to the shortening direction. Experimental results show that angles α ≥ 75° (high obliquity) allow for reactivation along the entire SD and the development of a linear orogen. For α ≤ 60° (low obliquity) the models are characterized by the development of an arcuate orogen, with the SD remaining partially non-reactivated. These results provide a new mechanism for the origin of some arcuate orogens, in which orocline formation was not driven by indentation or subduction processes, but by oblique shortening of inherited heterogeneities, as exemplified by the Ouachita orogen of the southern U.S.
ISSN: 0278-7407

insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544
https://hal-insu.archives-ouvertes.fr/insu-01498544/document
https://hal-insu.archives-ouvertes.fr/insu-01498544/file/Calignano_et_al-2017-Tectonics.pdf
DOI : 10.1002/2016TC004424

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
We decipher late-orogenic crustal flow characterized by feedback relations between partialmelting and deformation in the Variscan Montagne Noire gneiss dome. The dome shape and finite strainpattern of the Montagne Noire Axial Zone (MNAZ) result from the superimposition of three deformations(D1, D2 and D3). The early flat-lying S1 foliation is folded by D2 upright ENE-WSW folds and transposed in thecentral and southern part of the MNAZ into steep D2 high-strain zones consistent with D2 NW-SE horizontalshortening, in bulk contractional coaxial deformation regime that progressively evolved to noncoaxial dextraltranspression. The D2 event occurred under metamorphic conditions that culminated at 0.65 ± 0.05 GPa and 720± 20°C. Along the anatectic front S1 and S2 foliations are transposed into a flat-lying S3 foliation with top-to-NEand top-to-SW shearing in the NE and SW dome terminations, respectively. These structures define a D3 transitionzone related to vertical shortening during coaxial thinning with a preferential NE-SW to E-W directedstretching. Depending on structural level, the metamorphic conditions associated with D3 deformation rangefrom partial melting conditions in the dome core to subsolidus conditions above the D3 transition zone. Wesuggest that D2 and D3 deformation events were active at the same time and resulted from strain partitioningon both sides of the anatectic front that may correspond to a major rheological boundary within the crust.
ISSN: 0278-7407

hal-01208098
https://hal.archives-ouvertes.fr/hal-01208098

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
Sandbox experiments, using a two-dimensional and a three-dimensional approach, are used to study the deformation of margins in response to seamount subduction. Successive mechanisms of deformation are activated during the subduction of conical seamounts. First, reactivation of the frontal thrusts and compaction of the accretionary wedge is observed. Then, back thrusting and, conjugate strike-slip faulting develops above the leading slope of the subducted seamount. The basal d6collement is deflected upward in the wake of the subducting high, and a large shadow zone develops behind the seamount trailing slope. Consequently, frontal accretion is inhibited and part of the frontal margin is dragged into the subduction zone. When the main d6collement returns to its basal level in the wake of the seamount, the margin records a rapid subsidence and a new accretionary wedge develops, closing the margin reentrant. The sediments underthrusted in the wake of the seamount into the shadow zone, are underplated beneath the rear part of the accretionary wedge. Substantial shortening and thickening of the deformable seaward termination of the upper plate basement, associated with basal erosion is observed. Seamount subduction induces significant material transfer within the accretionary wedge, favors large tectonic erosion of the frontal margin and thickening of the rear part of the margin. The subduction and underplating of relatively undeformed, water-ladden sediments, associated with fluid expulsion along the fractures affecting the margin could modify the fluid pressure along the basal ddcollement. Consequently, significant variations of the effective basal friction and local mechanical coupling between the two plates could be expected around the subducting seamount.
ISSN: 0278-7407

hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523
https://hal.archives-ouvertes.fr/hal-01261523/document
https://hal.archives-ouvertes.fr/hal-01261523/file/Dominguez2000-Tectonics.pdf
DOI : 10.1029/1999TC900055

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : Present Address : ISTO - UMR7327
International audience
The pre-rift Mesozoic sequences of the Cretaceous passive margins fossilized in the North Pyrenean Zone (NPZ) are characterized by high temperature deformation in relation with thinning of the continental basement. Our compilation of chronological and geological data confirms a clear correlation between the distribution of the highest paleotemperatures in the pre-rift sedimentary cover and the loci of extreme crustal stretching. Geological evidences such as the occurrence of peridotite bodies directly underlying metamorphic pre-rift sediments indicate an early attenuation of the rifted continental crust. This leads us to propose a mechanism of rifting involving boudinage of the continental crust. The lateral extraction of the Paleozoic basement occurred under the pre-rift cover that is decoupled on the Triassic clays and evaporates. The thermal conditions allowing coeval ductile deformation of the crust and of the pre-rift sediments leaded to the widening of basins devoid of large faulted blocks. We discuss the implications on the origin and significance of the granulites and the relations between flysch deposition and high temperature metamorphism of the pre-rift sediments. In the NPZ, Albian-Cenomanian flysch sequences were deposited synchronously with the syn-metamorphic ductile deformation of the pre-rift sequences. Since the base of the flysch deposits also recorded locally the high-temperature tectonic event, we propose an original mechanism for the evolution of the basins involving continuous deformation of the pre-rift metamorphic sediments. At the scale of the Pyrenean domain, our results suggest a strong lateral variability in the tectonic style of passive margins, in direct link with their thermic pattern
ISSN: 0278-7407

insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432
https://hal-insu.archives-ouvertes.fr/insu-01017432/document
https://hal-insu.archives-ouvertes.fr/insu-01017432/file/tect20164.pdf
DOI : 10.1002/2013TC003471

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : New structural, microstructural, and 40Ar/39Ar data from the NW Massif Central (France) provide additional constraints on the timing and tectonic setting of late Variscan granite magmatism. Previous studies had emphasized the role of late orogenic extension in the emplacement of granite plutons in the Limousin region. In contrast, the new data set is consistent with syntectonic emplacement of magma in a dextral simple shear active from 350 to 300 Ma in a transpressional regime. As an alternative hypothesis to late orogenic extension, we propose that magmas migrated into tensional bridges between active P shears associated with a lithospheric shear zone comparable to a pop-up structure. The Galician region, in the western end of the Ibero-Armorican tectonic arc, exhibits major left-lateral ductile shear zones which can be interpreted as conjugate structures to the Limousin and Armorican shear zones. Citation: Ge´belin, A., M. Brunel, P. Monie´, M. Faure, and N. Arnaud (2007), Transpressional tectonics and Carboniferous magmatism in the Limousin, Massif Central, France: Structural and 40Ar/39Ar investigations
ISSN: 0278-7407

hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212
https://hal-insu.archives-ouvertes.fr/hal-00104212/document
https://hal-insu.archives-ouvertes.fr/hal-00104212/file/2005TC001822.pdf
DOI : 10.1029/2005TC001822

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
The brittle to ductile transition may strongly influence hydraulic properties of rocks at the depth and temperature ranges that hydrothermal fluids circulate. To examine this transition in the context of the oceanic crust, we conducted a series of deformation experiments on a natural basalt sample at in situ oceanic crust conditions. Dilatancy was measured during deformation. The method consisted in monitoring the volume of pore fluid that flows into or out of the sample at constant pore pressure. Mechanical and microstructural observations at experimental constant strain rate of 10−5 s−1 indicated that the basalt was brittle and dilatant up to 800°C. At higher temperature, the deformation mode became macroscopically ductile and samples compacted. These observations have important implications on heat transfer and fluid migration in oceanic crust.
ISSN: 0094-8276

hal-01172352
https://hal.archives-ouvertes.fr/hal-01172352
DOI : 10.1002/2015GL063437

Éditeur(s) : HAL CCSD American Geophysical Union (AGU)
Résumé : International audience
In this paper, a combined approach of geomorphic analyses, detailed geological mapping on SPOT 5 satellite images and field surveys, complemented by radiometric dating (Ar-40/Ar-39) allows proposing a new and consistent tectonic configuration for the northeastern Arabia-Eurasia collision zone. It favors a simple strike-slip faulting mechanism in NE Iran accommodating the northward motion of central Iran with respect to Eurasia between the Binalud and Kopeh Dagh mountains. Our results demonstrate that similar to 2 mm/a (similar to 25%) of this northward motion has been transferred from the Binalud to the Kopeh Dagh through the Meshkan Transfer Zone since similar to 5 Ma. The modern state of stress deduced from fault kinematics analyses shows N30 degrees E trending maximum stress axis and confirms a dominant strike-slip faulting mechanism. Combining our geological data with other available data, we conclude that kinematics of deformation can be appropriately described by rigid block faulting in NE Iran; instead, the continuous deformation as it has been thought during the last 3 decades.
ISSN: 0278-7407

hal-00420909
https://hal.archives-ouvertes.fr/hal-00420909
DOI : 10.1029/2008TC002444