Éditeur(s) : HAL CCSD Elsevier
Résumé : Deficient sealing in the well cement plugs and annulus due to mechanical fracturing is an important risk of CO2 leakage from the reservoir to others permeable layers and the surface. Such situation was reproduced at laboratory scale in order to determine the hydro-chemical control on the fracture permeability. Specifically, we investigated the effect of CO2 rich-brine flowing through fractured Portland cements at T = 60 °C and P = 10 MPa and variable flow rates. We showed that carbonation process is dominant and induces permeability decrease and leakage mitigation for extremely low flow rate whereas for high flow rate injection the permeability remains constant due to the precipitation of a low density secondary Si-rich phase which maintains the initial fracture aperture. At intermediate flow rate the hydraulic aperture can increase due to the densification of the material triggered by the net precipitation of low porosity calcite. These results emphasize that more complex behaviors than those considered from batch experiments may take place in the vicinity of flowing fractures. Specifically, the redissolution of the neoformed calcite as well as the development of amorphous phases, both controlled by the CO2-rich brine renewing rate in the fracture may prevent the healing fracture.
ISSN: 1750-5836

hal-00857555
https://hal.archives-ouvertes.fr/hal-00857555
DOI : 10.1016/j.ijggc.2013.04.002

Éditeur(s) : HAL CCSD BioMed Central
Résumé : International audience
Background: Color polymorphism in the nacre of pteriomorphian bivalves is of great interest for the pearl culture industry. The nacreous layer of the Polynesian black-lipped pearl oyster Pinctada margaritifera exhibits a large array of color variation among individuals including reflections of blue, green, yellow and pink in all possible gradients. Although the heritability of nacre color variation patterns has been demonstrated by experimental crossing, little isknown about the genes involved in these patterns. In this study, we identify a set of genes differentially expressed among extreme color phenotypes of P. margaritifera using a suppressive and subtractive hybridization (SSH) method comparing black phenotypes with full and half albino individuals.Results: Out of the 358 and 346 expressed sequence tags (ESTs) obtained by conducting two SSH libraries respectively, the expression patterns of 37 genes were tested with a real-time quantitative PCR (RT-qPCR) approach by pooling five individuals of each phenotype. The expression of 11 genes was subsequently estimated for each individual in order to detect inter-individual variation. Our results suggest that the color of the nacre is partiallyunder the influence of genes involved in the biomineralization of the calcitic layer. A few genes involved in the formation of the aragonite tablets of the nacre layer and in the biosynthesis chain of melanin also showed differential expression patterns. Finally, high variability in gene expression levels were observed within the black phenotypes.Conclusions: Our results revealed that three main genetic processes were involved in color polymorphisms: the biomineralization of the nacreous and calcitic layers and the synthesis of pigments such as melanin, suggesting that color polymorphism takes place at different levels in the shell structure. The high variability of gene expression found within black phenotypes suggests that the present work should serve as a basis for future studies exploringmore thoroughly the expression patterns of candidate genes within black phenotypes with different dominant iridescent colors.
ISSN: 1471-2164

hal-01260141
https://hal.archives-ouvertes.fr/hal-01260141
https://hal.archives-ouvertes.fr/hal-01260141/document
https://hal.archives-ouvertes.fr/hal-01260141/file/Lemer-2015-BMCGenom-Identification.pdf
DOI : 10.1186/s12864-015-1776-x

Éditeur(s) : HAL CCSD
Résumé : Thrusting fault zone in foreland basins are characterized by highly foliated zones generally enriched in phyllosilicates which can play a major role on the mechanical behaviour of the fault. In this context, investigations of synkinematic clay minerals permit to determine the origin of the fluid from which they precipitated as well as the mechanisms of deformation. Our study is focused on clay mineral assemblages (illite and chlorite) in a major thrust fault located in the Monte Perdido massif (southern Pyrenees), a shallow thrust that affects upper cretaceous-paleocene platform carbonates and lower Eocene marls and turbidites. It implied 3 km of displacement of the Monte Perdido thrust unit with respect to the underlying Gavarnie unit. In this area the cleavage development by pressure-solution is linked to the Monte Perdido and Gavarnie thrust activity. The core zone of the fault, about 6 m thick, consists of an interval of intensely deformed clay-bearing rocks bounded by major shear surfaces. The deformed sediment is markedly darker than the protolith. Calcite-quartz shear veins along the shear planes are abundant. Detailed SEM and TEM observations of highly deformed fault zone samples indicate that clay mineral enrichment in the core zone of the fault is not only related to passive increase by pressure-solution mechanism but that dissolution-recrystallization of phyllosilicates occurs during deformation. A mineral segregation is observed in the highly deformed zone. Newly formed 2M 1 muscovite is present along the cleavage whereas IIb chlorite crystals fill SV2 shear veins suggesting syntectonic growth of phyllosilicates in the presence of fluids in low-grade metamorphic conditions. These mineralogical reactions act as weakening processes and would favour Monte Perdido fault creeping.
Swiss Journal of Geosciences

hal-00795553
https://hal.archives-ouvertes.fr/hal-00795553
DOI : 10.1007/s00015-012-0098-0

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : Results are reported for an acidic water flow-through experiment conducted in a fractured argillaceous limestone sample (73% carbonates). The change in fracture geometry and related parameters is reported for six data sets obtained from synchrotron X-ray microtomography experiments. High-resolution three-dimensional images of the sample allowed quantification of the changes in fracture morphology at a spatial resolution of 6 ;μm. Mineral mass loss and permeability changes in the sample were also determined. Several physico-chemical phenomena were identified during the experiment. Initial smooth fracture surfaces evolved rapidly toward rough surfaces with uneven clay coverage due to the preferential dissolution of carbonate minerals compared to clay minerals whose dissolution rate is about 106 slower. A microporous clay coating progressively developed at the fluid-rock interface during heterogeneous dissolution of the fracture, while the global dissolution rate of the fracture walls exponentially decreased. The increase in surface roughness and the presumed reorganization of clays caused a progressive reduction in permeability. During the last flow-through stage, a large decrease in sample permeability was attributed to the large removal of clay particles; this process was responsible for a dramatic collapse of the fracture walls near the sample inlet and led to the development of preferential flow pathways. The development of the clay coating also acted as a barrier to flow and mass transfer between calcite grains and bulk solution and affected transport processes within the fracture
ISSN: 0043-1397

hal-00405333
https://hal.archives-ouvertes.fr/hal-00405333
DOI : 10.1029/2006WR005379

Éditeur(s) : HAL CCSD Springer
Résumé : International audience
Thermoelastic behavior of different marble types was analyzed using computational modeling and experimental measurements. Eight marble samples with different composition, grain size, grain boundary geometry, and texture were investigated. Calcitic and dolomitic marbles were considered. The average grain size varies from 75 μm to 1.75 mm; grain boundary geometry differs from nearly equigranular straight grain boundaries to inequigranular-interlobate grain boundaries. Four typical marble texture types were observed by EBSD measurements: weak texture; strong texture; girdle texture and high-temperature texture. These crystallographic orientations were used in conjunction with microstructure-based finite element analysis to compute the thermoelastic responses of marble upon heating. Microstructural response maps highlight regions and conditions in the marble fabric that are susceptible to degradation phenomena. This behavior was compared to the measured thermal expansion behavior, which shows increasing residual strains upon repetitive heating-cooling cycles. The thermal expansion behavior as a function of temperature changes can be classified into four categories: (a) isotropic thermal expansion with small or no residual strain; (b) anisotropic thermal expansion with small or no residual strain; (c) isotropic thermal expansion with a residual strain; and (d) anisotropic thermal expansion with residual strain. Thermal expansion coefficients were calculated for both simulated and experimental data and also modeled from the texture using the MTEX software. Fabric parameters control the amount and directional dependence of the thermal expansion. Marbles with strong texture show higher directional dependence of the thermal expansion coefficients and have smaller microstructural values of the maximum principal stress and strain energy density, the main precursors of microcracking throughout the marble fabric. In contrast, marbles with weak texture show isotropic thermal expansion behavior, have a higher propensity to microcracking, and exhibit higher values of maximum principal stress and strain energy density. Good agreement between the experimental and computational results is observed, demonstrating that microstructure-based finite-element simulations are an excellent tool for elucidating influences of rock fabric on thermoelastic behavior.
ISSN: 1866-6280

hal-00858095
https://hal.archives-ouvertes.fr/hal-00858095
DOI : 10.1007/s12665-013-2406-z

Éditeur(s) : HAL CCSD
Résumé : International audience
In orogens, shortening is mainly accommodated by thrusts, which constitute preferential zones for fluid–rock interactions. Fluid flow, mass transfer, and mineralogical reactions taking place along thrusts have been intensely investigated, especially in sedimentary basins for petroleum and uranium research. This study combines petrological investigations, mineralogical quantifications, and geochemical characterizations with a wide range of analytical tools with the aim of defining the fluid properties (nature, origin, temperature, and redox) and fluid–host rock interactions (mass transfers, recrystallization mechanisms, and newly formed synkinematic mineralization) in the Pic-de-Port-Vieux thrust fault zone (Pyrenees, Spain). We demonstrate that two geochemically contrasted rocks have been transformed by fluid flow under low-grade metamorphism conditions during thrusting. The hanging-wall Triassic red pelite was locally bleached, while the footwall Cretaceous dolomitic limestone was mylonitized. The results suggest that thrusting was accompanied by a dynamic calcite recrystallization in the dolomitic limestone as well as by leaching of iron via destabilization of iron oxides and phyllosilicate crystallization in the pelite. Geochemical and physical changes highlighted in this study have strong implications on the understanding of the thrust behavior (tectonic and hydraulic), and improve our knowledge of fluid–rock interactions in open fluid systems in the crust.
Contributions to Mineralogy and Petrology

hal-01575548
https://hal-univ-fcomte.archives-ouvertes.fr/hal-01575548
DOI : 10.1007/s00410-017-1394-5

Éditeur(s) : HAL CCSD
Résumé : In coastal carbonate aquifers submitted to a saline intrusion, water - rock interactions processes at the interface between freshwater and saltwater are a cause for heterogeneities development within the porous media. The dissolutions and precipitations induced by the mixing zone play a major role in the transport properties of the reservoir and so in the long term evolution of the saltwater intrusion. The characterization and the in situ observation of a current saline intrusion in the Llucmajor carbonate platform at the experimental site of Ses Sitjoles (South-Easth of Mallorca Island, Spain), allowed to study the temporal evolution of the saltwater intrusion and the biogeochemical processes active in the mixing zone. The influence of microstructure, characterized using X-Ray microtomography, on the petrophysical and flow properties was investigated in laboratory and flow-through experiments were also conducted to study the modifications of the microstructures when submitted to water - rock interactions processes. The mixing zone at the Ses Sitjoles site appears as quite thick and not very sensitive to climate and anthropic stress and is proved to be the locus of active microbiological activity. Laboratory studies highlight a strong control of the microporosity on transport processes and of pCO2 on water - rock interactions. The percolation experiments of slightly reactive waters reveal calcite dissolution together with a decrease in permeability due to a rearrangement of micro-grains within the microporous network.
Les processus d'interactions fluide-roche à l'interface eau douce-eau salée, dans les aquifères carbonatés côtiers soumis à une intrusion saline, sont une des causes du développement d'hétérogénéités dans la structure du milieu poreux. Les dissolutions et/ou précipitations engendrées par la présence de cette zone de mélange jouent un rôle déterminant pour les propriétés de transport du réservoir et donc l'évolution à long terme de l'intrusion d'eau salée. En prenant l'exemple de la plateforme carbonatée de Llucmajor au niveau du site expérimental de Ses Sitjoles (Sud-Est de Majorque, Espagne), un travail de caractérisation et d'observation in situ à moyen terme de l'intrusion saline actuelle de ce réservoir permet de décrire son évolution temporelle et les processus biogéochimiques actifs dans la zone de mélange. L'influence de la microstructure du milieu poreux, caractérisée par microtomographie RX, sur les propriétés pétrophysiques et hydrodynamiques est étudiée en laboratoire et des expériences de percolations d'eaux réactives (mélanges eau douce - eau salée et eau pure chargée en CO2) sont réalisées afin d'étudier les modifications de ces microstructures lorsqu'elles sont soumises à des interactions eau - roche. La zone de mélange eau douce - eau salée rencontrée au niveau du site de Ses Sitjoles est large et peu sensible aux contraintes extérieures (climatologiques et anthropiques) et constitue un lieu d'activité microbiologique particulièrement actif. En laboratoire, on observe un fort contrôle des phénomènes de transport par la microporosité et des processus d'interactions eau - roche par la pCO2. Dans le cas d'une percolation de fluides moyennement réactifs, les expériences mettent en évidence une dissolution de calcite accompagnée par une diminution de la perméabilité, liée à un réarrangement des micro-grains à l'intérieur du réseau microporeux.
https://tel.archives-ouvertes.fr/tel-00767152

tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152
https://tel.archives-ouvertes.fr/tel-00767152/document
https://tel.archives-ouvertes.fr/tel-00767152/file/thesegaring.pdf

Éditeur(s) : HAL CCSD
Résumé : The Restefond fault, located in the Late Eocene-Early Oligocene Alpine foreland basin, affects the well lithified and low porosity Grès d'Annot. The fault core zone is characterized by the occurrence of highly deformed sandstone lenses. Deformation inside the lenses corresponds to mm to sub-mm-spaced cleavage planes rich in phyllosilicates and up to cm-thick and dm-long quartz-calcite pure extensional veins. The cleavages are mostly composed of newly-formed synkinematic white mica and chlorite. By using thermodynamic thermometers based on the chemical composition of chlorite, a temperature of 200 ± 20 °C of fault activity was computed. This temperature shows that the Restefond fault was active at burial conditions comprised between 6.5 and 8 km, assuming a mean geothermal gradient between 25 and 30 °Ckm−1. The petrophysic properties of sandstones from the core zone and in the hanging and foot wall of the fault were determined on drilled plugs following three spacial directions. The permeability of the highly deformed sandstone from the core zone is about one order of magnitude higher than in the host rock. This increase in permeability occurs in the direction parallel to the S-C structures and is explained by the occurrence of well-connected micropores localized between platy phyllosilicates. This study shows that the fault petrophysic properties are mostly controlled by the precipitation of synkinematic phyllosilicates under deep burial conditions.
Swiss Journal of Geosciences

hal-00795551
https://hal.archives-ouvertes.fr/hal-00795551
DOI : 10.1007/s00015-012-0099-z

Éditeur(s) : HAL CCSD Springer
Résumé : The analysis of three different regions of the South- Pyrenean fold-and-thrust belt reveals that during the Tertiary compression the hydrological system was compartmentalised in time and space. During the early-middle Eocene, when the thrust front affected marine soft-sediments in the Ainsa basin, the thrust fault zones were dominated by formation fluids derived from Eocene marine waters trapped in the underlying Eocene marls, although influences of meteoric waters were also present. During the middle-late Eocene, when the thrust front emplaced marine rocks over continental redbeds in the eastern Catalan basin (L'Escala thrust), the thrust fault zones were dominated by meteoric fluids. These fluids flowed preferentially along these faults, draining laterally the meteoric fluids and acting as barriers hindering their flowing towards more external parts of the belt. During the Oligocene, the most external part of the fold-and-thrust belt in the eastern Catalan basin developed on top of a salt detachment horizon. The thrust front affected continental materials of late Eocene-Oligocene age. At this moment, the thrusts were conduits for meteoric fluids arriving from the surface and also for evolved meteoric fluids migrating over short distance upwards after being in contact with the underlying evaporitic beds. Most of the fractures show a similar sequence of microfractures. Microfractures of stage 1 formed when the sediment was poorly lithified. Microfractures of stage 2 represent the main episode of vein formation which developed when a progressive induration of the host sediment occurred. During microfracture stage 3, formed in an extensional regime, the host sediment was more indurated. The repetition of this sequence of microfractures in different fracture generations of the same outcrop indicates that the sediment induration was restricted to the vicinity of the vein. Away from the veins, the sediment remained poorly lithified during the entire deformation cycle. Calcite cement within the host rock precipitated later than the syn-compressive veins, when the sediment was more indurated. Elemental geochemistry and stable isotopes of the calcite veins indicates that early generation of microfractures is infilled by local fluids (either marine or meteoric), whereas external fluids (meteoric or evolved meteoric) infilled the main compressive stage of microfractures. The hot temperature of these fluids (157°C to 183°C in the Atiart-Arro example) indicates their circulation through deep parts of the thrust belt. The progressive increase of the 87Sr/86Sr ratio through time is due to the progressive uplift, exposure and erosion of the internal Pyrenean Axial Zone.
Thrust belts and foreland basins, from fold kinematics to hydrocarbon systems

hal-00408001
https://hal.archives-ouvertes.fr/hal-00408001
DOI : 10.1007/978-3-540-69426-7_5

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
A CO2-rich brine core-flood experiment in calcite limestone for conditions representative of underground storage (P = 12 MPa and T = 100°C) was performed in order to explore the dissolution mechanisms arising at moderate CO2 partial pressure (0.3 MPa). An increase of the total porosity (φT) accompanied by a persistent permeability (k) decrease was measured. The mechanisms controlling this atypical anticorrelated k − φT relationship were investigated from the analysis of high-resolution X-ray microtomography images of the sample acquired before and after the experiment. All the evidences converge to the conclusion that the ubiquitous decrease of permeability measured during the 44 h of dissolution is due to the clogging of a fraction of the macroporosity by microporous material triggered by the rearrangement of the detached undissolved particles. This mechanism results in the development of low permeability zones bridging the macroporosity.
ISSN: 0094-8276

hal-00903585
https://hal.archives-ouvertes.fr/hal-00903585
DOI : 10.1002/grl.50595

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
The Sapat peridotite in Kohistan (NW Pakistan) is a 12x1 km sized body of meta-harzburgites, dunites, pyroxenites and meta-gabbros in the hanging wall of the Indus Suture Zone. Field relations, micro-textures, bulk and mineral chemistry document melt-rock reactions producing dunites at the expense of meta-harzburgites, and a consecutive olivine-clinopyroxenite formation from the same melt type. The association of mesa-gabbros, dunites, and pyroxenites is interpreted as a crust-mantle transition zone produced by the percolation of highly depleted primitive arc melt. The meta-harzburgites represent large portions of refractoty mantle that have suffered melt extraction and metasomatism prior to their interaction with the dunite-forming primitive arc melt and the establishment of the crust-mantle transition zone. Uncommon vein assemblages in the dunites that include Cr-clinochlore, calcite and olivine document a late percolation of slab-related, volatile-rich fluids. Taking into account the highly refractory composition of the Sapat mantle, its structural position, the evidence for interaction with highly depleted arc melts and the sub-solidus interaction with volatile-rich arc fluids, the Sapat ultramafic rocks are interpreted as being derived from the frontal Kohistan arc, representing a crust-mantle transition formed by arc magmatism.
ISSN: 0024-4937

hal-00424515
https://hal.archives-ouvertes.fr/hal-00424515
DOI : 10.1016/j.lithos.2008.07.004

Éditeur(s) : HAL CCSD
Résumé : National audience
Un ensemble de données sur l’environnement géologique despéridotites de la Zone Nord-Pyrénéenne a été obtenu dans lecadre des programmes ANR Pyramid et RGF-BRGM consacrésà l’évolution géodynamique des Pyrénées. Ces données représententdes contraintes indispensables pour l’étude des processus del’exhumation du manteau, de l’amincissement de la croûte continentaleet de sa disparition complète lors de l’ouverture desbassins transtensifs albo-cénomaniens. On y trouve : (1) de nouveauxlevés géologiques de détail autour des lherzolites de Lherz-Freychinède-Vicdessos-Bestiac-Prades et d’Urdach-Les Pernes et(2) des analyses multi-méthodes des métasédiments de la couvertureprérift et du socle paléozoïque adhérent au manteau :composition des assemblages du métamorphisme HT, températuresmaximales par spectrométrie RAMAN sur la m.o., fabriquede la calcite par EBSD, inclusions fluides et isotopes stables dansles marbres et veines associées, datations U-Th-Pb in situ. Cesdonnées permettent d’estimer les conditions thermiques lors de laremontée du manteau et de sa mise à l’affleurement. Nous montronsune variabilité remarquable de l’Ouest vers l’Est.A l’Ouest, le manteau est exhumé à l’Albien sup. - Cénomanieninf. en perçant une couverture mésozoïque prérift qui n’a pas étéchauffée à plus de 250C. La croûte continentale supérieure y estréduite en lames ductiles extrêmement amincies puis cataclaséeset remaniées sur le fond ultrabasique avec des fragments de manteauet de la couverture prérift, durant le dépôt du flysch noir. Latempérature augmente au cours du Cénomanien (480C) dans leszones où le manteau n’a pas été mis à l’affleurement. Le Triassupérieur se transforme profondément (talc-chlorites) et perd sacomposante évaporitique. La couverture prérift décollée joue unrôle majeur comme couvercle isotherme, suivi en cela par les flyschsalbiens puis cénomaniens.A l’Est, le manteau perce à travers une couverture chauffée localementà plus de 600C. Le Keuper y est réduit à quelquesdécimètres de grès et brèches riches en saphirine. La croûtesupérieure a été presque totalement éliminée tectoniquement, maisdes granulites sont remaniées à côté des péridotites et des marbresdans les brèches recouvrant le manteau exhumé.Ces données de terrain représentent les contraintes de base pourconstruire les modèles d’amincissement crustal. La variabilitémise en évidence (gradient thermique et présence ou absence decroûte profonde remaniée) ne permet pas de proposer un modèled’amincissement simple et unique. Cependant, toutes ces donnéesindiquent que la croûte moyenne à supérieure se comporteductilement sous les écrans thermiques de la couverture prériftet synrift, mobiles sur le Keuper. Un modèle de marge passivedistale faisant appel à des blocs continentaux rigides de type ”extensional allochthons ” ne peut s’appliquer ici. Sur la base deces données géologiques, nous mettons donc en avant un nouveaumodèle de type marge distale chaude plus ou moins transtensive.
RST 2016, livre des résumés
Caen, France

insu-01388463
https://hal-insu.archives-ouvertes.fr/insu-01388463

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Gold mineralisation in the Yatela Main gold mine is hosted in a saprolitic residuum situated above Birimian supracrustal rocks, and at depth. The supracrustal rocks comprise metamorphosed calcitic and dolomitic marbles that were intruded by diorite (2106 ± 10 Ma, 207Pb/206Pb), and sandstone-siltstone-shale sequences (youngest detrital zircon population dated at 2139 ± 6 Ma). In-situ gold-sulphide mineralisation is associated with hydrothermal activity synchronous to emplacement of the diorite and forms a sub-economic resource; however, the overlying saprolitic residuum hosts economic gold mineralisation in friable lateritized palaeosols and aeolian sands (loess).Samples of saprolitic residuum were studied to investigate the morphology and composition of gold grains as a proxy for distance from source (and possible exploration vector) because the deposit hosts both angular and detrital gold suggesting both proximal and distal sources. U–Pb geochronology of detrital zircons also indicated a proximal and distal source, with the age spectra giving Archaean (2.83–3.28 Ga), and Palaeoproterozoic (1.95–2.20 Ga) to Neoproterozoic (1.1–1.8 Ga) zircons in the Yatela depocentre. The 1.1–1.8 Ga age spectrum restricts the maximum age for the first deposition of the sedimentary units in the Neoproterozoic, or during early deposition in the Taoudeni Basin. Models for formation of the residuum include distal and proximal sources for detritus into the depocentre, however, it is more likely that material was sourced locally and included recycled material. The creation of a deep laterite weathering profile and supergene enrichment of the residuum probably took place during the mid-Cretaceous-early Tertiary.
ISSN: 0899-5362

hal-01277679
https://hal.archives-ouvertes.fr/hal-01277679
DOI : 10.1016/j.jafrearsci.2015.07.017

Éditeur(s) : HAL CCSD Elsevier
Résumé : Different types of fractures and fault rocks occur within the major normal fault zones bordering the NW of the Neogene Penedes basin (NE Spain). In the southwest part of the basin, the main fault is the Baix Penedes fault that places the Upper Jurassic-Lower Cretaceous dolomicrites of the footwall in contact with the Miocene siliciclastic sediments of the hangingwall. Within the footwall damage zone, different fracture systems and their respective associated breccias and cements have been recognized. Using a combination of structural, petrologic and geochemical analyses, we show that these fracture systems evolved from mainly tectonic to mainly karstic features during the progressive development and upward propagation of the fault. The earlier fractures and associated breccias represent the initial stages of the fault propagation, when the process zone formed around the fault tip was dominated by dilatant fracturing (fractures 1 and dilatant breccias B1). The fluid involved in this early deformation precipitated the dolomite cement Cl, in equilibrium with the host-rock in a closed hydrogeological system. Localization of frictional processes generated cataclasites and ultracataclasites along distinct second-order faults (fractures 2). In these fractures, the dolomite cement C2 precipitated in relation to the incipient opening of the hydrological system to percolating meteoric waters. The later fractures and associated breccias represent the late stages of the fault propagation. These structures (fractures 3, fractures 4 and the dilatant breccias B2) were formed when the extensional deformation reached the surface, resulting in an increasingly open hydrogeological system. At these stages, deposition of the dolomitic sediment DS and precipitation of the calcite cements C3, C4 and C5 show the circulation of freshwaters in a vadose meteoric environment, i.e. in karstic conditions.
ISSN: 0375-6742

hal-00512690
https://hal.archives-ouvertes.fr/hal-00512690
DOI : 10.1016/j.gexplo.2009.11.010

Éditeur(s) : HAL CCSD Wiley-Blackwell
Résumé : This study describes normal fault zones formed in foreland arkosic turbidites (the Grès d'Annot Formation, SW French Alps) under deep diagenesis conditions (~200 °C) and highlights the occurrence of two markedly different fault-rock types: (1) the foliated fault rocks of the Moutière-Restefond area; and (2) the dilatant fault rocks of the Estrop area. The deformation of (1) is dominated by intra- and transgranular fracturing, pressure solution of quartz and feldspar grains and syn-kinematic phyllosilicate precipitation resulting from feldspar alteration. The combination of these mechanisms results in a strongly anisotropic strain with intense shortening normal to the foliation (pressure solution) and extension parallel to the foliation (quartz- and calcite-sealed extension veins). This deformation implies local mass transfer that may be achieved without (or with limited) volume change. The deformation of (2) is expressed as dilatant quartz-sealed veins and breccia textures in which the main mechanisms are transgranular fracturing and quartz precipitation. Type (2) implies fault volume increase, isotropy of deformation and mass transfer at distances larger than in type (1). This study discusses the origins of (1) and (2) and shows that the permeability of (1) is anisotropic, with higher values than the host rocks parallel to the Y main deformation axis (i.e. perpendicular to the slip vector), whereas the permeability of (2) is isotropic and equivalent to that of the host rocks.
ISSN: 0954-4879

hal-01115177
https://hal.archives-ouvertes.fr/hal-01115177
DOI : 10.1111/ter.12100

Éditeur(s) : HAL CCSD
Résumé : The main purpose of this thesis was to characterize and to model the hydrodynamic and thermochemical processes leading to the alteration of the wellbore cement materials under borehole conditions. Percolation experiments were performed on fractured cement samples under CO2 storage conditions (60°C and 10MPa). Injection flow rate was dictated by the fracture aperture of each sample. CO2 enriched brine was flowed along the fracture aperture, and permeability changes as well as chemical evolution of major cations were continuously acquired during the experiment time. Reaction paths developed by the alteration of the cement were characterized using microtomography and ESEM images. The experiments conducted using samples presenting large fracture apertures during 5h showed that permeability was maintained constant during the experiment time. Three reacted layers were displaying by the alteration of portlandite and CSH. Long term experiment (26h) conducted with large initial fracture aperture showed a decrease of the permeability after 15hours of CO2 exposure. Otherwise, experiments performed on samples presenting narrow apertures indicated the conversion of portlandite and CSH to calcite leading to the permeability reduction and the fracture clogging. Assemblages of phases and chemical changes were modelled using GEMS-PSI speciation code. We studied also using a coupled transport-reactive model the conditions leading to the cement alteration and the formation of associated layers.
L'objectif de cette thèse était de modéliser à partir des expériences de percolation-réactive, les processus hydrodynamique et réactionnel qui gouvernent l'altération des ciments de puits. Différentes expériences ont été réalisées dans des conditions représentatives de celles du stockage du CO2. Des échantillons fracturés ont été utilisés pour injecter une saumure enrichie en CO2 à 60°C et 10MPa et à différentes pressions partielles de CO2. Le débitd'injection variait en fonction des propriétés hydrauliques de l'échantillon exposé. L'injection d'une saumure enrichie en CO2 à débit constant à travers une fracture supposée plane a permis d'étudier les modifications des propriétés hydrodynamiques et ces conséquences sur la géochimie et la microstructure du ciment altéré. L'impact dynamique de l'évolution microstructurale a été mis en évidence. Les expériences conduites sur des échantillons présentant de larges ouvertures, réalisées sur une durée de 5 h, ont montré que la perméabilité était maintenue constante le long de l'expérience. Trois couches d'altération se sont développées consécutivement à la dissolution de la portlandite et la décalcification des CSH. L'altération a entrainé la précipitation des carbonates et de la silice amorphe à proximité de la fracture. Dans le cas d'une expérience longue durée appliquant les mêmes conditions que précédemment on a observé que la croissance de la silice amorphe a entrainé la diminution de la perméabilité. Par ailleurs les expériences effectuées sur des échantillons présentant de faibles ouvertures, ont indiqué que la conversion de la portlandite en calcite conduit au colmatage de la fracture. L'évolution des assemblages de phases conduisant à la formation des carbonates et de la silice amorphe a été modélisée à partir du code géochimique GEMS. Les mécanismes de diffusion et les processus de mise en place des couches d'altération ont été étudiés à partir d'un modèle analytique et d'un modèle de transport réactif à partir du code géochimique PHREEQC.
https://tel.archives-ouvertes.fr/tel-01038034

tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034
https://tel.archives-ouvertes.fr/tel-01038034/document
https://tel.archives-ouvertes.fr/tel-01038034/file/theseabdoulghafour.pdf

Éditeur(s) : HAL CCSD Geological Society of America
Résumé : International audience
Fluid-rock interactions can control earthquake nucleation and the evolution of earthquake sequences. Experimental studies of fault frictional properties in the presence of fluid can provide unique insights into these interactions. We report the first results from experiments performed on cohesive silicate-bearing rocks (microgabbro) in the presence of pressurized pore fluids (H2O, drained conditions) at realistic seismic deformation conditions. The experimental data are compared with those recently obtained from carbonate-bearing rocks (Carrara marble). Contrary to theoretical arguments, and consistent with the interpretation of some field observations, we show that frictional melting of a microgabbro develops in the presence of water. In microgabbro, the initial weakening mechanism (flash melting of the asperities) is delayed in the presence of water; conversely, in calcite marble the weakening mechanism (brittle failure of the asperities) is favored. This opposite behavior highlights the importance of host-rock composition in controlling dynamic (frictional) weakening in the presence of water: cohesive carbonate-bearing rocks are more prone to slip in the presence of water, whereas the presence of water might delay or inhibit the rupture nucleation and propagation in cohesive silicate-bearing rocks.
ISSN: 0091-7613

hal-01054327
https://hal.archives-ouvertes.fr/hal-01054327
DOI : 10.1130/G34916.1

Éditeur(s) : HAL CCSD American Geophysical Union
Résumé : International audience
Claystone caprocks are often the ultimate seal for CO2 underground storage when residual CO2 gas reaches the reservoir top due to buoyancy. Permeability changes of a fractured claystone due to seepage of CO2-enriched brine and water vapor-saturated CO2 gas are investigated. Results show that brine flow induces a large porosity increase (up to 50%) in the vicinity of the fracture due to dissolution of calcite and quartz, while permeability remains unchanged. Conversely, cyclic flows of CO2-brine and CO2-gas increase the fracture aperture abruptly after each gas flow period, producing a progressive decrease of the caprock seal capacity. Aperture increase is controlled by decohesion of the clay framework within a micrometer-scale-thick layer induced by CO2-gas acidification. Results show that hydraulic aperture increases linearly with duration of the preceding CO2-brine flow period, emphasizing the kinetic control of the quartz grains dissolution during the brine flow periods.
ISSN: 0094-8276

hal-00412332
https://hal.archives-ouvertes.fr/hal-00412332
DOI : 10.1029/2008GL034467

Éditeur(s) : HAL CCSD American Geophysical Union (AGU) American Geophysical Union
Résumé : International audience
Environmental magnetism of speleothems is still in its early stage of development. Here we report on our investigation of the environmental and paleomagnetic information that has been recorded in speleothems, and what are the factors that control its preservation and reliability. To address these issues, we used a multidisciplinary approach, including rock magnetism, petrography, scanning electron microscopy, stable carbon and oxygen isotope compositions, and major and trace element concentrations. We applied this to a set of samples from different stages of speleothem evolution: present-day dripwater (glass plates), a weathered stalactite, a fresh stalagmite, cave sediments, and terra rossa soils. These samples come from the Penico and Excentricas caves, located in two distinct aquifers of the Algarve region, South Portugal. Our results show that the main magnetic carriers of the speleothems under study are primary (detrital) and consist of maghemite (and magnetite?). Similarities in coercivity and temperature dependence of the studied set of samples suggest that iron oxides are inherited from the terra rossa soils that cap the cave and were transported to the speleothems by dripwater. Hence, they represent a regional environmental signature. Interestingly, a stable and probably detrital remanent magnetization could be isolated in the fresh stalagmite, whereas the weathered stalactite yielded chaotic magnetic directions and very low remanent intensities. We propose that these low intensities can be the result from (i) different remanence acquisition mechanisms between stalagmite and stalactite and/or (ii) iron dissolution by fungal activity. We also suggest that magnetic properties and color and the content in detrital elements in the fresh speleothem inform about environmental processes acting on the interface of rock (soil)-atmosphere, while oxygen isotope composition and alkaline-earth element concentrations inform about calcite-water interaction processes. These results provide a better understanding of how environmental information is recorded in speleothems and what the factors are that control the reliability of the paleomagnetic and paleo-environmental signal.
ISSN: 0148-0227

hal-01114953
https://hal.archives-ouvertes.fr/hal-01114953
DOI : 10.1002/2014JB011381

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We review the evolution of concepts on and methods of estimating the state of stress from fault movements. Theories of failure in isotropic materials suggested a simple geometrical construction of optimal principal stress directions from a fault plane and its associated slip. These optimal directions align shear stress and slip directions and maximize the difference between shear stress and frictional resistance on the fault plane. Optimal stress directions for calcite twinning are obtained by a similar construction, with the difference that they maximize shear stress. Force representation of seismic sources independently introduced pressure, P, and tension, T, axes at positions that also maximize shear stress on both nodal planes. Frictional slip theory and the constraint that slip and shear stress directions be parallel allowed to address reactivation of pre-existing faults. This suggested that stress could also be inverted from reactivated fault and slip data or earthquake focal mechanisms. Early methods relied on geometrical constructions as a substitute for calculations, whereas later methods relied on software as these calculations became tractable with the help of computers. Similar methods were developed for the inversion of stress from crystal twin gliding with non-optimal geometry, with a different criterion that relies on a threshold of the component of shear stress along the gliding line. Even though these methods seek a common stress tensor compatible with fault and slip data, their main use is to separate polyphase data into homogeneous subsets and help deciphering complex tectonic histories. Fault and slip data can also be analyzed to constrain the strain rather than the stress tensor. In most cases this involves a summation and yields an average strain for the considered rock volume. Stress inversion thus appears better suited for differentiating heterogeneous data whereas strain analysis appears better suited for homogenizing them.
ISSN: 0040-1951

hal-00759043
https://hal.archives-ouvertes.fr/hal-00759043
DOI : 10.1016/j.tecto.2012.02.009